Product Parameter Table
|
Product Name |
Aluminum Honeycomb Panel (Slim Edge Wall & Door Series) |
|
Brand |
CHAOEN |
|
Material |
Aluminum Alloy 3003/5052 Face + Hexagonal Aluminum Honeycomb Core + Aluminum Back Sheet |
|
Core Structure |
Hexagonal Aluminum Foil Honeycomb, vertically oriented cells, 6 mm cell size |
|
Fire Resistant Level |
Class A2 (Non-Combustible Aluminum Honeycomb Core) |
|
Temperature Resistance |
-50 C to 120 C |
|
Water Absorption |
0% - Fully Waterproof, No Swelling |
|
Impact Resistance |
Excellent, No Cracking or Delamination |
|
Formaldehyde Emission |
Zero Emission - 100% Inorganic Aluminum Construction |
|
Edge Treatment |
CNC Precision Cut for Hairline Butt Joints |
|
Grain Matching |
Continuous Grain Alignment Across Adjacent Panels |
|
Finish Library |
200+ Colours and Wood Grains |
|
Use |
Feature wall cladding, interior doors, ceiling panels, hotel corridors, office partitions, showrooms, retail fit-outs, whole-house custom interiors |
|
Standard Size |
1220 x 2440 mm (Custom up to 1500 x 4000 mm) |
|
MOQ |
500 Square Meter / Each Colour or Finish |
|
Sample |
Free Sample Available |
|
Payment |
T/T, L/C, Western Union, Trade Assurance |
|
Packing |
Pallet + Corrugated Carton with Corner Protectors, PE Foam Interlayer |
|
Certification |
CE · ROHS |
Product Introduction
CHAOEN Aluminum Honeycomb Panel (Slim Edge Wall & Door Series) is specified where the joint is the detail. Panels are CNC cut to a precise dimension so adjacent boards butt together in a hairline seam, and grain can be sequenced across a run so a clad wall reads as one continuous surface rather than a series of separate boards.
Detailed Description
Joints that disappear. On a clad wall the eye goes straight to the seams. Precision cutting holds panel dimensions tight enough for hairline butt joints, and because the panel does not expand or contract with humidity, those joints stay closed instead of opening through the seasons.
Grain sequencing across a run. For wood-grain schemes we can align the grain across adjacent panels so a feature wall or a run of doors reads as continuous timber, which is difficult to achieve with foil-wrapped board where the pattern repeats visibly.
Slim profile with full performance. The panel keeps a visually light edge while remaining 100% aluminum: 0% water absorption, zero formaldehyde, A2 non-combustible and stable from -50 C to 120 C, suitable for hotel corridors, showrooms and high-traffic interiors.
Wall, door and ceiling from one system. The same finish, thickness and edge detail can run across cladding, door leaves and ceiling panels, so an interior scheme stays consistent without switching material or supplier at each element.



FAQ
Q1: How tight are the joints between panels?
A1: Panels are CNC cut so adjacent boards butt in a hairline seam. We supply our current dimensional tolerance specification on request rather than quoting a single figure, because it varies with panel size and finish.
Q2: Will the joints open over time?
A2: No. The all-aluminum construction does not absorb moisture and is dimensionally stable from -50 C to 120 C, so joints do not open and close with seasonal humidity the way timber-based cladding does.
Q3: Can you sequence the wood grain across a wall?
A3: Yes. For wood-grain schemes we can align grain across adjacent panels so a run reads as continuous timber. Please advise the wall layout at the order stage.
Q4: Can the same panel be used for the wall and the door in one room?
A4: Yes. Cladding, door leaves and ceiling panels can all be supplied in the same finish, thickness and edge detail, which is the main reason designers choose this series.
Q5: What fixing systems does it suit?
A5: Panels can be installed with adhesive, clip systems or concealed rail systems depending on the substrate. We supply installation guidance with the order.
Q6: What thickness is standard for wall cladding?
A6: This series runs 14-20 mm with 18 mm standard for wall and door applications. For thinner ceiling and wall panels we also produce a 7-9 mm range.
Q7: Is it suitable for hotel corridors and high-traffic areas?
A7: Yes. The surface resists scuffing and cleaning chemicals, the panel is A2 non-combustible and it does not swell in humid conditions, which suits corridors, lift lobbies and public interiors.
Q8: What is the MOQ?
A8: 500 square meters per colour or finish, with free samples supplied so you can inspect the edge and joint quality first.
Hot Tags: 6mm wood aluminum honeycomb wall panels china-jusen, China 6mm wood aluminum honeycomb wall panels china-jusen manufacturers, suppliers, factory, Honeycomb Mdf Board, Honeycomb Plywood Panel, timber honeycomb panel walnut veneer face, wood honeycomb panel, wood honeycomb panel total 15mm, wood veneer honeycomb panel walnut veneer face






