Factory Custom Hollow-Core Aluminum Laser-Welded Panel
Factory Custom Hollow-Core Aluminum Laser-Welded Panel

Factory Custom Hollow-Core Aluminum Laser-Welded Panel

Our hollow-core dual-finish all-aluminum laser-welded panels are built around an extruded aluminum body that contains a row of rectangular hollow cavities divided by integrated vertical reinforcement ribs. The body is closed by a continuous laser seam along both edges, so the face skin, the cavities and the ribs become one fused aluminum section rather than a stack of layers.
Send Inquiry

Product Name

Hollow-Core Dual-Finish All-Aluminum Laser-Welded Panel

Core Structure

Extruded rectangular hollow multi-cavity aluminum core, continuous laser welded

Internal Reinforcement

Integrated vertical stiffener ribs (alloy 6063-T5)

Face Configuration

Both faces coated in one pass; white face on one side, wood grain face on the other

Joint System

Seamless butt joint with concealed dry-fix clip system, no visible fasteners

Edge Detail

Welded board edge is the finished edge; no edge banding strip and no adhesive line

Wall Thickness

1.0 mm nominal aluminum wall thickness (high rigidity, impact resistant)

Panel Thickness

9 mm / 12 mm / 18 mm / 25 mm options

Width

150 mm / 300 mm / 450 mm / 600 mm / 1220 mm, or cut to your drawing

Length

2400 mm / 3000 mm / 4000 mm standard, cut to order up to 6000 mm

Surface Finishes

Wood grain film, architectural matte coating, brushed aluminum, anti-scratch layer

Colour Range

200+ RAL and Pantone architectural colours, wood grain and solid tones

Fire Performance

Class A2 Non-Combustible (EN 13501-1)

Eco Performance

Zero Formaldehyde (Grade ENF), non-toxic, odourless, 100% recyclable all-aluminum

Moisture & Rot Resistance

100% waterproof, no swelling at cut ends, zero mould growth, termite proof

Load Rigidity

100 kg+ per sqm; stays flat and does not sag

Delamination Risk

100% adhesive-free laser welding; no glue line, no delamination

Custom Service

Drawing review, CNC cutting, grooving, edge folding and colour matching to order

Manufacturing Capacity

20,000 sqm intelligent factory, 12 automated laser-welding lines, 1,500,000 sqm annual capacity

Global Supply & Export

Export to 80+ countries in custom-built seaworthy wooden crates

Minimum Order Quantity

MOQ 500 sqm per colour / finish / specification

Regulatory Certifications

CE · RoHS certified; test report on request

 

Product Overview

 

Our hollow-core dual-finish all-aluminum laser-welded panels are built around an extruded aluminum body that contains a row of rectangular hollow cavities divided by integrated vertical reinforcement ribs. The body is closed by a continuous laser seam along both edges, so the face skin, the cavities and the ribs become one fused aluminum section rather than a stack of layers.

Because both faces of that single welded body are coated in one production pass, one board can carry a smooth matte off-white face on one side and a light warm oak wood-grain face on the other. Cabinet makers, shopfitters and interior fit-out contractors therefore order two specified finishes from one board, one cutting list and one delivery, with no second lamination step, no glue line and no risk of the faces separating. The welded edge is the finished edge, so the cut end is square and bright and needs no edge banding strip.

 

Detailed Description

 

A hollow panel is only convincing when the core and the skin are one piece of metal. On the dual-finish hollow-core all-aluminum laser-welded panel they are. An extruded aluminum body carrying a row of rectangular hollow cavities and integrated vertical reinforcement ribs is closed by a continuous laser seam along both long edges, so the face skin, the cavities and the ribs become a single fused aluminum section with no adhesive interface anywhere in the build. The result is a board that is light in the hand, that sits dead flat across its full length, and that carries none of the delamination risk which follows every glued sandwich panel through its service life.

Because both faces of the same welded body are coated in one production pass, the dual-finish hollow-core all-aluminum laser-welded panel can leave the factory with a smooth matte off-white face on one side and a light warm oak wood-grain face on the other. Cabinet makers, shopfitters and interior fit-out contractors get two specified finishes from a single board, a single cutting list and a single delivery, with no second lamination step, no glue line and no risk of the two faces separating later. The welded edge is the finished edge: the cut end comes out square and bright, with the cavity walls and ribs visible as bare aluminum, so it needs no edge banding strip, no sealing tape and no post-fabrication trim.

The material is fully inorganic, which removes the maintenance problems that engineered wood brings into wet and high-traffic interiors. It is completely waterproof, does not swell at the cut end, does not support mould or termite activity, and wipes clean with a damp cloth after coffee, ink or grease marks. Grade ENF zero-formaldehyde emission means no volatile organic compounds and no odour, so occupied areas can be handed over immediately after installation, while Class A2 non-combustible fire performance under EN 13501-1 provides non-combustible envelope compliance with no flaming droplets and no toxic combustion gases.

Supply depends on production depth and colour control. Every board is welded in house in a 20,000 sqm intelligent manufacturing plant running 12 automated laser-welding lines with an annual capacity of 1,500,000 sqm, and is exported to more than 80 countries worldwide. OEM and ODM support covers drawing review, CNC cutting, grooving, edge folding, private label carton printing, RAL or Pantone colour matching and free samples against a project reference, subject to an accessible MOQ of 500 sqm per colour, finish and specification, seaworthy custom crate packing, and full CE and RoHS international regulatory compliance.

 

Ordering Information

 

• Minimum Order Quantity (MOQ): 500 sqm per colour finish / specification.

• How To Order: send your shop drawing or dimension list; we return a cutting plan, colour sample and quotation for approval before production.

• Face Combination: specify one finish for each face - for example off-white on the visible face and wood grain on the reverse, or wood grain on both faces.

• Thickness Options: 9 mm, 12 mm, 18 mm and 25 mm standard; intermediate sections on request.

• Custom Sizes: widths from 150 mm to 1220 mm and lengths up to 6000 mm, welded first and then cut, grooved or folded to order.

• Colour Selection: over 200 architectural RAL and Pantone finishes, including white, off-white, warm greige, pale blue grey, wood grain and brushed aluminum.

• Installation Hardware: matching concealed clips, starter profiles, internal and external corner trims, joint trims and crown mouldings available.

• Export Packaging: custom-built seaworthy wooden crates sized to the batch, with protective peel-off surface film and corner edge protection.

• International Compliance: CE · RoHS certified; official test reports for Class A2 fire rating, Grade ENF formaldehyde emission and load capacity available upon project request.

 

445-detail-1-main

445-detail-2-specification

445-detail-3-application

 

FAQ

 

Q1: Can one board really carry two different finishes?

A: Yes. Both faces of the same welded aluminum body are coated in one production pass, so a single board can be supplied with a smooth matte off-white face on one side and a light warm oak wood-grain face on the other. Cabinet doors can therefore show a wood grain face to the room and a plain white face to the inside of the carcass, from one board and one cutting list, with no second lamination step and no glue line between the layers.

Q2: How is the hollow core different from a glued sandwich panel?

A: There is no glue anywhere in the build. An extruded aluminum body with rectangular hollow cavities and integrated vertical reinforcement ribs is closed by a continuous laser seam, so the skin, the cavities and the ribs form one fused metal section. Nothing can delaminate because there is no adhesive interface, and the welded edge needs no banding strip, no sealing tape and no post-fabrication trim.

Q3: What edge do I get after the boards are cut to my sizes?

A: A square, clean, bright aluminum edge. The boards are welded first and machined afterwards, so the face, the cavity walls and the ribs are cut together as one body. The cut end shows the open rectangular cavities as bare metal, which is normally left exposed, and can also be grooved or folded to take a concealed dry-fix clip where a flush joint is required.

Q4: How do I get approval on colour and finish before production?

A: Free samples are issued against your RAL or Pantone reference, or against a project sample you send us, so the finish can be checked in the actual lighting of the space. All panels in one order are coated from the same colour batch, and we retain the coating formulation together with your batch reference so a later delivery for the same project can be matched.

Q5: What are the payment terms and quality documentation?

A: We accept T/T, L/C and Trade Assurance terms. Every shipment can be accompanied by CE and RoHS documentation, and official test reports covering the Class A2 fire rating, Grade ENF formaldehyde emission and load capacity are available on request for your project file. A test report is also available for any other performance data your specification requires.

Hot Tags: factory custom hollow-core aluminum laser-welded panel, China factory custom hollow-core aluminum laser-welded panel manufacturers, suppliers, factory, aluminium solid panel, aluminum panel custom cut size, Aluminum Solid Panel, Aluminum Substrate, Solid Aluminum Panel, Solid Aluminum Plate