Wood Grain Metal All-Aluminum Laser-Welded Panel
Wood Grain Metal All-Aluminum Laser-Welded Panel

Wood Grain Metal All-Aluminum Laser-Welded Panel

Our wood grain all-aluminum laser-welded panels pair a real wood grain appearance with an extruded aluminum body that contains a row of rectangular hollow cavities divided by integrated vertical reinforcement ribs. The body is closed by a continuous laser seam along both edges, so the grain film, the metal skin, the cavities and the ribs become one fused aluminum section rather than a stack of layers.
Send Inquiry

Product Name

Wood Grain All-Aluminum Laser-Welded Panel

Core Structure

Extruded rectangular hollow multi-cavity aluminum core, continuous laser welded

Face Structure

Wood grain decorative film bonded to a welded aluminum skin; no wood-based layer

Internal Reinforcement

Integrated vertical stiffener ribs (alloy 6063-T5)

Joint System

Seamless butt joint with concealed dry-fix clip system, no visible fasteners

Edge Detail

Welded board edge is the finished edge; no edge banding strip and no adhesive line

Wood Grain Range

20+ grain options: dark walnut, silver grey oak, warm red-brown, cream oak, teak, pale ash

Panel Thickness

9 mm / 12 mm / 18 mm / 25 mm options

Width

150 mm / 300 mm / 450 mm / 600 mm / 1220 mm, or cut to your drawing

Length

2400 mm / 3000 mm / 4000 mm standard, cut to order up to 6000 mm

Surface Finishes

Wood grain film, architectural matte coating, brushed aluminum, anti-scratch layer

Colour Range

200+ RAL and Pantone architectural colours, wood grain and solid tones

Fire Performance

Class A2 Non-Combustible (EN 13501-1)

Eco Performance

Zero Formaldehyde (Grade ENF), non-toxic, odourless, 100% recyclable all-aluminum

Moisture & Pest Resistance

100% waterproof, no swelling at cut ends, termite proof, mould resistant

Cleaning & Maintenance

Damp cloth wipe; no polishing, oiling or re-sealing required

Load Rigidity

100 kg+ per sqm; stays flat and does not sag

Delamination Risk

100% adhesive-free laser welding; no glue line and no wood-based core to delaminate

Custom Service

Drawing review, CNC cutting, grooving, edge folding and grain matching to order

Manufacturing Capacity

20,000 sqm intelligent factory, 12 automated laser-welding lines, 1,500,000 sqm annual capacity

Global Supply & Export

Export to 80+ countries in custom-built seaworthy wooden crates

Minimum Order Quantity

MOQ 500 sqm per grain / finish / specification

Regulatory Certifications

CE · RoHS certified; test report on request

 

Product Overview

 

Our wood grain all-aluminum laser-welded panels pair a real wood grain appearance with an extruded aluminum body that contains a row of rectangular hollow cavities divided by integrated vertical reinforcement ribs. The body is closed by a continuous laser seam along both edges, so the grain film, the metal skin, the cavities and the ribs become one fused aluminum section rather than a stack of layers.

Twenty or more wood grain options are available, from dark walnut and silver grey oak through warm red-brown and cream oak to teak and pale ash. Because the grain is a decorative film over welded aluminum rather than a veneer over a wood-based board, every machined edge stays bright and bare, no edge banding strip is needed, and the panel can be specified for bathrooms, laundries and other wet service areas where timber-faced board is not an option.

 

Detailed Description

 

A wood grain surface is only worth specifying when what sits behind it survives the same punishment as the face. On the wood grain all-aluminum laser-welded panel it does. The grain is a decorative film bonded to a welded aluminum skin, and behind that skin sits nothing but an extruded aluminum body: a row of rectangular hollow cavities divided by integrated vertical reinforcement ribs, closed by a continuous laser seam along both edges. There is no MDF layer, no HPL sheet, no particleboard core and no glue line, so there is no wood-based material inside the board to take on moisture, no binder to break down and no layer that can separate from another.

That construction changes what happens at every cut. When a cabinet maker machines the board to a cutting list, the saw passes through the grain film, the metal skin, the cavity walls and the ribs together, and the resulting edge is square, bright bare aluminum with the hollow sections exposed. Nothing is left open to water, nothing needs an edge banding strip, and nothing has to be sealed on site. The board is completely waterproof, does not swell at the cut end, and keeps its flatness across the full length of the panel even in bathrooms, laundries and other wet service areas.

Indoors, the wood grain all-aluminum laser-welded panel removes the problems that follow wood-based boards through a building's life. There is no formaldehyde binder, so the panel is rated Grade ENF zero formaldehyde emission, gives off no odour and allows occupied spaces to be handed over immediately after installation. It is termite proof and does not support mould, and a damp cloth removes coffee, ink and grease marks without polish or oil. Class A2 non-combustible performance under EN 13501-1 covers non-combustible envelope requirements, while the wood grain face delivers the warmth of timber without its maintenance burden.

Supply is built around colour control and production depth. Twenty or more wood grain options are held, including dark walnut, silver grey oak, warm red-brown, cream oak, teak and pale ash, matched against RAL, Pantone or NCS references and issued as free samples for approval before bulk production. All boards are coated, welded and inspected in house in a 20,000 sqm intelligent manufacturing plant running 12 automated laser-welding lines with an annual capacity of 1,500,000 sqm, and shipped to more than 80 countries in custom seaworthy crates, under an accessible MOQ of 500 sqm per grain, finish and specification, with full CE and RoHS compliance and test reports on request.

 

Ordering Information

 

• Minimum Order Quantity (MOQ): 500 sqm per grain / finish / specification.

• How To Order: send your shop drawing or dimension list; we return a cutting plan, wood grain sample and quotation for approval before production.

• Grain Selection: choose from 20+ held grains or send a reference surface for matching; free samples are issued against your RAL, Pantone or NCS reference.

• Thickness Options: 9 mm, 12 mm, 18 mm and 25 mm standard; intermediate sections on request.

• Custom Sizes: widths from 150 mm to 1220 mm and lengths up to 6000 mm, welded first and then cut, grooved or folded to order.

• Colour Selection: over 200 architectural RAL and Pantone finishes, including grain, solid and brushed aluminum surfaces.

• Installation Hardware: matching concealed clips, starter profiles, internal and external corner trims, joint trims and crown mouldings available.

• Export Packaging: custom-built seaworthy wooden crates sized to the batch, with protective peel-off surface film and corner edge protection.

• International Compliance: CE · RoHS certified; official test reports for Class A2 fire rating, Grade ENF formaldehyde emission and load capacity available upon project request.

 

446-detail-1-main

446-detail-2-specification

446-detail-3-application

 

FAQ

Q1: Is the wood grain face real wood or a film?

A: It is a decorative wood grain film bonded to a welded aluminum skin, not a wood veneer and not a laminate over a wood-based board. Behind the film and the skin there is only an extruded aluminum body with rectangular hollow cavities and integrated vertical reinforcement ribs, so the panel has no MDF layer, no HPL sheet, no particleboard core and no glue line anywhere in its build.

Q2: What happens at the cut edge when the boards are machined?

A: The saw passes through the grain film, the metal skin, the cavity walls and the ribs together, so the finished edge is square and bright bare aluminum with the hollow sections exposed. Nothing is left open to water, no edge banding strip is required, and nothing needs to be sealed on site. The panel is completely waterproof and does not swell at the cut end, which is why it can be specified for bathrooms, laundries and other wet service areas.

Q3: How do I approve the grain and colour before bulk production?

A: Free samples are issued against your RAL, Pantone or NCS reference, or against a reference surface you send us, so the grain can be checked in the actual lighting of the space. All panels in one order are coated from the same grain batch, and we retain the film formulation together with your batch reference so a later delivery for the same project can be matched.

Q4: Can the panel be used where solid wood or laminate would normally be specified?

A: Yes, and it is usually the better choice in those positions. Grade ENF zero formaldehyde emission means no binder and no odour, so occupied areas can be handed over immediately. The panel is termite proof and does not support mould, a damp cloth removes coffee, ink and grease marks without polish or oil, and Class A2 non-combustible performance under EN 13501-1 satisfies non-combustible envelope requirements that timber-based boards cannot meet.

Q5: What are the payment terms and quality documentation?

A: We accept T/T, L/C and Trade Assurance terms. Every shipment can be accompanied by CE and RoHS documentation, and official test reports covering the Class A2 fire rating, Grade ENF formaldehyde emission and load capacity are available on request for your project file. A test report is also available for any other performance data your specification requires.

Hot Tags: wood grain metal all-aluminum laser-welded panel, China wood grain metal all-aluminum laser-welded panel manufacturers, suppliers, factory, aluminium solid panel, aluminum panel custom cut size, Aluminum Solid Panel, Aluminum Substrate, Solid Aluminum Panel, Solid Aluminum Plate