Polypropylene Honeycomb Core Material
Polypropylene Honeycomb Core Material

Polypropylene Honeycomb Core Material

Material: Polypropylene (PP) — virgin, recycled, or glass-fiber reinforced grades
Cell Shape: Hexagonal (standard, best strength-to-weight), circular, rectangular
Cell Size (Diameter): 6 mm, 8 mm, 10 mm, 12 mm, 15 mm, 20 mm
Core Thickness Range: 3 mm to 200 mm
Common Thicknesses: 8, 10, 12, 15, 20, 25, 30, 40, 50 mm
Density Range: 40, 60, 80, 100, 120, 150, 200 kg/m³
Standard Sheet Size: 1220×2440 mm, 1500×3000 mm, 1220×3000 mm (custom sizes available)
Send Inquiry

Product Overview

 

The PP Honeycomb Core is a lightweight, thermoplastic honeycomb structure manufactured from extruded polypropylene (PP) tubes that are thermally bonded together into a continuous hexagonal or circular cell matrix. PP honeycomb cores offer outstanding impact resistance, 100% waterproof performance, excellent chemical inertness, and full recyclability - all at a cost that is 40–60% lower than aluminum honeycomb and 70–80% lower than aramid (Nomex) honeycomb. Available in densities from 40 to 200 kg/m³, cell sizes from 6 to 20 mm, and thicknesses from 3 to 200 mm, PP honeycomb is the versatile, cost-effective core material for lightweight composite sandwich panels used in automotive interiors, truck and trailer bodies, RV sidewalls, marine decking, wind turbine components, cleanroom panels, reusable packaging, and industrial applications. It is compatible with a wide range of facing materials - aluminum, FRP/fiberglass, plywood, and thermoplastic sheets - bonded with epoxy, polyurethane, or hot-melt adhesive systems. Standard and fire-retardant (UL94 V-0, FAR 25.853) grades are available, along with glass-fiber reinforced, anti-static, and UV-stabilized variants.

 

Key Features & Advantages

 

  • Cost-Effective: 40–60% less expensive than aluminum honeycomb and 70–80% less than aramid (Nomex) honeycomb per square meter. The most economical structural honeycomb core material for industrial and transportation applications.
  • 100% Waterproof & Moisture-Proof: Polypropylene absorbs virtually zero water (<0.01% after 24h immersion). No swelling, no rotting, no mold growth. Ideal for marine, outdoor, and wet-area applications where paper honeycomb and wood cores fail.
  • Impact-Resistant & Tough: PP is a ductile thermoplastic with excellent impact energy absorption. Unlike brittle foam cores (PVC, PET, SAN), PP honeycomb compresses and rebounds without permanent damage. Absorbs cargo impact, hail, and rough handling.
  • Chemical Resistant: PP resists most acids, alkalis, solvents, and oils at room temperature. Suitable for chemical processing environments, laboratory panels, and industrial applications.
  • Ultra-Lightweight: At 40–200 kg/m³ density, a 15 mm/80 kg/m³ PP core weighs only 1.2 kg/m² - 60% lighter than plywood and 50% lighter than aluminum honeycomb of equivalent thickness.
  • Acoustic & Thermal Insulation: The closed-cell structure provides sound absorption (especially with perforated facings) and thermal insulation (thermal conductivity ~0.04–0.06 W/m·K). Air pockets in the cells act as an insulative barrier.
  • 100% Recyclable: PP is fully recyclable (resin code #5). Sandwich panels with PP core and PP facings are mono-material and can be recycled together. Zero formaldehyde, zero VOCs. Supports circular economy and green building goals.
  • Easy to Process: Cut with a utility knife (thin sheets), circular saw, bandsaw, CNC router, waterjet, or die-cutter. No special tools needed. Clean cutting - no hazardous dust (unlike aramid or carbon fiber). No skin irritation.
  • Good Fatigue Resistance: Withstands repeated dynamic loading without performance degradation - important for automotive floor panels, trailer floors, and bridge decks that experience millions of load cycles.
  • Flexible - Conforms to Curves: PP honeycomb has directional flexibility perpendicular to the cell axis, allowing it to conform to moderate single-curvature surfaces in panel lamination without crushing the cells.
  • Fire-Retardant Grade Available: Halogen-free intumescent FR-PP meets UL94 V-0, FAR 25.853 (12-second vertical burn), DIN 5510, and EN 45545-2. For aerospace, rail, and public building applications requiring strict fire certification.
  • Wide Range of Variants: Virgin PP (standard), recycled PP (rPP, cost-effective), glass-fiber reinforced PP (PP-GF, higher stiffness), anti-static/conductive PP (ESD protection), UV-stabilized PP (outdoor applications).

 

Technical Specifications

 

Parameter

Specification

Material

Polypropylene (PP) - virgin, recycled, or glass-fiber reinforced grades<br/>

Cell Shape

Hexagonal (standard, best strength-to-weight), circular, rectangular<br/>

Cell Size (Diameter)

6 mm, 8 mm, 10 mm, 12 mm, 15 mm, 20 mm<br/>

Core Thickness Range

3 mm to 200 mm<br/>

Common Thicknesses

8, 10, 12, 15, 20, 25, 30, 40, 50 mm<br/>

Density Range

40, 60, 80, 100, 120, 150, 200 kg/m³<br/>

Standard Sheet Size

1220×2440 mm, 1500×3000 mm, 1220×3000 mm (custom sizes available)

Weight (15 mm / 80 kg/m³)

Approx. 1.2 kg/m²

Temperature Resistance

Continuous: -30°C to +80°C; short-term peak: +100°C

Water Absorption

<0.01% (24h immersion)

Thermal Conductivity

Approx. 0.04–0.06 W/m·K

Color

White, black, grey, natural (translucent white)

Surface Options

Untreated (adhesive bonding), non-woven polyester veil (improved adhesive wet-out), corona/plasma treated (enhanced surface energy)

Fire-Retardant Grade

FR-PP: UL94 V-0, FAR 25.853, DIN 5510 (S4/SR2/ST2), EN 45545-2 (HL1/HL2), GB 8624 Class B1

Special Grades

Glass-fiber reinforced (PP-GF, +20–30% stiffness), anti-static/conductive (carbon-filled, ESD protection), UV-stabilized (outdoor use), recycled (rPP, cost-effective)

Facing Compatibility

Aluminum, FRP/fiberglass (polyester/vinyl ester/epoxy), plywood, PP sheet, ABS sheet, HPL

Bonding Methods

Epoxy or PU adhesive film lamination (hot press), liquid adhesive (roller/spray + cold press), hot-melt film (continuous lamination), vacuum bagging (curved panels)

 

Typical Applications

 

· Automotive interiors: headliners, door panels, trunk floors, parcel shelves, load floors

· Truck & trailer bodies: sidewalls, roofs, floors, partitions - 40–60% weight reduction vs. plywood

· RV & caravan manufacturing: sidewalls, roof, floor, furniture panels

· Marine & boat building: deck panels, bulkheads, cabinetry, hatches - 100% waterproof

· Wind energy: nacelle covers, spinner cones, blade shear webs

· Construction: lightweight partition walls, door cores, false ceilings, concrete formwork

· Furniture: lightweight tabletops, cabinet doors, shelving - replacing MDF/particleboard

· Packaging & logistics: reusable transport pallets, crates, protective packaging - washable, durable

· Sports & leisure: paddle boards (SUP), kayaks, ski cores, sports flooring underlay

· Aerospace interiors (secondary): galley panels, luggage bins, cabin partitions (FR grade)

· Industrial: cleanroom panels, machine covers, acoustic enclosures, filtration media support

product-1024-1024
product-1024-1024
product-1024-1024
product-1024-1024

 

Processing & Packaging

 

PP honeycomb core sheets are stacked flat on pallets, separated by thin PE film interlayers to prevent surface marring. Corner protectors applied. Stacks are wrapped in heavy-duty stretch film and secured with polyester strapping. For export, pallets are enclosed in corrugated cardboard or plywood crates. Domestic: dedicated logistics, door-to-door. International: FCL sea freight (PP honeycomb is bulky due to low density - a 40HQ container holds approximately 3,000–4,000 m² at 15 mm thickness). FOB/CIF terms. Store flat in a dry environment away from direct sunlight and heat sources. MOQ: 200–500 m² for standard specifications; custom formulations 500–1,000 m². Sample sheets (A4 or 300×300 mm) available. Lead time: 3–7 working days (stock); 10–15 working days (custom thickness); 15–25 working days (FR grade or special formulations).

 

Customization & Inquiry

 

We welcome inquiries for custom cell sizes, densities, thicknesses, and special formulations (FR, PP-GF, anti-static, UV-stabilized). Please provide your panel construction details (facing materials, adhesive system, pressing method) so our technical team can recommend the optimal core specification. Technical datasheets with compressive strength, shear strength, and shear modulus values for each density and cell size are available.

 

PP Honeycomb Core FAQ

 

Q: 1. What is a PP honeycomb core?

A: A PP (polypropylene) honeycomb core is a lightweight, thermoplastic honeycomb structure manufactured from extruded polypropylene tubes that are thermally bonded together to form a continuous hexagonal or circular cell matrix. PP honeycomb cores offer excellent impact resistance, moisture immunity, chemical inertness, and recyclability at a lower cost than aluminum or aramid (Nomex) honeycombs. They are widely used as the core material in lightweight composite sandwich panels for automotive interiors, transportation, construction, furniture, packaging, and renewable energy applications. PP honeycomb cores are typically supplied in flat sheets or continuous rolls and are compatible with a range of facing materials including aluminum, FRP (fiberglass), plywood, and thermoplastic sheets bonded with polyurethane, epoxy, or hot-melt adhesives.

Q: 2. What are the standard specifications?

A: Common specifications:
· Cell shape: hexagonal, circular, or rectangular (hexagonal is standard, offering the best strength-to-weight ratio)
· Cell size (diameter): 6mm, 8mm, 10mm, 12mm, 15mm, 20mm
· Core thickness: 3mm to 200mm (common range: 8mm, 10mm, 12mm, 15mm, 20mm, 25mm, 30mm, 40mm, 50mm)
· Density: 40, 60, 80, 100, 120, 150, 200 kg/m³
· Standard sheet size: 1220×2440mm, 1500×3000mm, 1220×3000mm (custom sizes available)
· Weight: a 15mm core at 80 kg/m³ weighs approximately 1.2 kg/m²
· Material: virgin PP (standard), recycled PP (cost-effective), or PP with glass-fiber reinforcement (higher stiffness)
· Color: white, black, grey, natural (translucent white)
· Temperature resistance: continuous -30°C to +80°C; short-term up to +100°C
· Surface: untreated (for adhesive bonding) or with non-woven polyester veil for improved adhesive wetting
· Fire retardant: standard PP is combustible; FR-grade with halogen-free fire retardant available (meets UL94 V-0, FAR 25.853)

Q: 3. What is the minimum order quantity (MOQ)?

A: The typical MOQ is 200–500 square meters for standard cell sizes, densities, and thicknesses. For custom specifications (non-standard cell size, density, or FR-grade formulations), the MOQ may be 500–1,000 m² due to production line setup requirements. Sample sheets (A4 or 300×300mm) are available for evaluation. Please specify your core thickness, density, cell size, and facing material plan for a quotation.

Q: 4. Where are PP honeycomb cores used?

A: Common applications:
· Automotive interiors: headliners, door panels, trunk floors, parcel shelves, load floors - lightweight and impact-absorbing
· Commercial vehicles and RVs: sidewall panels, roof panels, floor panels, partition walls - replacing plywood to reduce weight by 40–60%
· Marine and boat building: deck panels, bulkheads, cabinetry, hatches - 100% waterproof, no rot
· Wind energy: nacelle covers, spinner nose cones, blade shear webs - lightweight structural core for composite laminates
· Construction and building: lightweight partition walls, door cores, false ceiling panels, concrete formwork panels
· Furniture: lightweight table tops, cabinet doors, shelving - replacing MDF/particleboard for weight reduction
· Packaging and logistics: reusable transport pallets, crates, protective packaging - high strength-to-weight, washable, durable
· Sports and leisure: paddle boards (SUP), kayaks, ski cores, sports flooring underlay
· Aerospace interiors (secondary structures): galley panels, luggage bins, cabin partitions (with FR-grade)
· Industrial: cleanroom panels, machine covers, acoustic enclosures, filtration media support

Q: 5. What are the advantages of PP honeycomb cores over other core materials?

A: ① Cost-effective: PP honeycomb is 40–60% less expensive than aluminum honeycomb and 70–80% less than aramid (Nomex) honeycomb per square meter at equivalent thickness.
② 100% waterproof and moisture-proof: polypropylene absorbs virtually zero water (<0.01% after 24h immersion). Unlike paper honeycomb or wood-based cores, PP will never swell, rot, or support mold growth - ideal for marine, outdoor, and wet-area applications.
③ Impact-resistant and tough: PP is a ductile thermoplastic with excellent impact energy absorption. Unlike brittle foam cores (PVC, PET, SAN), PP honeycomb compresses and rebounds without permanent damage or crumbling.
④ Chemical resistant: PP resists most acids, alkalis, solvents, and oils at room temperature - suitable for chemical processing environments and laboratory furniture.
⑤ Lightweight: at 40–200 kg/m³ density, PP honeycomb is among the lightest structural core materials. A 15mm/80 kg/m³ core weighs 1.2 kg/m² - 60% lighter than plywood and 50% lighter than aluminum honeycomb.
⑥ Excellent acoustic and thermal insulation: the closed-cell structure provides sound absorption (especially with perforated facings) and thermal insulation (thermal conductivity ~0.04–0.06 W/m·K).
⑦ Recyclable and eco-friendly: PP is 100% recyclable (resin code #5). Sandwich panels with PP core and PP facings are mono-material and can be recycled together. No formaldehyde, no VOCs.
⑧ Easy to process: PP honeycomb can be cut with a utility knife (thin sheets), circular saw, bandsaw, CNC router, waterjet, or die-cutter. No special tools needed. Clean cutting - no hazardous dust (unlike aramid or carbon fiber).
⑨ Good fatigue resistance: PP honeycomb withstands repeated dynamic loading without performance degradation - important for automotive and transport floor panels.
⑩ Flexible resilience: PP honeycomb has directional flexibility perpendicular to the cell axis, allowing it to conform to moderate single-curvature surfaces without crushing.

Q: 6. What types of PP honeycomb cores are available?

A: By cell geometry:
· Hexagonal (standard): best strength-to-weight ratio, most common, available in 6–20mm cell sizes
· Circular: smooth cell walls, slightly lower density options, good for vacuum forming
· Rectangular / square: directional strength, used for specific load cases
By material grade:
· Virgin PP: standard quality, consistent mechanical properties - recommended for structural applications
· Recycled PP (rPP): cost-effective, slightly lower mechanical properties - suitable for non-structural and packaging applications
· Glass-fiber reinforced PP (PP-GF): 20–30% higher compressive and shear strength, improved heat resistance - for automotive and high-performance applications
· Fire-retardant PP (FR-PP): halogen-free intumescent FR formulation. Meets UL94 V-0, FAR 25.853 (12-second vertical burn), and DIN 5510. For aerospace, rail, and public building applications.
· Conductive / anti-static PP: carbon-filled for ESD protection - for electronics packaging and cleanroom applications
· UV-stabilized PP: for outdoor applications with prolonged sun exposure
By surface treatment:
· Standard (untreated): suitable for contact adhesives and mechanical bonding
· Non-woven polyester veil (surface mat): improves adhesive wet-out and bond strength with epoxy, PU, and other liquid adhesives
· Corona / plasma treated: enhanced surface energy for improved adhesive bonding

Q: 7. Is PP honeycomb core fire-resistant?

A: Standard PP honeycomb is combustible (UL94 HB rating) and is suitable for applications without strict fire requirements. For applications requiring fire resistance, we offer:
· Fire-retardant PP honeycomb (FR-PP): halogen-free, intumescent formulation that meets:
- UL94 V-0 (self-extinguishing within 10 seconds)
- FAR 25.853 (a) Appendix F Part I (a)(1)(i) - 12-second vertical burn test for aircraft interiors
- DIN 5510 (S4/SR2/ST2) - German rail vehicle standard
- EN 45545-2 (HL1/HL2) - European rail fire safety
- GB 8624 Class B1 (flame-retardant) for building materials
Note: the overall fire rating of the finished sandwich panel depends on both the core and the facing materials. For Class A applications, pair FR-PP core with non-combustible facings (aluminum, steel) and verify the assembly through fire testing.

Q: 8. What is the typical production lead time?

A: · Standard specifications in stock: 3–7 working days
· Standard cell/density with custom thickness: 10–15 working days
· FR-grade or special formulations: 15–25 working days
· Custom cell size or large project orders: timeline confirmed case-by-case
Production capacity is approximately 3,000–5,000 m² per day for standard cores. We stock popular specifications (80 kg/m³, 8mm cell, 10–25mm thickness) for immediate shipment. For custom orders, factor in raw material procurement and production line setup time.

Q: 9. How is PP honeycomb core packaged and shipped?

A: Packaging: PP honeycomb core sheets are stacked flat on pallets, separated by thin PE film interlayers to prevent surface marring. Corner protectors are applied. Stacks are wrapped in heavy-duty stretch film and secured with polyester strapping. For export, pallets are enclosed in corrugated cardboard or plywood crates.
Shipping:
· Domestic: dedicated logistics, door-to-door
· International: FCL sea freight preferred (PP honeycomb is bulky due to low density - a 40HQ container holds approximately 3,000–4,000 m² at 15mm thickness). FOB/CIF terms.
Handling: PP honeycomb is lightweight and can be handled manually. Avoid dragging sheets across rough surfaces; lift and place. Store flat in a dry environment away from direct sunlight and heat sources.

Q: 10. How is PP honeycomb core processed into sandwich panels?

A: Panel production methods:
① Adhesive film lamination: place thermosetting epoxy or polyurethane adhesive film between the PP core and facing skins; hot-press at 100–150°C, 0.1–0.5 MPa for 10–30 minutes. Best bond strength; suitable for aluminum, FRP, and plywood facings.
② Liquid adhesive bonding: apply two-part PU, epoxy, or MS polymer adhesive to the core surface with a roller coater or spray; lay up facings; press at room temperature or with moderate heat. Faster setup, no heat press required.
③ Hot-melt lamination: polyolefin-based hot-melt film between thermoplastic facings and PP core; continuous roll-to-roll or press lamination at 130–160°C. Compatible with PP facings for 100% recyclable mono-material panels.
④ Vacuum bagging: for curved or shaped panels - lay up adhesive and facings in a vacuum bag; apply vacuum (-0.8 bar) at room or elevated temperature.
Processing tips:
· Cutting: circular saw (fine-tooth carbide blade), bandsaw, CNC router, waterjet, or oscillating knife cutter. Cut at room temperature - avoid generating heat that melts the PP.
· Edge finishing: apply edge sealant (PU or epoxy) or edge profile to protect core edges and prevent moisture ingress (though PP is waterproof, exposed core edges can collect dirt).
· Drilling and fastening: use threaded inserts or rivet nuts for mechanical fasteners. Pre-drill with a slightly undersized bit. Through-bolts with large washers distribute load.
· Thermoforming: PP honeycomb can be thermoformed with thermoplastic facings for 3D shapes - heat to 150–170°C, form in a matched mold, and cool under pressure.
We provide detailed lamination guides, adhesive recommendations, and technical support for panel manufacturers.

Hot Tags: polypropylene honeycomb core material, China polypropylene honeycomb core material manufacturers, suppliers, factory, Plastic Honeycomb Core, plastic honeycomb core density 120 kg m3, Polypropylene Honeycomb, PP Honeycomb, PP Honeycomb Core, PP sandwich core PP copolymer