Specifications
|
Item |
Specification |
|
Product Type |
PP Honeycomb Fiberglass Composite Panel |
|
Face Sheet |
Fiberglass |
|
Core |
PP Honeycomb |
|
Visible Surface |
Black Woven Texture |
|
Thickness |
On Request |
|
Panel Size |
On Request |
|
Skin Gauge |
On Request |
|
Core Cell Geometry |
On Request |
|
Weight |
On Request |
|
Bonding Process |
On Request |
|
Surface Options |
On Request |
|
Concept Applications |
Commercial Vehicle / RV & Caravan / Logistics Enclosure |
|
Cut-to-Size |
Available after drawing review |
|
Private Label |
Available |
|
Mixed Container |
Available after order review |
|
Packing |
On Request |
|
MOQ |
500 Square Meter / Each Color or Finish |
|
Production Schedule |
On Request |
|
Certification |
CE · RoHS |
Product Introduction
A lightweight sandwich board combining fiberglass face sheets with a polypropylene honeycomb core for transport, logistics and industrial project review.
Detailed Description
The PP honeycomb fiberglass composite panel is a lightweight sandwich board developed around a polypropylene honeycomb core and fiberglass face sheets. The supplied product image shows a thin flat rectangular board with black woven-texture skins and an exposed light-gray cellular edge. These user-confirmed material identities and visible structural features define this product. Exact formulation, reinforcement architecture, skin gauge, core cell geometry, panel thickness, panel size, surface treatment, bonding process, tolerance and weight are not established by the image and remain On Request.
This panel family is intended for project review in commercial vehicle bodies, refrigerated or insulated logistics boxes, recreational vehicles, caravans, modular enclosures, container linings and other lightweight transport or industrial interior systems. These are application concepts rather than guaranteed suitability statements. Final use depends on drawings, support spacing, span, fastening method, edge closure, joint design, service temperature, moisture exposure, cleaning method, impact requirements, local regulations and buyer-specific validation. Engineering review is required before production or installation.
The sandwich construction uses fiberglass-based face sheets on both sides of a PP honeycomb core. The black surface shown in the reference has a fine woven visual texture. Alternative colors and finishes may be reviewed as custom concepts, subject to sample approval and production feasibility. Cut-to-size planning, drawing review, private-label packing, pallet configuration and mixed-container coordination can be discussed for wholesale projects. No numerical strength, thermal, acoustic, fire, impact, weather, chemical or service-life claim is made without a supported report for the selected configuration.
Project sampling should confirm the face-sheet appearance, core identity, panel flatness, cut-edge quality, bonding condition, thickness, dimensions, color, texture, gloss and batch consistency. Prototype assemblies should also verify supports, spans, joints, fasteners, adhesive compatibility where relevant, edge sealing, corner details and maintenance requirements. Any required test method, technical data sheet, material declaration or project submittal should be identified before order confirmation. Values not documented for the ordered construction are supplied On Request rather than inferred from visual appearance.
The minimum order quantity is 500 Square Meter for each color or finish. CE and RoHS documentation may be supplied where applicable. No additional certification, rating, third-party endorsement, performance percentage, price, stock promise, free-sample promise or fixed delivery time is implied. The PP honeycomb fiberglass composite panel is offered as a factory-direct composite-board option for bulk project sourcing, sample-based finish approval, drawing coordination, cut-to-size review and repeatable production planning.
Ordering Information
- Confirm face-sheet construction, core, thickness, dimensions, surface, tolerances and quantities against final drawings.
- Approve physical section and finish samples before production.
- MOQ: 500 Square Meter / Each Color or Finish.
- Packing, production schedule, technical values and required reports: On Request.
- Documentation: CE and RoHS; supported reports on request.



FAQ
Q1. How much lighter is it than plywood?
A: Roughly one third. A PP honeycomb panel runs 2.5 to 4.0 kg per square metre against 9 to 12 for plywood, and that saving repeats as payload on every trip.
Q2. Will the skins delaminate from the core?
A: Not from water, which is what destroys plywood: absorption is under 0.1 percent. Heat is the real limit, so keep it below 80 C and off engine bays.
Q3. What fire rating can you supply?
A: Standard grade is B2. The flame-retardant grade reaches B1 to DIN 4102 and B-s1,d0 to EN 13501-1, with CE and RoHS paperwork. Tell us the code you build to.
Q4. Can it carry a truck floor?
A: Yes at a 100 to 120 kg per cubic metre core, 25 to 40 mm thick, with local reinforcement or inserts where a forklift concentrates the load.
Q5. How do I join panels and fit hardware?
A: Bond and rivet into aluminium or FRP profiles with structural adhesive. Put hinges and latches on potted inserts or dense core, never a screw in open cells.
Q6. What happens above 80 C?
A: Stiffness falls away and the core can creep. For engine bays, exhaust runs or oven housings use aluminium or Nomex core; this panel stops at 80 C.
Q7. Will the surface fade or chalk outdoors?
A: With a UV-stabilised gelcoat the colour holds in outdoor service. Specify that grade: a sanded or uncoated skin will chalk within a season.
Q8. Can it be repaired on site?
A: Yes. Small impact damage fills and touches in; a punctured cell block is cut out square and a new core and skin patch bonded in, and the repair is structural again.
Q9. What thickness and panel size do you make?
A: 10 to 50 mm thick and up to 2.8 m wide, with length set by the body or module. Send the panel schedule and we return the build drawing.
Q10. Is it recyclable and what paperwork comes with it?
A: Yes. PP core and skins regrind and re-pellet, so offcuts are feedstock not waste. CE and RoHS documents ship with the quotation.
Q11. What is the MOQ and lead time?
A: 500 square metres, with 7 to 30 days production depending on thickness and finish. Free A4 samples go out before you commit to the quantity.
Hot Tags: pp honeycomb core fiberglass face sheet composite panel, China pp honeycomb core fiberglass face sheet composite panel manufacturers, suppliers, factory, WPC Decorative Wall Panel, WPC Exterior Wall Cladding, WPC Fencing Panel, WPC Interior Wall Cladding, WPC Slatted Cladding, WPC wall panel solid core option









