Specifications
|
Item |
Specification |
|
Product Type |
Integrated Hollow Fluted Wall Panel |
|
Visible Structure |
Wide Hollow Ribs / Open Cavities / Continuous Backing Web / Side Joining Profile |
|
Visible Finishes |
Light Natural Wood / Pale Blue / Dark Brown Wood |
|
Source-Listed Material |
Bamboo-Fiber Decorative Panel - Technical Confirmation Required |
|
Source Waterproof Claims |
Not Independently Verified; Supporting Data Required |
|
Material Formulation |
On Request |
|
Surface Film Construction |
On Request |
|
Panel Width |
On Request |
|
Panel Thickness |
On Request |
|
Panel Length |
On Request |
|
Rib Spacing |
On Request |
|
Installation System |
On Request |
|
Application |
Commercial Interior / Reception Wall / Retail Showroom / Interior Accent Wall |
|
Custom Size |
Available after drawing and order review |
|
Private Label |
Available |
|
Sample Approval |
Available |
|
Mixed Container |
Available after order review |
|
Packing |
On Request |
|
MOQ |
500 Square Meter / Each Color or Finish |
|
Production Schedule |
On Request |
|
Certification |
CE · RoHS |
Product Introduction
A three-finish decorative profile family with wide raised hollow ribs, open cut-end cavities, a continuous backing web, and a side joining profile for interior architectural wall projects.
Detailed Description
The integrated hollow fluted wall panel collection is prepared for distributors, contractors, interior-fit-out companies, commercial project buyers, and wholesale customers who need a consistent linear decorative surface. The supplied reference shows a family of profiles in light natural wood grain, pale blue solid finish, and dark brown wood grain. Visible identity is defined by repeated wide raised rectangular ribs, open rectangular cavities at the cut ends, recessed longitudinal channels, a continuous backing web, and a side joining profile. These visible characteristics are treated as the product identity anchor. They are not independent proof of hidden formulation, dimensions, installation method, or performance.
The source image describes the item as a bamboo-fiber decorative panel and includes Chinese marketing statements concerning a waterproof substrate, a waterproof PVC surface film, and resistance to deformation after prolonged soaking. In this document, those statements remain source-listed marketing claims that require technical confirmation. They must not be used as verified waterproof, moisture-resistance, soaking, durability, or material-composition claims in a product listing, drawing, contract, project submittal, or acceptance document until supporting technical data is supplied. Exact material formulation, film construction, density, panel width, thickness, length, rib spacing, wall thickness, fastening method, accessories, packing, and production schedule remain On Request.
Project preparation should begin with an approved physical profile sample, an approved finish sample, and confirmed installation information. Sample review should verify the wide-rib rhythm, cavity shape, backing-web appearance, joining profile, grain direction, gloss, exposed cut-end quality, color response under the intended lighting, and compatibility with the proposed substrate and edge treatment. The source-visible finishes may support interior feature-wall concepts for reception areas, retail showrooms, meeting rooms, hospitality interiors, and other decorative commercial spaces. Exterior use, wet-area use, and weathering exposure are not confirmed by the reference and require separate technical review.
Factory coordination can cover drawing review, cut-to-size review, finish matching, sample approval, batch comparison, private-label packing, carton marking, pallet planning, and mixed-container support. The minimum order quantity is 500 Square Meter for each color or finish. CE and RoHS documentation may be supplied where applicable. Any other material report, performance report, test method, warranty, rating, or project document is available only when supported and requested. No additional certification or compliance claim is implied.
Before production, the buyer should confirm the final profile geometry, dimensions, finish reference, quantities, joint layout, support spacing, edge treatment, corner treatment, substrate conditions, accessories, labels, protective method, carton configuration, pallet plan, destination requirements, and inspection criteria. For phased projects, retained samples and batch comparison are recommended to manage visual consistency. The integrated hollow fluted wall panel range is positioned as a source-grounded decorative profile family for bulk purchasing, finish coordination, drawing-based review, sample confirmation, and repeatable interior project supply.
Ordering Information
- Confirm the exact material formulation and surface-film construction before order.
- Confirm profile geometry, dimensions, rib spacing, supports, joints, edges, and accessories against project drawings.
- Approve physical profile and finish samples before production.
- MOQ: 500 Square Meter / Each Color or Finish.
- Packing and production schedule: On Request.
- Documentation: CE and RoHS; supported test reports on request.



FAQ
Q1. How is it better than real timber?
A: Real timber needs oiling or staining every year, and even then it moves, splits and greys within two or three summers. WPC takes no water, so it cannot rot or feed termites, and the ASA cap holds colour without a coating. Upfront, hardwood costs less per square metre; over ten years the maintenance you avoid usually closes the gap. Where the wall is wet, coastal, shaded or pool-side, timber rarely survives long enough to argue about price.
Q2. Will the colour fade over time?
A: The cap is co-extruded ASA, which is UV-stabilised, so chalking and greying are slow rather than absent. Light greys, creams and woodtones hold best; saturated black, dark walnut and reds shift most because they absorb more solar energy. A south or west facade in a hot climate will show change sooner than a shaded one. Where the design allows, choose a mid or light tone and the difference after years is small.
Q3. How much movement must I allow?
A: WPC moves with temperature, roughly 5 mm at each end on a 2.9 m slat between a cold night and a hot afternoon, so leave that gap and let the clip carry it. Never butt slats hard against a wall, a corner or a starter track. If you fix rigidly through the face, the run has nowhere to go and will bow off the battens in the first heat wave; that is an installation error, not a material fault.
Q4. Can it be fixed straight onto the wall?
A: No. Fix treated battens or an aluminium sub-frame first, then clip the slats so a ventilated cavity of at least 20 mm sits behind them. The cavity lets water drain, lets the wall dry and keeps the profile off a damp surface. Fixed directly, trapped moisture shows up as efflorescence on masonry, blistering on render, and a green film in the shadow of the slat.
Q5. What fire rating does it carry?
A: The standard profile is not rated. On the flame-retardant grade the material reaches B1 to GB 8624, and CE and RoHS documents are supplied with the order. Where the project needs a European classification, tell us the class written in the specification and we confirm what we can support before you price it, rather than after the sample has been approved.
Q6. Is there formaldehyde or VOC?
A: No formaldehyde. The binder is HDPE, a polyolefin, not a urea, melamine or phenolic resin, and the wood flour is encapsulated in the polymer matrix instead of being glued. There is nothing in the profile to off-gas, which is why it is used inside bathrooms, clinics and shopfitting. RoHS documentation is available for buyers who need it on file.
Q7. How is it cleaned, and does it grow mould?
A: Wash with water and a soft brush once or twice a year, and use a mild household detergent where a film has built up. Algae and mildew grow on dirt and pollen sitting on the surface, not inside the material, so a wash removes them and they do not return from within. Avoid solvent cleaners and abrasive pads, which dull the cap, and keep a high-pressure jet away from the profile.
Q8. Can I use it indoors as well?
A: Yes, and this is often why buyers consolidate on one supplier. The same profile runs on bathroom and shower walls, reception features, ceilings, shopfitting and balcony soffits, and thinner indoor sections exist where depth is tight. One colour family then covers inside and outside, so a terrace and the room behind it read as a single scheme.
Q9. Can it be cut, curved or drilled on site?
A: Cut and drill with ordinary woodworking tools and a fine-tooth blade; a mitre saw gives a clean end, and a touch-up pen hides the cut. Gentle bends can be taken over a large radius, but tight curves and returns need a formed corner or a matching trim rather than force. Keep the cut end clear of the ground and seal it where the profile faces driven rain.
Q10. What is the MOQ, lead time and paperwork?
A: 500 square metres per order, with 7 to 30 days production depending on colour and profile, because a non-stock colour needs its own extrusion run. CE and RoHS documents ship with the order, and a cut sample of the actual cap goes out before you commit, so the colour is approved on the real surface. Give us the wall area and profile and we return a quantity with wastage included.
Hot Tags: wholesale hollow fluted wall panel for interior projects, China wholesale hollow fluted wall panel for interior projects manufacturers, suppliers, factory, WPC Ceiling Panel, WPC Cladding Panel, WPC Exterior Wall Cladding, WPC Interior Wall Panel, WPC Wall Cladding Interior, WPC Wall Panel Exterior









