Specifications
|
Item |
Specification |
|
Product Type |
Fluted Interior Wall Panel |
|
Visible Profile |
Broad Raised Ribs / Deep Recessed Channels / Rectangular Hollow Chambers / Side Joining Lip |
|
Visible Finishes |
Reddish Wood Grain / Gray Woven Texture / White Marble-Like / Taupe-Gray |
|
Source-Listed Base |
Bamboo Fiber - Confirm Before Order |
|
Source-Listed Process |
Water-Based Lamination - Confirm Before Order |
|
Source-Listed Positioning |
Installation-Ready - Confirm Before Order |
|
Panel Width |
On Request |
|
Panel Thickness |
On Request |
|
Panel Length |
On Request |
|
Installation System |
On Request |
|
Application |
Reception Feature Wall / Showroom Display Wall / Retail Interior Surface |
|
Custom Size |
Available after drawing and order review |
|
Private Label |
Available |
|
Sample Approval |
Available |
|
Mixed Container |
Available after order review |
|
Packing |
On Request |
|
MOQ |
500 Square Meter / Each Color or Finish |
|
Production Schedule |
On Request |
|
Certification |
CE · RoHS |
Product Introduction
A broad fluted interior wall-panel range with raised ribs, deep channels, rectangular hollow ends, side joining lips, and wood-grain, woven, marble-like, and solid finishes.
Detailed Description
The bamboo fiber fluted wall panel collection is intended for commercial reception areas, showroom display walls, retail interiors, hospitality spaces, offices, and residential-style fit-out projects requiring a broad linear surface rhythm. The supplied reference shows stacked panels with broad rectangular raised ribs, deep recessed channels, continuous backing webs, side joining lips, and visible rectangular hollow chambers at the cut ends. Visible finishes include warm reddish wood grain, gray woven texture, white marble-like pattern, and a taupe-gray solid appearance.
The source text presents the product as an environmentally oriented material and lists a bamboo-fiber base, a water-based lamination process, and an installation-ready positioning. These are source-listed claims only and must be confirmed before order. The image does not independently establish formulation, emissions, dimensions, weight, surface-layer specification, installation hardware, packing, production schedule, or performance rating. Those items are On Request. Buyers should not infer fire, acoustic, structural, moisture, ultraviolet, health, or environmental performance from marketing wording alone.
Project preparation should identify the installation area, panel direction, joint layout, edge treatment, openings, corners, transitions, substrate condition, support arrangement, access requirements, and selected finish. A physical profile and finish sample should be approved before production. Sample review should confirm the broad rib rhythm, channel depth, exposed chamber appearance, side joining lip, color, gloss, grain direction, woven texture, marble pattern, and visual response under the intended project lighting. Digital images do not replace approved samples, signed drawings, or installation planning.
Factory and wholesale coordination can include drawing review, dimension confirmation, cut-to-size review, finish sample approval, batch comparison, private-label packing, carton marking, pallet planning, and mixed-container support. The minimum order quantity is 500 Square Meter for each color or finish. CE and RoHS documentation may be supplied where applicable. Other material or performance reports are available only when supported and requested. No additional certification, environmental benefit, or performance claim is implied.
Before shipment, the buyer should confirm profile, finish reference, dimensions, quantity, installation accessories, labels, protective method, carton configuration, pallet plan, destination requirements, and inspection criteria. Batch comparison is recommended when one project is supplied in several phases or uses multiple finishes. The bamboo fiber fluted wall panel range is positioned for distributors, contractors, fit-out companies, project installers, and commercial buyers requiring finish coordination, documented sample approval, and repeatable bulk supply.
Ordering Information
- Confirm all source-listed material, process, and installation-positioning claims before order.
- Confirm profile, finish, dimensions, panel direction, joints, edge treatment, substrate, support arrangement, and accessories against the project drawing.
- Approve physical profile and finish samples before production.
- MOQ: 500 Square Meter / Each Color or Finish.
- Packing and production schedule: On Request.
- Documentation: CE and RoHS; supported test reports on request.



FAQ
Q1. How is it better than real timber?
A: Real timber needs oiling or staining every year, and even then it moves, splits and greys within two or three summers. WPC takes no water, so it cannot rot or feed termites, and the ASA cap holds colour without a coating. Upfront, hardwood costs less per square metre; over ten years the maintenance you avoid usually closes the gap. Where the wall is wet, coastal, shaded or pool-side, timber rarely survives long enough to argue about price.
Q2. Will the colour fade over time?
A: The cap is co-extruded ASA, which is UV-stabilised, so chalking and greying are slow rather than absent. Light greys, creams and woodtones hold best; saturated black, dark walnut and reds shift most because they absorb more solar energy. A south or west facade in a hot climate will show change sooner than a shaded one. Where the design allows, choose a mid or light tone and the difference after years is small.
Q3. How much movement must I allow?
A: WPC moves with temperature, roughly 5 mm at each end on a 2.9 m slat between a cold night and a hot afternoon, so leave that gap and let the clip carry it. Never butt slats hard against a wall, a corner or a starter track. If you fix rigidly through the face, the run has nowhere to go and will bow off the battens in the first heat wave; that is an installation error, not a material fault.
Q4. Can it be fixed straight onto the wall?
A: No. Fix treated battens or an aluminium sub-frame first, then clip the slats so a ventilated cavity of at least 20 mm sits behind them. The cavity lets water drain, lets the wall dry and keeps the profile off a damp surface. Fixed directly, trapped moisture shows up as efflorescence on masonry, blistering on render, and a green film in the shadow of the slat.
Q5. What fire rating does it carry?
A: The standard profile is not rated. On the flame-retardant grade the material reaches B1 to GB 8624, and CE and RoHS documents are supplied with the order. Where the project needs a European classification, tell us the class written in the specification and we confirm what we can support before you price it, rather than after the sample has been approved.
Q6. Is there formaldehyde or VOC?
A: No formaldehyde. The binder is HDPE, a polyolefin, not a urea, melamine or phenolic resin, and the wood flour is encapsulated in the polymer matrix instead of being glued. There is nothing in the profile to off-gas, which is why it is used inside bathrooms, clinics and shopfitting. RoHS documentation is available for buyers who need it on file.
Q7. How is it cleaned, and does it grow mould?
A: Wash with water and a soft brush once or twice a year, and use a mild household detergent where a film has built up. Algae and mildew grow on dirt and pollen sitting on the surface, not inside the material, so a wash removes them and they do not return from within. Avoid solvent cleaners and abrasive pads, which dull the cap, and keep a high-pressure jet away from the profile.
Q8. Can I use it indoors as well?
A: Yes, and this is often why buyers consolidate on one supplier. The same profile runs on bathroom and shower walls, reception features, ceilings, shopfitting and balcony soffits, and thinner indoor sections exist where depth is tight. One colour family then covers inside and outside, so a terrace and the room behind it read as a single scheme.
Q9. Can it be cut, curved or drilled on site?
A: Cut and drill with ordinary woodworking tools and a fine-tooth blade; a mitre saw gives a clean end, and a touch-up pen hides the cut. Gentle bends can be taken over a large radius, but tight curves and returns need a formed corner or a matching trim rather than force. Keep the cut end clear of the ground and seal it where the profile faces driven rain.
Q10. What is the MOQ, lead time and paperwork?
A: 500 square metres per order, with 7 to 30 days production depending on colour and profile, because a non-stock colour needs its own extrusion run. CE and RoHS documents ship with the order, and a cut sample of the actual cap goes out before you commit, so the colour is approved on the real surface. Give us the wall area and profile and we return a quantity with wastage included.
Hot Tags: bamboo fiber fluted wall panel with broad linear profile, China bamboo fiber fluted wall panel with broad linear profile manufacturers, suppliers, factory, WPC Ceiling Panel, WPC cladding panel length 2900mm, WPC cladding panel thickness 20mm, WPC Outdoor Wall Cladding, WPC Wall Cladding Exterior, WPC wall panel 10 additive formula









