Outdoor Rectangular Single-Cavity Hollow Architectural Profile
Outdoor Rectangular Single-Cavity Hollow Architectural Profile

Outdoor Rectangular Single-Cavity Hollow Architectural Profile

A seven-finish family of separate rectangular hollow profiles with one continuous through-cavity, thin uniform walls, flat faces, and square edges, positioned for outdoor project review subject to technical confirmation.
Send Inquiry

Specifications

 

Item

Specification

Product Type

Outdoor Rectangular Hollow Profile

Visible Structure

Single Through-Cavity / Thin Uniform Wall / Flat Faces / Square Edges

Visible Finishes

Light Wood / Red Brown / Dark Brown / Black / White / Light Gray / Medium Gray

Material Formulation

On Request

Profile Section

On Request

Wall Thickness

On Request

Profile Length

On Request

Installation System

On Request

Outdoor Performance

On Request

Concept Applications

Garden Pavilion Screen / Facade Sunscreen / Terrace Partition

Custom Size

Available after drawing and order review

Private Label

Available

Sample Approval

Available

Mixed Container

Available after order review

Packing

On Request

MOQ

500 Square Meter / Each Color or Finish

Production Schedule

On Request

Certification

CE · RoHS

 

Product Introduction

 

A seven-finish family of separate rectangular hollow profiles with one continuous through-cavity, thin uniform walls, flat faces, and square edges, positioned for outdoor project review subject to technical confirmation.

 

Detailed Description

 

The outdoor rectangular hollow architectural profile range is prepared for distributors, landscape contractors, facade specialists, pavilion builders, terrace contractors, and wholesale buyers seeking separate linear elements for outdoor architectural concepts. The user confirms outdoor positioning only. The supplied reference shows independent long narrow rectangular hollow profiles, each with one continuous square or rectangular through-cavity, thin uniform walls, flat outer faces, square corners, and multiple wood-grain and neutral finishes. These visible features define product identity. The profile material and outdoor-performance level cannot be established from the image.

The product is described generically because no series designation, material data sheet, dimension drawing, installation manual, or technical report was supplied. Exact material formulation, profile section, wall thickness, length, finish process, installation system, support details, accessories, packing configuration, production schedule, and outdoor performance remain On Request. The artwork uses garden pavilion screens, facade sunscreens, and terrace partitions as conceptual application settings. These scenes do not constitute test evidence, a warranty, or confirmation of suitability for every climate, structural span, wind exposure, substrate, mounting method, building height, or local code.

For project review, buyers should compare an approved physical sample with final drawings and intended exposure conditions. Sample approval should cover the single-cavity cross-section, wall consistency, flat faces, square edges, surface tone, grain direction, gloss, lighting response, and batch consistency. Engineering review should separately address profile orientation, support frame, spacing, span, joint layout, movement allowance, end treatment, corner details, fasteners, accessories, wind exposure, temperature range, ultraviolet exposure, moisture exposure, fire requirements, cleaning, maintenance, and local regulations. None of these criteria can be confirmed from the image alone.

Factory coordination may include drawing review, cut-to-size review, section-sample approval, finish matching, batch comparison, private-label packing, carton marking, pallet planning, and mixed-container support. The minimum order quantity is 500 Square Meter for each color or finish. CE and RoHS documentation may be supplied where applicable. Any additional material report, outdoor-performance report, test method, project submittal, or compliance document is available only when supported and requested. No other certification, rating, weather claim, environmental statement, stock promise, warranty, or free-sample commitment is implied.

Before production, confirm final section geometry, all dimensions, material formulation, finish reference, quantity, profile orientation, spacing, support frame, joint layout, fasteners, edge treatment, accessories, labels, protection method, carton configuration, pallet plan, destination requirements, exposure conditions, inspection criteria, and required reports. Retained samples and batch comparison are recommended for phased work. The outdoor rectangular hollow architectural profile range is positioned as a source-grounded family of separate single-cavity linear elements for bulk purchasing, drawing review, finish approval, private-label coordination, and repeatable project supply, subject to technical confirmation for the intended outdoor application.

 

Ordering Information

 

  • Confirm section geometry, dimensions, material, supports, spacing, spans, joints, fasteners, ends and accessories against project drawings.
  • Approve physical section and finish samples before production.
  • MOQ: 500 Square Meter / Each Color or Finish.
  • Packing, production schedule, outdoor performance and required reports: On Request.
  • Documentation: CE and RoHS; supported test reports on request.

 

535-detail-1-main

535-detail-2-specification

535-detail-3-application

 

FAQ

 

Q1. How is it better than real timber?

A: Real timber needs oiling or staining every year, and even then it moves, splits and greys within two or three summers. WPC takes no water, so it cannot rot or feed termites, and the ASA cap holds colour without a coating. Upfront, hardwood costs less per square metre; over ten years the maintenance you avoid usually closes the gap. Where the wall is wet, coastal, shaded or pool-side, timber rarely survives long enough to argue about price.

Q2. Will the colour fade over time?

A: The cap is co-extruded ASA, which is UV-stabilised, so chalking and greying are slow rather than absent. Light greys, creams and woodtones hold best; saturated black, dark walnut and reds shift most because they absorb more solar energy. A south or west facade in a hot climate will show change sooner than a shaded one. Where the design allows, choose a mid or light tone and the difference after years is small.

Q3. How much movement must I allow?

A: WPC moves with temperature, roughly 5 mm at each end on a 2.9 m slat between a cold night and a hot afternoon, so leave that gap and let the clip carry it. Never butt slats hard against a wall, a corner or a starter track. If you fix rigidly through the face, the run has nowhere to go and will bow off the battens in the first heat wave; that is an installation error, not a material fault.

Q4. Can it be fixed straight onto the wall?

A: No. Fix treated battens or an aluminium sub-frame first, then clip the slats so a ventilated cavity of at least 20 mm sits behind them. The cavity lets water drain, lets the wall dry and keeps the profile off a damp surface. Fixed directly, trapped moisture shows up as efflorescence on masonry, blistering on render, and a green film in the shadow of the slat.

Q5. What fire rating does it carry?

A: The standard profile is not rated. On the flame-retardant grade the material reaches B1 to GB 8624, and CE and RoHS documents are supplied with the order. Where the project needs a European classification, tell us the class written in the specification and we confirm what we can support before you price it, rather than after the sample has been approved.

Q6. Is there formaldehyde or VOC?

A: No formaldehyde. The binder is HDPE, a polyolefin, not a urea, melamine or phenolic resin, and the wood flour is encapsulated in the polymer matrix instead of being glued. There is nothing in the profile to off-gas, which is why it is used inside bathrooms, clinics and shopfitting. RoHS documentation is available for buyers who need it on file.

Q7. How is it cleaned, and does it grow mould?

A: Wash with water and a soft brush once or twice a year, and use a mild household detergent where a film has built up. Algae and mildew grow on dirt and pollen sitting on the surface, not inside the material, so a wash removes them and they do not return from within. Avoid solvent cleaners and abrasive pads, which dull the cap, and keep a high-pressure jet away from the profile.

Q8. Can I use it indoors as well?

A: Yes, and this is often why buyers consolidate on one supplier. The same profile runs on bathroom and shower walls, reception features, ceilings, shopfitting and balcony soffits, and thinner indoor sections exist where depth is tight. One colour family then covers inside and outside, so a terrace and the room behind it read as a single scheme.

Q9. Can it be cut, curved or drilled on site?

A: Cut and drill with ordinary woodworking tools and a fine-tooth blade; a mitre saw gives a clean end, and a touch-up pen hides the cut. Gentle bends can be taken over a large radius, but tight curves and returns need a formed corner or a matching trim rather than force. Keep the cut end clear of the ground and seal it where the profile faces driven rain.

Q10. What is the MOQ, lead time and paperwork?

A: 500 square metres per order, with 7 to 30 days production depending on colour and profile, because a non-stock colour needs its own extrusion run. CE and RoHS documents ship with the order, and a cut sample of the actual cap goes out before you commit, so the colour is approved on the real surface. Give us the wall area and profile and we return a quantity with wastage included.

Hot Tags: outdoor rectangular single-cavity hollow architectural profile, China outdoor rectangular single-cavity hollow architectural profile manufacturers, suppliers, factory, WPC Cladding, WPC Decorative Wall Panel, WPC Outdoor Wall Cladding, WPC Panel Board, WPC Wall Cladding Exterior, WPC Wall Panel Outdoor