Specifications
|
Item |
Specification |
|
Product Type |
WPC Outdoor Wide-Wave Wall Panel |
|
Visible Profile |
Continuous Thin Panel / Broad Crests / Smooth Valleys |
|
Visible Finishes |
Light Blue / Light Wood / Gray Wood / Dark Wood |
|
Material Formulation |
On Request |
|
Panel Width |
On Request |
|
Panel Thickness |
On Request |
|
Panel Length |
On Request |
|
Wave Spacing |
On Request |
|
Installation System |
On Request |
|
Performance Data |
On Request |
|
Application |
Hotel Terrace / Garden Pavilion / Commercial Facade Accent |
|
Custom Size |
Available after drawing and order review |
|
Private Label |
Available |
|
Sample Approval |
Available |
|
Mixed Container |
Available after order review |
|
Packing |
On Request |
|
MOQ |
500 Square Meter / Each Color or Finish |
|
Production Schedule |
On Request |
|
Certification |
CE · RoHS |
Product Introduction
A multi-finish outdoor architectural panel family with a thin continuous sheet, broad smooth wave crests, gently recessed valleys, and source-visible light-blue and wood-grain surfaces for exterior feature-wall projects.
Detailed Description
The WPC outdoor wave wall panel collection is prepared for distributors, contractors, facade coordinators, landscape-project buyers, and other wholesale customers seeking a distinctive linear architectural surface. The supplied reference shows a light-blue finish and several wood-grain finishes, including light natural wood, gray wood, and dark brown. Visible product identity is defined by a thin continuous panel sheet, broad smooth wave crests, gently recessed valleys, straight side edges, and a repeated wide-wave rhythm. The reference is used as the sole visual identity anchor; it is not independent proof of hidden construction, material formulation, dimensions, installation method, or performance.
This document therefore records only source-visible features and established ordering information. Exact material formulation, panel width, thickness, length, wave spacing, edge detail, surface process, fastening method, accessories, packing configuration, production schedule, and technical performance remain On Request. The user positions the product for outdoor WPC use, but no specific weathering period, ultraviolet rating, water-resistance class, fire rating, temperature range, structural capacity, or warranty value has been supplied. Those items must be confirmed through supported technical documents before use in specifications, contracts, listings, or project submissions.
For project review, the visible profile should be checked against an approved physical sample and the final drawing. Sample review should confirm the broad-wave rhythm, crest height, valley transition, edge appearance, grain direction, gloss, color response under daylight, and visual consistency between samples and production batches. Installation hardware and joint details are not visible in the reference and must be confirmed before order. The panel should not be interpreted as corrugated metal roofing, hollow grille tubes, narrow fluted slats, decking boards, or solid beams merely because its wide-wave surface creates a linear effect.
Factory coordination can cover drawing review, cut-to-size review, finish matching, profile-sample approval, batch comparison, private-label packing, carton marking, pallet planning, and mixed-container support. The minimum order quantity is 500 Square Meter for each color or finish. CE and RoHS documentation may be supplied where applicable. Any other material report, performance report, test method, project submittal, or compliance document is available only when supported and requested. No additional certification, rating, warranty, or performance claim is implied.
Before production, the buyer should confirm final profile geometry, all dimensions, finish reference, quantities, installation direction, joint layout, support spacing, edge treatment, corner treatment, substrate conditions, accessories, labels, protective method, carton configuration, pallet plan, destination requirements, and inspection criteria. For phased projects, retained samples and batch comparison are recommended to manage visual consistency. The WPC outdoor wave wall panel range is positioned as a source-grounded wide-wave architectural panel family for bulk purchasing, outdoor project coordination, finish approval, drawing-based review, sample confirmation, and repeatable project supply.
Ordering Information
- Confirm profile geometry, dimensions, wave spacing, supports, joints, edges, and accessories against project drawings.
- Approve physical profile and finish samples before production.
- MOQ: 500 Square Meter / Each Color or Finish.
- Packing, production schedule, and performance data: On Request.
- Documentation: CE and RoHS; supported test reports on request.



FAQ
Q1. How is it better than real timber?
A: Real timber needs oiling or staining every year, and even then it moves, splits and greys within two or three summers. WPC takes no water, so it cannot rot or feed termites, and the ASA cap holds colour without a coating. Upfront, hardwood costs less per square metre; over ten years the maintenance you avoid usually closes the gap. Where the wall is wet, coastal, shaded or pool-side, timber rarely survives long enough to argue about price.
Q2. Will the colour fade over time?
A: The cap is co-extruded ASA, which is UV-stabilised, so chalking and greying are slow rather than absent. Light greys, creams and woodtones hold best; saturated black, dark walnut and reds shift most because they absorb more solar energy. A south or west facade in a hot climate will show change sooner than a shaded one. Where the design allows, choose a mid or light tone and the difference after years is small.
Q3. How much movement must I allow?
A: WPC moves with temperature, roughly 5 mm at each end on a 2.9 m slat between a cold night and a hot afternoon, so leave that gap and let the clip carry it. Never butt slats hard against a wall, a corner or a starter track. If you fix rigidly through the face, the run has nowhere to go and will bow off the battens in the first heat wave; that is an installation error, not a material fault.
Q4. Can it be fixed straight onto the wall?
A: No. Fix treated battens or an aluminium sub-frame first, then clip the slats so a ventilated cavity of at least 20 mm sits behind them. The cavity lets water drain, lets the wall dry and keeps the profile off a damp surface. Fixed directly, trapped moisture shows up as efflorescence on masonry, blistering on render, and a green film in the shadow of the slat.
Q5. What fire rating does it carry?
A: The standard profile is not rated. On the flame-retardant grade the material reaches B1 to GB 8624, and CE and RoHS documents are supplied with the order. Where the project needs a European classification, tell us the class written in the specification and we confirm what we can support before you price it, rather than after the sample has been approved.
Q6. Is there formaldehyde or VOC?
A: No formaldehyde. The binder is HDPE, a polyolefin, not a urea, melamine or phenolic resin, and the wood flour is encapsulated in the polymer matrix instead of being glued. There is nothing in the profile to off-gas, which is why it is used inside bathrooms, clinics and shopfitting. RoHS documentation is available for buyers who need it on file.
Q7. How is it cleaned, and does it grow mould?
A: Wash with water and a soft brush once or twice a year, and use a mild household detergent where a film has built up. Algae and mildew grow on dirt and pollen sitting on the surface, not inside the material, so a wash removes them and they do not return from within. Avoid solvent cleaners and abrasive pads, which dull the cap, and keep a high-pressure jet away from the profile.
Q8. Can I use it indoors as well?
A: Yes, and this is often why buyers consolidate on one supplier. The same profile runs on bathroom and shower walls, reception features, ceilings, shopfitting and balcony soffits, and thinner indoor sections exist where depth is tight. One colour family then covers inside and outside, so a terrace and the room behind it read as a single scheme.
Q9. Can it be cut, curved or drilled on site?
A: Cut and drill with ordinary woodworking tools and a fine-tooth blade; a mitre saw gives a clean end, and a touch-up pen hides the cut. Gentle bends can be taken over a large radius, but tight curves and returns need a formed corner or a matching trim rather than force. Keep the cut end clear of the ground and seal it where the profile faces driven rain.
Q10. What is the MOQ, lead time and paperwork?
A: 500 square metres per order, with 7 to 30 days production depending on colour and profile, because a non-stock colour needs its own extrusion run. CE and RoHS documents ship with the order, and a cut sample of the actual cap goes out before you commit, so the colour is approved on the real surface. Give us the wall area and profile and we return a quantity with wastage included.
Hot Tags: wpc outdoor wide-wave wall panel, China wpc outdoor wide-wave wall panel manufacturers, suppliers, factory, Exterior WPC Wall Panel, WPC Cladding Panel, WPC cladding panel length 2900mm, WPC Decorative Wall Panel, WPC Outdoor Cladding, WPC Wall Cladding Interior









