Integrated Hollow Corrugated Wall Panel
Integrated Hollow Corrugated Wall Panel

Integrated Hollow Corrugated Wall Panel

A multi-finish architectural profile family with raised rectangular hollow ribs, broad flat valleys, a continuous backing web, side joining lips, and source-visible light-blue and wood-grain surfaces for commercial feature-wall projects.
Send Inquiry

Specifications

 

Item

Specification

Product Type

Integrated Hollow Corrugated Wall Panel

Visible Structure

Raised Hollow Ribs / Broad Flat Valleys / Continuous Backing Web / Side Joining Lip

Visible Finishes

Light Blue / Light Wood / Medium Wood / Dark Wood

Material Formulation

On Request

Panel Width

On Request

Panel Thickness

On Request

Panel Length

On Request

Rib Spacing

On Request

Installation System

On Request

Application

Commercial Lobby / Retail Showroom / Interior Accent Wall

Custom Size

Available after drawing and order review

Private Label

Available

Sample Approval

Available

Mixed Container

Available after order review

Packing

On Request

MOQ

500 Square Meter / Each Color or Finish

Production Schedule

On Request

Certification

CE · RoHS

 

Product Introduction

 

A multi-finish architectural profile family with raised rectangular hollow ribs, broad flat valleys, a continuous backing web, side joining lips, and source-visible light-blue and wood-grain surfaces for commercial feature-wall projects.

 

Detailed Description

 

The integrated hollow corrugated wall panel collection is prepared for distributors, contractors, interior-fit-out companies, commercial project buyers, and wholesale customers seeking a consistent linear architectural surface. The supplied reference shows one light-blue finish and several wood-grain finishes ranging from light natural wood through medium and dark brown. Visible product identity is defined by repeated raised rectangular hollow ribs, open rectangular cavities at the cut ends, broad recessed flat valleys, a continuous thin backing web, and small side joining lips. The reference is used as the product-identity anchor; it is not treated as proof of hidden composition, dimensions, or performance.

This document therefore records only what is visible and what has been established for ordering. Exact material formulation, panel width, thickness, length, rib spacing, wall thickness, surface process, fastening method, accessories, packing configuration, and production schedule remain On Request. Buyers should not derive structural, moisture, fire, ultraviolet, weathering, acoustic, thermal, or load-bearing performance from the source image. Any performance statement must be supported by the appropriate technical document for the confirmed product specification.

For project review, the visible profile geometry should be checked against an approved physical sample and the final drawing. Sample review should confirm the raised-rib rhythm, cavity shape, flat-valley width, backing-web appearance, joining lip, grain direction, gloss, exposed cut-end quality, and color response under the intended lighting. Installation details are not visible in the reference and must be confirmed before specification. The product should not be interpreted as separate square tubes, solid battens, generic flat boards, or decking merely because its raised ribs create a linear appearance.

Factory coordination can cover drawing review, cut-to-size review, finish matching, profile-sample approval, batch comparison, private-label packing, carton marking, pallet planning, and mixed-container support. The minimum order quantity is 500 Square Meter for each color or finish. CE and RoHS documentation may be supplied where applicable. Any other test report, material report, project submittal, or compliance document is available only when supported and requested. No additional certification, rating, warranty, or performance claim is implied.

Before production, the buyer should confirm the final profile geometry, all dimensions, finish reference, quantities, joint layout, support spacing, edge treatment, corner treatment, substrate conditions, accessories, labels, protection method, carton configuration, pallet plan, destination requirements, and inspection criteria. For phased projects, retained samples and batch comparison are recommended to manage visual consistency. The integrated hollow corrugated wall panel range is positioned as a source-grounded architectural profile family for bulk purchasing, finish coordination, drawing-based review, sample approval, and repeatable project supply.

 

Ordering Information

 

  • Confirm profile geometry, dimensions, rib spacing, supports, joints, edges, and accessories against project drawings.
  • Approve physical profile and finish samples before production.
  • MOQ: 500 Square Meter / Each Color or Finish.
  • Packing and production schedule: On Request.
  • Documentation: CE and RoHS; supported test reports on request.

 

528-detail-1-main

528-detail-2-specification

528-detail-3-application

 

FAQ

Q1. How is it better than real timber?

A: Real timber needs oiling or staining every year, and even then it moves, splits and greys within two or three summers. WPC takes no water, so it cannot rot or feed termites, and the ASA cap holds colour without a coating. Upfront, hardwood costs less per square metre; over ten years the maintenance you avoid usually closes the gap. Where the wall is wet, coastal, shaded or pool-side, timber rarely survives long enough to argue about price.

Q2. Will the colour fade over time?

A: The cap is co-extruded ASA, which is UV-stabilised, so chalking and greying are slow rather than absent. Light greys, creams and woodtones hold best; saturated black, dark walnut and reds shift most because they absorb more solar energy. A south or west facade in a hot climate will show change sooner than a shaded one. Where the design allows, choose a mid or light tone and the difference after years is small.

Q3. How much movement must I allow?

A: WPC moves with temperature, roughly 5 mm at each end on a 2.9 m slat between a cold night and a hot afternoon, so leave that gap and let the clip carry it. Never butt slats hard against a wall, a corner or a starter track. If you fix rigidly through the face, the run has nowhere to go and will bow off the battens in the first heat wave; that is an installation error, not a material fault.

Q4. Can it be fixed straight onto the wall?

A: No. Fix treated battens or an aluminium sub-frame first, then clip the slats so a ventilated cavity of at least 20 mm sits behind them. The cavity lets water drain, lets the wall dry and keeps the profile off a damp surface. Fixed directly, trapped moisture shows up as efflorescence on masonry, blistering on render, and a green film in the shadow of the slat.

Q5. What fire rating does it carry?

A: The standard profile is not rated. On the flame-retardant grade the material reaches B1 to GB 8624, and CE and RoHS documents are supplied with the order. Where the project needs a European classification, tell us the class written in the specification and we confirm what we can support before you price it, rather than after the sample has been approved.

Q6. Is there formaldehyde or VOC?

A: No formaldehyde. The binder is HDPE, a polyolefin, not a urea, melamine or phenolic resin, and the wood flour is encapsulated in the polymer matrix instead of being glued. There is nothing in the profile to off-gas, which is why it is used inside bathrooms, clinics and shopfitting. RoHS documentation is available for buyers who need it on file.

Q7. How is it cleaned, and does it grow mould?

A: Wash with water and a soft brush once or twice a year, and use a mild household detergent where a film has built up. Algae and mildew grow on dirt and pollen sitting on the surface, not inside the material, so a wash removes them and they do not return from within. Avoid solvent cleaners and abrasive pads, which dull the cap, and keep a high-pressure jet away from the profile.

Q8. Can I use it indoors as well?

A: Yes, and this is often why buyers consolidate on one supplier. The same profile runs on bathroom and shower walls, reception features, ceilings, shopfitting and balcony soffits, and thinner indoor sections exist where depth is tight. One colour family then covers inside and outside, so a terrace and the room behind it read as a single scheme.

Q9. Can it be cut, curved or drilled on site?

A: Cut and drill with ordinary woodworking tools and a fine-tooth blade; a mitre saw gives a clean end, and a touch-up pen hides the cut. Gentle bends can be taken over a large radius, but tight curves and returns need a formed corner or a matching trim rather than force. Keep the cut end clear of the ground and seal it where the profile faces driven rain.

Q10. What is the MOQ, lead time and paperwork?

A: 500 square metres per order, with 7 to 30 days production depending on colour and profile, because a non-stock colour needs its own extrusion run. CE and RoHS documents ship with the order, and a cut sample of the actual cap goes out before you commit, so the colour is approved on the real surface. Give us the wall area and profile and we return a quantity with wastage included.

Hot Tags: integrated hollow corrugated wall panel, China integrated hollow corrugated wall panel manufacturers, suppliers, factory, Outdoor WPC Wall Cladding, Wall Panel WPC, wood plastic composite panel solid core option, WPC Panel for Interior Walls, WPC Panel Outdoor, WPC Panel Wood