Outdoor 170-Series Six-Rib WPC Hollow Fluted Cladding Panel
Outdoor 170-Series Six-Rib WPC Hollow Fluted Cladding Panel

Outdoor 170-Series Six-Rib WPC Hollow Fluted Cladding Panel

An integrated 170-series six-rib hollow WPC decorative panel engineered for exterior facade cladding, courtyard garden screens, and architectural outdoor feature walls.
Send Inquiry

Specifications

 

Item

Specification

Product Type

Outdoor Integrated WPC Fluted Decorative Panel

Visible Profile

170-series, six raised rectangular ribs, wide channels, hollow cavities

Profile Series

170 Series (Width On Request)

Panel Length

2.9 m / 3 m / Custom

Surface Finish

Dark Wood Grain / Pure White / Charcoal Gray / Light Gray / Custom

Material Composition

On Request

Installation System

Interlocking Flange / Concealed Clips

Application

Villa Facade / Garden Fence / Privacy Screen / Commercial Exterior

Custom Finish

Available upon sample approval

Private Label

Available

Sample Approval

Available

Mixed Container

Available after order review

Packing

Export Pallet Packing / On Request

MOQ

500 Square Meter / Each Color or Finish

Production Schedule

On Request

Certification

CE · RoHS

 

Product Introduction

 

An integrated 170-series six-rib hollow WPC decorative panel engineered for exterior facade cladding, courtyard garden screens, and architectural outdoor feature walls.

 

Detailed Description

 

The outdoor WPC 170 fluted panel is engineered for modern outdoor architectural elevations, residential villa facade cladding, courtyard garden privacy fences, and exterior decorative partitions requiring a distinctive linear profile. The reference material confirms a 170-series specification featuring six raised rectangular hollow ribs, wide recessed fluted channels, rectangular inner cavities along the cut edge, and lateral interlocking flanges designed for concealed mechanical fixing. Finish directions shown in the sample family include dark wood grain, pure white, charcoal gray, and light gray tones.

Profile width belongs to the 170 mm series, while exact overall depth, thickness, panel length, material composition, surface embossing pattern, installation clip hardware, packing details, and production schedules are On Request. Finish options must be confirmed against current physical control samples. Buyers should not infer unsupported acoustic, fire, or structural ratings from catalog renders; all technical claims require supported third-party documentation and project review.

Exterior installation planning must account for wall dimensions, substructure joist spacing, vertical or horizontal orientation, start and corner trims, drainage clearances, thermal expansion gaps, and appropriate stainless-steel fixing accessories. Approving a signed physical sample is recommended prior to mass extrusion to confirm color consistency, surface grain, groove definition, and cut-edge quality under natural outdoor sunlight. Digital renders serve for preliminary styling and do not replace final engineering submittals.

Factory wholesale services encompass drawing review, cut-to-size length preparation, custom wood grain matching, private-label pallet packaging, pre-shipment batch inspection, and mixed-container shipment coordination. The minimum order quantity is 500 Square Meter for each color or finish. CE and RoHS compliance documentation can be provided where applicable, while supported material or physical property test reports remain available on request.

Before dispatch, buyers should verify selected dimensions, surface texture, accessories, quantity breakdown, pallet strapping, container loading plans, and customs documentation. Inspection of delivered batches is advised prior to on-site assembly to guarantee seamless alignment across project elevations. The outdoor WPC 170 fluted panel is positioned as a dependable, factory-coordinated exterior decorative component for distributors, outdoor landscaping contractors, facade installers, and commercial builders seeking repeatable bulk manufacturing.

 

Ordering Information

 

• Confirm 170-series profile cross-section, dimensions, and substructure requirements against architectural drawings.

• Approve physical finish samples prior to bulk production.

• MOQ: 500 Square Meter / Each Color or Finish.

• Packing and delivery timeline: On Request.

• Documentation: CE and RoHS; supported technical reports on request.

 

510-detail-1-main

510-detail-2-specification

510-detail-3-application

 

FAQ

Q1. How is it better than real timber?

A: Real timber needs oiling or staining every year, and even then it moves, splits and greys within two or three summers. WPC takes no water, so it cannot rot or feed termites, and the ASA cap holds colour without a coating. Upfront, hardwood costs less per square metre; over ten years the maintenance you avoid usually closes the gap. Where the wall is wet, coastal, shaded or pool-side, timber rarely survives long enough to argue about price.

Q2. Will the colour fade over time?

A: The cap is co-extruded ASA, which is UV-stabilised, so chalking and greying are slow rather than absent. Light greys, creams and woodtones hold best; saturated black, dark walnut and reds shift most because they absorb more solar energy. A south or west facade in a hot climate will show change sooner than a shaded one. Where the design allows, choose a mid or light tone and the difference after years is small.

Q3. How much movement must I allow?

A: WPC moves with temperature, roughly 5 mm at each end on a 2.9 m slat between a cold night and a hot afternoon, so leave that gap and let the clip carry it. Never butt slats hard against a wall, a corner or a starter track. If you fix rigidly through the face, the run has nowhere to go and will bow off the battens in the first heat wave; that is an installation error, not a material fault.

Q4. Can it be fixed straight onto the wall?

A: No. Fix treated battens or an aluminium sub-frame first, then clip the slats so a ventilated cavity of at least 20 mm sits behind them. The cavity lets water drain, lets the wall dry and keeps the profile off a damp surface. Fixed directly, trapped moisture shows up as efflorescence on masonry, blistering on render, and a green film in the shadow of the slat.

Q5. What fire rating does it carry?

A: The standard profile is not rated. On the flame-retardant grade the material reaches B1 to GB 8624, and CE and RoHS documents are supplied with the order. Where the project needs a European classification, tell us the class written in the specification and we confirm what we can support before you price it, rather than after the sample has been approved.

Q6. Is there formaldehyde or VOC?

A: No formaldehyde. The binder is HDPE, a polyolefin, not a urea, melamine or phenolic resin, and the wood flour is encapsulated in the polymer matrix instead of being glued. There is nothing in the profile to off-gas, which is why it is used inside bathrooms, clinics and shopfitting. RoHS documentation is available for buyers who need it on file.

Q7. How is it cleaned, and does it grow mould?

A: Wash with water and a soft brush once or twice a year, and use a mild household detergent where a film has built up. Algae and mildew grow on dirt and pollen sitting on the surface, not inside the material, so a wash removes them and they do not return from within. Avoid solvent cleaners and abrasive pads, which dull the cap, and keep a high-pressure jet away from the profile.

Q8. Can I use it indoors as well?

A: Yes, and this is often why buyers consolidate on one supplier. The same profile runs on bathroom and shower walls, reception features, ceilings, shopfitting and balcony soffits, and thinner indoor sections exist where depth is tight. One colour family then covers inside and outside, so a terrace and the room behind it read as a single scheme.

Q9. Can it be cut, curved or drilled on site?

A: Cut and drill with ordinary woodworking tools and a fine-tooth blade; a mitre saw gives a clean end, and a touch-up pen hides the cut. Gentle bends can be taken over a large radius, but tight curves and returns need a formed corner or a matching trim rather than force. Keep the cut end clear of the ground and seal it where the profile faces driven rain.

Q10. What is the MOQ, lead time and paperwork?

A: 500 square metres per order, with 7 to 30 days production depending on colour and profile, because a non-stock colour needs its own extrusion run. CE and RoHS documents ship with the order, and a cut sample of the actual cap goes out before you commit, so the colour is approved on the real surface. Give us the wall area and profile and we return a quantity with wastage included.

Hot Tags: outdoor 170-series six-rib wpc hollow fluted cladding panel, China outdoor 170-series six-rib wpc hollow fluted cladding panel manufacturers, suppliers, factory, Indoor WPC Wall Panel, Wall Panel WPC, Wood Panel WPC, WPC Outdoor Wall Cladding, WPC Panel for Walls, WPC panel width 150mm