Small Nine-Round Compact Multi-Round Wall Panel
Small Nine-Round Compact Multi-Round Wall Panel

Small Nine-Round Compact Multi-Round Wall Panel

A multi-finish architectural wall-panel family with a thin continuous backing, dense rounded ribs, repeated semicircular cavities, slim edges, and source-visible white, gray, black, and deep brown surfaces.
Send Inquiry

Specifications

 

Item

Specification

Product Type

Compact Multi-Round Interior Wall Panel

Source-Listed Series

Small Nine-Round - Exact Rib Count and Dimensions On Request

Visible Profile

Dense Rounded Ribs / Semicircular Cavities / Continuous Backing / Slim Edge

Visible Finishes

White / Light Gray / Black / Deep Brown

Material Formulation

On Request

Panel Width

On Request

Panel Thickness

On Request

Panel Length

On Request

Rib Spacing

On Request

Cavity Size

On Request

Installation System

On Request

Performance Data

On Request

Application

Hotel Bedroom / Retail Showroom / Interior Accent Wall

Custom Size

Available after drawing and order review

Private Label

Available

Sample Approval

Available

Mixed Container

Available after order review

Packing

On Request

MOQ

500 Square Meter / Each Color or Finish

Production Schedule

On Request

Certification

CE · RoHS

 

Product Introduction

 

A multi-finish architectural wall-panel family with a thin continuous backing, dense rounded ribs, repeated semicircular cavities, slim edges, and source-visible white, gray, black, and deep brown surfaces.

 

Detailed Description

 

The small nine-round architectural wall panel collection is prepared for distributors, interior-fit-out companies, hotel contractors, retail-display companies, and wholesale buyers seeking a compact linear architectural surface. The supplied reference uses the Chinese product name "Small Nine-Round Panel" and shows white, light gray, black, and deep brown finishes. Visible product identity is defined by a thin continuous backing, dense narrow rounded ribs, repeated semicircular open cavities at the cut end, slim side edges, and a regular longitudinal rhythm. The reference is used as the sole product-identity anchor; its company name and promotional statements are not retained as product facts or brand identity.

The name Small Nine-Round is retained as a source-listed series and appearance description. It is not treated as proof of an exact rib count, panel width, thickness, cavity diameter, or any other dimension. Exact material formulation, panel width, thickness, length, rib spacing, cavity size, surface process, installation method, accessories, packing configuration, inventory status, production schedule, and technical performance remain On Request. Source advertising refers to environmental safety, paint-free construction, installation convenience, ready stock, quality assurance, direct factory supply, and free samples. These claims require commercial or technical confirmation and must not be used as verified specifications, warranties, stock commitments, or performance statements without supporting evidence.

For project review, the visible profile should be checked against an approved physical sample and the final drawing. Sample review should confirm the compact rounded-rib rhythm, semicircular cavity shape, continuous backing, slim edge appearance, grain direction, gloss, color response under project lighting, and consistency between approved samples and production batches. Installation hardware and joint details are not visible in the reference and must be confirmed before order. The product should not be interpreted as broad three-wave panels, separate round tubes, square battens, decking boards, corrugated metal roofing, or solid beams merely because the surface creates a repeated linear effect.

Factory coordination can cover drawing review, cut-to-size review, finish matching, profile-sample approval, batch comparison, private-label packing, carton marking, pallet planning, and mixed-container support. The minimum order quantity is 500 Square Meter for each color or finish. CE and RoHS documentation may be supplied where applicable. Any other material report, performance report, test method, project submittal, or compliance document is available only when supported and requested. No additional certification, rating, environmental claim, warranty, stock promise, or free-sample commitment is implied.

Before production, the buyer should confirm final profile geometry, all dimensions, finish reference, quantities, installation direction, joint layout, support spacing, edge treatment, corner treatment, substrate conditions, accessories, labels, protective method, carton configuration, pallet plan, destination requirements, and inspection criteria. Retained samples and batch comparison are recommended for phased projects. The small nine-round architectural wall panel range is positioned as a source-grounded compact multi-round architectural panel family for bulk purchasing, drawing review, finish approval, sample confirmation, private-label coordination, and repeatable project supply.

 

Ordering Information

 

  • Confirm profile geometry, dimensions, rib spacing, cavity size, supports, joints, edges, and accessories against project drawings.
  • Approve physical profile and finish samples before production.
  • MOQ: 500 Square Meter / Each Color or Finish.
  • Packing, production schedule, and performance data: On Request.
  • Documentation: CE and RoHS; supported test reports on request.

 

531-detail-1-main

531-detail-2-specification

531-detail-3-application

 

FAQ

Q1. How is it better than real timber?

A: Real timber needs oiling or staining every year, and even then it moves, splits and greys within two or three summers. WPC takes no water, so it cannot rot or feed termites, and the ASA cap holds colour without a coating. Upfront, hardwood costs less per square metre; over ten years the maintenance you avoid usually closes the gap. Where the wall is wet, coastal, shaded or pool-side, timber rarely survives long enough to argue about price.

Q2. Will the colour fade over time?

A: The cap is co-extruded ASA, which is UV-stabilised, so chalking and greying are slow rather than absent. Light greys, creams and woodtones hold best; saturated black, dark walnut and reds shift most because they absorb more solar energy. A south or west facade in a hot climate will show change sooner than a shaded one. Where the design allows, choose a mid or light tone and the difference after years is small.

Q3. How much movement must I allow?

A: WPC moves with temperature, roughly 5 mm at each end on a 2.9 m slat between a cold night and a hot afternoon, so leave that gap and let the clip carry it. Never butt slats hard against a wall, a corner or a starter track. If you fix rigidly through the face, the run has nowhere to go and will bow off the battens in the first heat wave; that is an installation error, not a material fault.

Q4. Can it be fixed straight onto the wall?

A: No. Fix treated battens or an aluminium sub-frame first, then clip the slats so a ventilated cavity of at least 20 mm sits behind them. The cavity lets water drain, lets the wall dry and keeps the profile off a damp surface. Fixed directly, trapped moisture shows up as efflorescence on masonry, blistering on render, and a green film in the shadow of the slat.

Q5. What fire rating does it carry?

A: The standard profile is not rated. On the flame-retardant grade the material reaches B1 to GB 8624, and CE and RoHS documents are supplied with the order. Where the project needs a European classification, tell us the class written in the specification and we confirm what we can support before you price it, rather than after the sample has been approved.

Q6. Is there formaldehyde or VOC?

A: No formaldehyde. The binder is HDPE, a polyolefin, not a urea, melamine or phenolic resin, and the wood flour is encapsulated in the polymer matrix instead of being glued. There is nothing in the profile to off-gas, which is why it is used inside bathrooms, clinics and shopfitting. RoHS documentation is available for buyers who need it on file.

Q7. How is it cleaned, and does it grow mould?

A: Wash with water and a soft brush once or twice a year, and use a mild household detergent where a film has built up. Algae and mildew grow on dirt and pollen sitting on the surface, not inside the material, so a wash removes them and they do not return from within. Avoid solvent cleaners and abrasive pads, which dull the cap, and keep a high-pressure jet away from the profile.

Q8. Can I use it indoors as well?

A: Yes, and this is often why buyers consolidate on one supplier. The same profile runs on bathroom and shower walls, reception features, ceilings, shopfitting and balcony soffits, and thinner indoor sections exist where depth is tight. One colour family then covers inside and outside, so a terrace and the room behind it read as a single scheme.

Q9. Can it be cut, curved or drilled on site?

A: Cut and drill with ordinary woodworking tools and a fine-tooth blade; a mitre saw gives a clean end, and a touch-up pen hides the cut. Gentle bends can be taken over a large radius, but tight curves and returns need a formed corner or a matching trim rather than force. Keep the cut end clear of the ground and seal it where the profile faces driven rain.

Q10. What is the MOQ, lead time and paperwork?

A: 500 square metres per order, with 7 to 30 days production depending on colour and profile, because a non-stock colour needs its own extrusion run. CE and RoHS documents ship with the order, and a cut sample of the actual cap goes out before you commit, so the colour is approved on the real surface. Give us the wall area and profile and we return a quantity with wastage included.

Hot Tags: small nine-round compact multi-round wall panel, China small nine-round compact multi-round wall panel manufacturers, suppliers, factory, engineered sandwich panel fire B s1 d0, Exterior WPC Wall Panel, Outdoor WPC Wall Cladding, WPC Decorative Wall Panel, WPC Slat Panel, WPC Wood Slat Panel