Specifications
|
Item |
Specification |
|
Product Type |
Dense Round-Rib Interior Wall Panel |
|
Visible Profile |
Dense Rounded Ribs / Semicircular Cavities / Continuous Backing / Slim Edge |
|
Visible Finishes |
Deep Brown / White / Black / Light Gray |
|
Material Formulation |
On Request |
|
Panel Width |
On Request |
|
Panel Thickness |
On Request |
|
Panel Length |
On Request |
|
Rib Spacing |
On Request |
|
Cavity Size |
On Request |
|
Installation System |
On Request |
|
Performance Data |
On Request |
|
Application |
Hotel Reception / Retail Showroom / Executive Lounge |
|
Custom Size |
Available after drawing and order review |
|
Private Label |
Available |
|
Sample Approval |
Available |
|
Mixed Container |
Available after order review |
|
Packing |
On Request |
|
MOQ |
500 Square Meter / Each Color or Finish |
|
Production Schedule |
On Request |
|
Certification |
CE · RoHS |
Product Introduction
A multi-finish architectural wall-panel family with thin continuous backing, dense longitudinal rounded ribs, repeated semicircular cavities, slim edges, and source-visible deep brown, white, black, and light gray surfaces.
Detailed Description
The dense round-rib architectural wall panel range is prepared for distributors, interior contractors, hotel fit-out teams, retail-display companies, and wholesale buyers seeking a compact linear surface for commercial interior projects. The supplied reference shows a thin continuous panel with densely spaced longitudinal rounded ribs, repeated semicircular open cavities along the cut end, slim outer edges, and visible deep brown, white, black, and light gray finishes. These visible features define the product identity for this document and image set. The reference is the sole product-identity anchor; it does not provide verified dimensions, formulation, installation details, performance data, or certification evidence beyond the user-approved compliance scope.
The product is described generically as a Dense Round-Rib Wall Panel because no specific series name was supplied. This name refers only to the visible compact rib rhythm and does not prove a particular rib count, width, thickness, cavity diameter, length, or material composition. Exact material formulation, panel width, thickness, length, rib spacing, cavity size, surface process, installation system, accessories, packing configuration, production schedule, and technical performance remain On Request. No fire, moisture, acoustic, environmental, structural, paint-free, stock, warranty, or installation-performance claim is inferred from appearance.
For project review, buyers should compare an approved physical sample with the final drawing and installation plan. Sample approval should cover the repeated rounded-rib geometry, semicircular cavity shape, continuous backing, edge appearance, finish tone, grain direction, gloss, lighting response, and batch consistency. The panel should not be reinterpreted as a broad-wave sheet, square-fluted board, corrugated metal roof sheet, decking board, separate round tubes, independent battens, or solid beams. Installation hardware and joint details are not visible in the source and must be confirmed before an order is released.
Factory coordination may include drawing review, cut-to-size review, profile-sample approval, finish matching, batch comparison, private-label packing, carton marking, pallet planning, and mixed-container support. The minimum order quantity is 500 Square Meter for each color or finish. CE and RoHS documentation may be supplied where applicable. Any additional material report, performance report, test method, project submittal, or compliance document is available only when supported and requested. No other certification, rating, environmental statement, warranty, stock promise, or free-sample commitment is implied.
Before production, confirm final profile geometry, all dimensions, finish reference, quantity, installation direction, joint layout, support spacing, substrate, corner and edge treatment, accessories, labels, protective method, carton configuration, pallet plan, destination requirements, and inspection criteria. Retained samples and batch comparison are recommended for phased work. The dense round-rib architectural wall panel range is positioned as a source-grounded compact linear interior panel family for bulk purchasing, drawing review, finish approval, private-label coordination, and repeatable project supply.
Ordering Information
- Confirm profile geometry, dimensions, rib spacing, cavity size, supports, joints, edges, and accessories against project drawings.
- Approve physical profile and finish samples before production.
- MOQ: 500 Square Meter / Each Color or Finish.
- Packing, production schedule, and performance data: On Request.
- Documentation: CE and RoHS; supported test reports on request.



FAQ
Q1. How is it better than real timber?
A: Real timber needs oiling or staining every year, and even then it moves, splits and greys within two or three summers. WPC takes no water, so it cannot rot or feed termites, and the ASA cap holds colour without a coating. Upfront, hardwood costs less per square metre; over ten years the maintenance you avoid usually closes the gap. Where the wall is wet, coastal, shaded or pool-side, timber rarely survives long enough to argue about price.
Q2. Will the colour fade over time?
A: The cap is co-extruded ASA, which is UV-stabilised, so chalking and greying are slow rather than absent. Light greys, creams and woodtones hold best; saturated black, dark walnut and reds shift most because they absorb more solar energy. A south or west facade in a hot climate will show change sooner than a shaded one. Where the design allows, choose a mid or light tone and the difference after years is small.
Q3. How much movement must I allow?
A: WPC moves with temperature, roughly 5 mm at each end on a 2.9 m slat between a cold night and a hot afternoon, so leave that gap and let the clip carry it. Never butt slats hard against a wall, a corner or a starter track. If you fix rigidly through the face, the run has nowhere to go and will bow off the battens in the first heat wave; that is an installation error, not a material fault.
Q4. Can it be fixed straight onto the wall?
A: No. Fix treated battens or an aluminium sub-frame first, then clip the slats so a ventilated cavity of at least 20 mm sits behind them. The cavity lets water drain, lets the wall dry and keeps the profile off a damp surface. Fixed directly, trapped moisture shows up as efflorescence on masonry, blistering on render, and a green film in the shadow of the slat.
Q5. What fire rating does it carry?
A: The standard profile is not rated. On the flame-retardant grade the material reaches B1 to GB 8624, and CE and RoHS documents are supplied with the order. Where the project needs a European classification, tell us the class written in the specification and we confirm what we can support before you price it, rather than after the sample has been approved.
Q6. Is there formaldehyde or VOC?
A: No formaldehyde. The binder is HDPE, a polyolefin, not a urea, melamine or phenolic resin, and the wood flour is encapsulated in the polymer matrix instead of being glued. There is nothing in the profile to off-gas, which is why it is used inside bathrooms, clinics and shopfitting. RoHS documentation is available for buyers who need it on file.
Q7. How is it cleaned, and does it grow mould?
A: Wash with water and a soft brush once or twice a year, and use a mild household detergent where a film has built up. Algae and mildew grow on dirt and pollen sitting on the surface, not inside the material, so a wash removes them and they do not return from within. Avoid solvent cleaners and abrasive pads, which dull the cap, and keep a high-pressure jet away from the profile.
Q8. Can I use it indoors as well?
A: Yes, and this is often why buyers consolidate on one supplier. The same profile runs on bathroom and shower walls, reception features, ceilings, shopfitting and balcony soffits, and thinner indoor sections exist where depth is tight. One colour family then covers inside and outside, so a terrace and the room behind it read as a single scheme.
Q9. Can it be cut, curved or drilled on site?
A: Cut and drill with ordinary woodworking tools and a fine-tooth blade; a mitre saw gives a clean end, and a touch-up pen hides the cut. Gentle bends can be taken over a large radius, but tight curves and returns need a formed corner or a matching trim rather than force. Keep the cut end clear of the ground and seal it where the profile faces driven rain.
Q10. What is the MOQ, lead time and paperwork?
A: 500 square metres per order, with 7 to 30 days production depending on colour and profile, because a non-stock colour needs its own extrusion run. CE and RoHS documents ship with the order, and a cut sample of the actual cap goes out before you commit, so the colour is approved on the real surface. Give us the wall area and profile and we return a quantity with wastage included.
Hot Tags: dense round-rib compact linear wall panel, China dense round-rib compact linear wall panel manufacturers, suppliers, factory, Wood Panel WPC, WPC Fence Panel, wpc panel, WPC Slat Panel, WPC wall panel 60 wood fiber, WPC Wood Panel Outdoor









