Interior WPC Curved Wave Fluted Decorative Wall Panel
Interior WPC Curved Wave Fluted Decorative Wall Panel

Interior WPC Curved Wave Fluted Decorative Wall Panel

An integrated curved wave hollow WPC decorative wall panel engineered for interior commercial reception, hospitality, and residential luxury accent wall applications.
Send Inquiry

Specifications

 

Item

Specification

Product Type

Interior Integrated WPC Wave Fluted Decorative Panel

Visible Profile

Curved wave flutes, smooth arc crests, arch inner cavities

Profile Type

Wave Fluted Profile (Width On Request)

Panel Length

2.9 m / 3 m / Custom

Surface Finish

Charcoal Gray / Pure White / Warm Beige / Sage Green / Wood Grain

Material Composition

Interior Eco WPC Composite (On Request)

Installation System

Interlocking Tongue & Groove / Hidden Clips

Application

Feature Wall / Hotel Lobby / Reception / Living Room / Commercial Interior

Custom Finish

Available upon sample approval

Private Label

Available

Sample Approval

Available

Mixed Container

Available after order review

Packing

Export Carton & Pallet / On Request

MOQ

500 Square Meter / Each Color or Finish

Production Schedule

On Request

Certification

CE · RoHS

 

Product Introduction

 

An integrated curved wave hollow WPC decorative wall panel engineered for interior commercial reception, hospitality, and residential luxury accent wall applications.

 

Detailed Description

 

The interior WPC wave fluted panel is developed for contemporary interior wall decoration, commercial reception areas, hotel lobby feature walls, retail boutiques, residential living room accent walls, and bedroom headboard cladding requiring a soft, sculpted linear rhythm. The visible profile is an integrated wood-plastic composite panel featuring continuous curved wave flutes, smooth semicircular crests, arch-shaped longitudinal inner cavities along the cut edge, and side interlocking tongue-and-groove flanges for seamless hidden fixing. The reference material showcases a versatile designer color palette including charcoal gray, pure white, warm champagne beige, pastel sage green, and natural brown wood grain.

Exact profile width, wave pitch, overall thickness, panel length, core material formulation, surface finish lamination, installation clip accessories, packing configurations, and production schedules are On Request. Color and surface texture availability must be verified against current physical control samples. Buyers should not infer unsupported acoustic, fire, or structural ratings from catalog renders; all technical claims require supported third-party documentation and project review.

Interior installation planning must establish wall layout, substrate preparation, vertical or horizontal battens, start and corner trims, expansion clearances, electrical cutouts, and concealed clip positioning. Approving a signed physical sample is recommended prior to mass extrusion to confirm color consistency, surface sheen, wave curvature, and cut-edge quality under intended room lighting. Digital renders serve for preliminary styling and do not replace final architectural submittals.

Factory wholesale services encompass profile drawing review, cut-to-size length preparation, custom color and wood grain matching, private-label carton and pallet packaging, pre-shipment batch inspection, and mixed-container shipment coordination. The minimum order quantity is 500 Square Meter for each color or finish. CE and RoHS compliance documentation can be provided where applicable, while supported material or physical property test reports remain available on request.

Before dispatch, buyers should verify selected dimensions, surface texture, accessories, quantity breakdown, pallet strapping, container loading plans, and customs documentation. Inspection of delivered batches is advised prior to on-site assembly to guarantee seamless alignment across interior wall surfaces. The interior WPC wave fluted panel is positioned as a dependable, factory-coordinated interior decorative component for distributors, interior fit-out contractors, acoustic designers, and commercial builders seeking repeatable bulk manufacturing.

 

Ordering Information

 

• Confirm wave profile curvature, dimensions, and substructure requirements against architectural drawings.

• Approve physical finish and color samples prior to bulk production.

• MOQ: 500 Square Meter / Each Color or Finish.

• Packing and delivery timeline: On Request.

• Documentation: CE and RoHS; supported technical reports on request.

 

511-detail-1-main

511-detail-2-specification

511-detail-3-application

 

FAQ

Q1. How is it better than real timber?

A: Real timber needs oiling or staining every year, and even then it moves, splits and greys within two or three summers. WPC takes no water, so it cannot rot or feed termites, and the ASA cap holds colour without a coating. Upfront, hardwood costs less per square metre; over ten years the maintenance you avoid usually closes the gap. Where the wall is wet, coastal, shaded or pool-side, timber rarely survives long enough to argue about price.

Q2. Will the colour fade over time?

A: The cap is co-extruded ASA, which is UV-stabilised, so chalking and greying are slow rather than absent. Light greys, creams and woodtones hold best; saturated black, dark walnut and reds shift most because they absorb more solar energy. A south or west facade in a hot climate will show change sooner than a shaded one. Where the design allows, choose a mid or light tone and the difference after years is small.

Q3. How much movement must I allow?

A: WPC moves with temperature, roughly 5 mm at each end on a 2.9 m slat between a cold night and a hot afternoon, so leave that gap and let the clip carry it. Never butt slats hard against a wall, a corner or a starter track. If you fix rigidly through the face, the run has nowhere to go and will bow off the battens in the first heat wave; that is an installation error, not a material fault.

Q4. Can it be fixed straight onto the wall?

A: No. Fix treated battens or an aluminium sub-frame first, then clip the slats so a ventilated cavity of at least 20 mm sits behind them. The cavity lets water drain, lets the wall dry and keeps the profile off a damp surface. Fixed directly, trapped moisture shows up as efflorescence on masonry, blistering on render, and a green film in the shadow of the slat.

Q5. What fire rating does it carry?

A: The standard profile is not rated. On the flame-retardant grade the material reaches B1 to GB 8624, and CE and RoHS documents are supplied with the order. Where the project needs a European classification, tell us the class written in the specification and we confirm what we can support before you price it, rather than after the sample has been approved.

Q6. Is there formaldehyde or VOC?

A: No formaldehyde. The binder is HDPE, a polyolefin, not a urea, melamine or phenolic resin, and the wood flour is encapsulated in the polymer matrix instead of being glued. There is nothing in the profile to off-gas, which is why it is used inside bathrooms, clinics and shopfitting. RoHS documentation is available for buyers who need it on file.

Q7. How is it cleaned, and does it grow mould?

A: Wash with water and a soft brush once or twice a year, and use a mild household detergent where a film has built up. Algae and mildew grow on dirt and pollen sitting on the surface, not inside the material, so a wash removes them and they do not return from within. Avoid solvent cleaners and abrasive pads, which dull the cap, and keep a high-pressure jet away from the profile.

Q8. Can I use it indoors as well?

A: Yes, and this is often why buyers consolidate on one supplier. The same profile runs on bathroom and shower walls, reception features, ceilings, shopfitting and balcony soffits, and thinner indoor sections exist where depth is tight. One colour family then covers inside and outside, so a terrace and the room behind it read as a single scheme.

Q9. Can it be cut, curved or drilled on site?

A: Cut and drill with ordinary woodworking tools and a fine-tooth blade; a mitre saw gives a clean end, and a touch-up pen hides the cut. Gentle bends can be taken over a large radius, but tight curves and returns need a formed corner or a matching trim rather than force. Keep the cut end clear of the ground and seal it where the profile faces driven rain.

Q10. What is the MOQ, lead time and paperwork?

A: 500 square metres per order, with 7 to 30 days production depending on colour and profile, because a non-stock colour needs its own extrusion run. CE and RoHS documents ship with the order, and a cut sample of the actual cap goes out before you commit, so the colour is approved on the real surface. Give us the wall area and profile and we return a quantity with wastage included.

Hot Tags: interior wpc curved wave fluted decorative wall panel, China interior wpc curved wave fluted decorative wall panel manufacturers, suppliers, factory, engineered sandwich panel fire B s1 d0, WPC Exterior Cladding, WPC Exterior Wall Panel, WPC panel 3D wood grain emboss, WPC Wall Cladding Exterior, WPC Wall Panel Outdoor