Specifications
|
Item |
Specification |
|
Product Type |
WPC 160 Series Integrated Hollow Grille Panel |
|
Visible Structure |
Raised Hollow Ribs / Continuous Backing Web / Side Joining Lip |
|
Visible Finishes |
Light Wood / Warm Wood / Reddish Brown / Walnut / Deep Dark Brown |
|
Source-Listed Series |
160 Series - Confirm Before Order |
|
Dimensional Meaning of 160 |
Not Confirmed; Do Not Treat as 160 mm Without Verification |
|
Material Formulation |
On Request |
|
Panel Width |
On Request |
|
Panel Thickness |
On Request |
|
Panel Length |
On Request |
|
Rib Spacing |
On Request |
|
Installation System |
On Request |
|
Application |
Architectural Feature Wall / Commercial Interior / Showroom / Accent Wall |
|
Custom Size |
Available after drawing and order review |
|
Private Label |
Available |
|
Sample Approval |
Available |
|
Mixed Container |
Available after order review |
|
Packing |
On Request |
|
MOQ |
500 Square Meter / Each Color or Finish |
|
Production Schedule |
On Request |
|
Certification |
CE · RoHS |
Product Introduction
A multi-finish architectural grille-profile range with raised rectangular hollow ribs, continuous backing webs, side joining lips, and visible wood-grain surfaces for commercial feature-wall projects.
Detailed Description
The WPC 160 series hollow grille panel collection is prepared for distributors, contractors, interior-fit-out companies, commercial project buyers, and other wholesale customers seeking a consistent linear architectural surface. The supplied reference presents a family of long profiles in light natural wood, warm medium wood, reddish brown, walnut brown, and deep dark brown finishes. Visible product identity is defined by repeated raised rectangular hollow ribs, open rectangular cavities at the cut ends, recessed longitudinal channels, a continuous backing web, and side joining lips. The reference is treated as the visual identity anchor; it is not used as independent proof of hidden composition or performance.
The source calls the product a 160 series grille board. In this document, 160 is retained only as a source-listed series designation that must be confirmed before order. It is not presented as a verified 160 mm width or any other dimensional value. The exact panel width, thickness, length, rib spacing, wall thickness, material formulation, density, surface process, fastening method, accessories, packing configuration, and production schedule remain On Request. Buyers should not derive structural, moisture, fire, ultraviolet, weathering, acoustic, or load-bearing performance from the marketing image alone.
The source also displays Chinese promotional wording related to moisture resistance, visual depth, convenient installation, extrusion foaming, and custom processing. These are source-listed marketing claims only and require technical confirmation before they are used in a purchase specification, listing, drawing, contract, or project submittal. Project preparation should instead begin with an approved physical profile sample, an approved finish sample, and confirmed installation information. Sample review should verify the visible rib rhythm, cavity shape, backing-web appearance, joining lip, grain direction, gloss, exposed cut-end quality, and color response under the intended lighting.
Factory coordination can cover drawing review, cut-to-size review, finish matching, sample approval, batch comparison, private-label packing, carton marking, pallet planning, and mixed-container support. The minimum order quantity is 500 Square Meter for each color or finish. CE and RoHS documentation may be supplied where applicable. Any other material report, performance report, test method, or project document is available only when supported and requested. No additional certification, rating, warranty, or compliance claim is implied.
Before production, the buyer should confirm the series name, final profile geometry, dimensions, finish reference, quantities, joint layout, support spacing, edge treatment, corner treatment, substrate conditions, accessories, labels, protective method, carton configuration, pallet plan, destination requirements, and inspection criteria. For phased projects, retained samples and batch comparison are recommended to manage visual consistency. The WPC 160 series hollow grille panel range is positioned as a source-grounded architectural profile family for bulk purchasing, finish coordination, drawing-based review, sample confirmation, and repeatable project supply.
Ordering Information
- Confirm the source-listed 160 series designation and its exact dimensional meaning before order.
- Confirm profile geometry, dimensions, rib spacing, supports, joints, edges, and accessories against project drawings.
- Approve physical profile and finish samples before production.
- MOQ: 500 Square Meter / Each Color or Finish.
- Packing and production schedule: On Request.
- Documentation: CE and RoHS; supported test reports on request.



FAQ
Q1. How is it better than real timber?
A: Real timber needs oiling or staining every year, and even then it moves, splits and greys within two or three summers. WPC takes no water, so it cannot rot or feed termites, and the ASA cap holds colour without a coating. Upfront, hardwood costs less per square metre; over ten years the maintenance you avoid usually closes the gap. Where the wall is wet, coastal, shaded or pool-side, timber rarely survives long enough to argue about price.
Q2. Will the colour fade over time?
A: The cap is co-extruded ASA, which is UV-stabilised, so chalking and greying are slow rather than absent. Light greys, creams and woodtones hold best; saturated black, dark walnut and reds shift most because they absorb more solar energy. A south or west facade in a hot climate will show change sooner than a shaded one. Where the design allows, choose a mid or light tone and the difference after years is small.
Q3. How much movement must I allow?
A: WPC moves with temperature, roughly 5 mm at each end on a 2.9 m slat between a cold night and a hot afternoon, so leave that gap and let the clip carry it. Never butt slats hard against a wall, a corner or a starter track. If you fix rigidly through the face, the run has nowhere to go and will bow off the battens in the first heat wave; that is an installation error, not a material fault.
Q4. Can it be fixed straight onto the wall?
A: No. Fix treated battens or an aluminium sub-frame first, then clip the slats so a ventilated cavity of at least 20 mm sits behind them. The cavity lets water drain, lets the wall dry and keeps the profile off a damp surface. Fixed directly, trapped moisture shows up as efflorescence on masonry, blistering on render, and a green film in the shadow of the slat.
Q5. What fire rating does it carry?
A: The standard profile is not rated. On the flame-retardant grade the material reaches B1 to GB 8624, and CE and RoHS documents are supplied with the order. Where the project needs a European classification, tell us the class written in the specification and we confirm what we can support before you price it, rather than after the sample has been approved.
Q6. Is there formaldehyde or VOC?
A: No formaldehyde. The binder is HDPE, a polyolefin, not a urea, melamine or phenolic resin, and the wood flour is encapsulated in the polymer matrix instead of being glued. There is nothing in the profile to off-gas, which is why it is used inside bathrooms, clinics and shopfitting. RoHS documentation is available for buyers who need it on file.
Q7. How is it cleaned, and does it grow mould?
A: Wash with water and a soft brush once or twice a year, and use a mild household detergent where a film has built up. Algae and mildew grow on dirt and pollen sitting on the surface, not inside the material, so a wash removes them and they do not return from within. Avoid solvent cleaners and abrasive pads, which dull the cap, and keep a high-pressure jet away from the profile.
Q8. Can I use it indoors as well?
A: Yes, and this is often why buyers consolidate on one supplier. The same profile runs on bathroom and shower walls, reception features, ceilings, shopfitting and balcony soffits, and thinner indoor sections exist where depth is tight. One colour family then covers inside and outside, so a terrace and the room behind it read as a single scheme.
Q9. Can it be cut, curved or drilled on site?
A: Cut and drill with ordinary woodworking tools and a fine-tooth blade; a mitre saw gives a clean end, and a touch-up pen hides the cut. Gentle bends can be taken over a large radius, but tight curves and returns need a formed corner or a matching trim rather than force. Keep the cut end clear of the ground and seal it where the profile faces driven rain.
Q10. What is the MOQ, lead time and paperwork?
A: 500 square metres per order, with 7 to 30 days production depending on colour and profile, because a non-stock colour needs its own extrusion run. CE and RoHS documents ship with the order, and a cut sample of the actual cap goes out before you commit, so the colour is approved on the real surface. Give us the wall area and profile and we return a quantity with wastage included.
Hot Tags: wpc 160 series integrated hollow grille panel, China wpc 160 series integrated hollow grille panel manufacturers, suppliers, factory, WPC Cladding, WPC Exterior Cladding, WPC Slat Panel, WPC wall panel 10 additive formula, WPC Wall Panel Outdoor, WPC Wood Panel









