Real Wood Veneer Aluminum Honeycomb Panel

A: A Real Wood Veneer Aluminum Honeycomb Panel (实木皮铝蜂窝板) is a premium composite panel that combines the authentic beauty of natural real wood veneer (0.3–0.6mm thick) on the surface with an aluminum honeycomb core for lightweight strength and dimensional stability. Unlike printed or laminated faux-wood surfaces, this panel uses genuine hand-selected wood veneer sheets - each with unique natural grain patterns. The panel is ideal for high-end interior applications where the warmth and authenticity of real wood is desired, combined with the modern performance of aluminum honeycomb engineering.
• Surface: Real natural wood veneer, 0.3–0.6mm, UV lacquered finish
• Core: Aluminum honeycomb (hexagonal), 8–18mm
• Backing: Aluminum skin + balancing layer for anti-warp stability
• Total thickness: 10mm, 12mm, 15mm, 20mm
• Wood species: Oak, walnut, teak, ash, cherry, maple, ebony, zebrawood + more

A: Common specifications:
• Total thickness: 10mm, 12mm, 15mm, 20mm
• Panel size: 1220×2440mm standard; custom up to 1220×4000mm
• Wood veneer: 0.3mm, 0.5mm, 0.6mm thickness
• Core: Aluminum honeycomb, hexagonal cell structure
• Aluminum skins: 0.5–0.8mm (top and bottom)
• Finish: UV matte, UV satin, UV gloss, natural oil, wax
• Wood species: European Oak, American Walnut, Burmese Teak, White Ash, American Cherry, Canadian Maple, Ebony Macassar, Zebrawood - 30+ species available
• Veneer cut: Crown cut (cathedral grain), quarter cut (straight grain), rotary cut (continuous grain), rift cut
• Matching: Book-match, slip-match, random match
• Fire rating: B1 (GB 8624)
• Formaldehyde: E0 / Zero emission from core
• Weight: 4.0–7.0 kg/sqm (varies by thickness)

A: The typical MOQ is 100 square meters for standard wood species and thicknesses.
• 100–299 sqm: Standard pricing
• 300–799 sqm: Volume-discounted pricing
• 800+ sqm: Best-volume pricing
Exotic species (ebony, zebrawood) may require higher MOQs due to veneer availability. Custom veneer cuts or book-match layouts may have a 150 sqm minimum. Free A4 sample sets of selected wood species are available.

A: Common applications:
• Hotel lobbies & luxury suites: Premium feature walls with genuine walnut, oak, or teak veneer - authentic natural beauty
• High-end residential interiors: Living room accent walls, bedroom headboard panels, villa decoration
• Corporate boardrooms & executive offices: Warm wood wall cladding with acoustic benefits from honeycomb core
• Retail boutiques & flagship stores: Brand-defining wood interior displays and wall finishes
• Yacht & marine interiors: Lightweight panels with natural wood appearance - critical for weight-sensitive applications
• Furniture & cabinetry: Premium table tops, cabinet doors, sliding door panels with real wood surface
• Museums & galleries: Display wall panels with natural material authenticity

A: ① 70% lighter than solid wood - 4–7 kg/sqm vs. 15–25 kg/sqm; easier handling, shipping, and installation
② No warping - aluminum honeycomb core provides dimensional stability; solid wood expands and contracts with humidity
③ Termite-proof - aluminum core eliminates the primary vulnerability of wood products in tropical climates
④ Fire-rated B1 - aluminum core is non-combustible; solid wood panels are combustible
⑤ E0 formaldehyde - aluminum core emits zero formaldehyde; MDF substrates emit formaldehyde over time
⑥ Better acoustics - honeycomb core provides sound dampening; solid wood reflects sound
⑦ Sustainable - uses a thin real wood veneer (0.5mm) rather than thick solid wood; conserves premium timber resources
⑧ Large single panels - up to 1220×4000mm in one piece; solid wood is limited by tree dimensions and joint lines

A: Wood species (30+ available):
• European Oak: Golden brown, straight grain - most popular, versatile
• American Walnut: Rich dark brown, cathedral grain - luxury classic
• Burmese Teak: Warm golden, fine grain - premium, weather resistant
• White Ash: Light cream, bold grain - Scandinavian modern
• American Cherry: Reddish brown, smooth - warm elegance, darkens with age
• Canadian Maple: Pale cream, subtle grain - minimalist clean
• Ebony Macassar: Dark with light stripes - exotic statement
• Zebrawood: Alternating light/dark stripes - dramatic architectural accent
Veneer cut (grain pattern):
• Crown cut (flat cut): Classic cathedral grain arch pattern
• Quarter cut: Straight, vertical grain lines - formal, uniform appearance
• Rotary cut: Continuous, broad grain pattern - maximum yield
• Rift cut: Narrow, straight grain - consistent minimal figure
Matching: Book-match (mirror grain), slip-match (sequential grain), random match
Finish: UV matte (anti-fingerprint, natural), UV satin (soft sheen), UV gloss (high shine), natural oil (deep penetration, matte), wax (traditional luster)

A: Yes. The panel is rated B1 (Fire-Retardant) under GB 8624. The aluminum honeycomb core and aluminum skins are non-combustible. The real wood veneer surface (0.5mm) is a very thin organic layer that does not contribute significantly to fire load. The complete panel meets interior wall cladding fire safety requirements for commercial and public buildings. Third-party fire test reports are available upon request.

A: • Standard wood species, UV satin finish: 10–15 working days
• Quarter-cut or book-match specification: 15–22 working days
• Exotic species (ebony, zebrawood): 20–30 working days (veneer sourcing)
• Custom panel size or thickness: 18–25 working days
• Large-volume orders (500+ sqm): 25–35 working days
Lead times include veneer selection, conditioning, aluminum honeycomb expansion, hot-press bonding, UV lacquer finishing, and quality inspection. Natural wood is a variable material - we allocate time for careful veneer matching.

A: Packaging: Each panel's decorative wood veneer surface is protected with PE film with UV inhibitors to prevent light exposure. Panels are stacked face-to-face with soft felt interlayer pads, with reinforced cardboard corner protectors, and secured in custom plywood crates. Wood is a delicate surface - our packaging is designed to prevent any surface abrasion or edge damage.
Shipping:
• Domestic: Dedicated climate-controlled logistics recommended for high-value panels
• International: FCL sea freight (FOB/CIF) in 20GP or 40HQ containers; LCL for smaller volumes
• Climate consideration: Panels should not be exposed to extreme temperature or humidity during transit
Insurance covering the full invoice value is strongly recommended. We provide detailed receiving and acclimatization instructions for the panels to stabilize on-site before installation.

A: Fabrication: Panels can be cut and drilled using standard woodworking CNC equipment with fine-tooth carbide blades to prevent veneer chipping. Edge banding with matching real wood veneer tape or solid wood lipping is recommended.
Installation methods:
• Wall cladding: Direct adhesive bond to level substrate, or screw-fixed to aluminum/wooden sub-frame. Use color-matched wood plugs or aluminum trim to conceal fixings.
• Furniture: Integrated into cabinet carcasses using standard joinery techniques. Pre-drill for hinge and handle fittings.
• Partition walls: Framed installation with aluminum or wood frame profiles.
• Ceiling panels: Lightweight panels ideal for suspended ceiling features - use mechanical fixing with discreet trim.
Acclimatization: Allow panels to acclimate in the installation environment for 48–72 hours before fabrication to stabilize to local humidity conditions.
Maintenance: Dust regularly with a soft dry cloth. For UV lacquer finishes, occasional wiping with a slightly damp cloth is safe. Avoid harsh chemicals, abrasives, and prolonged direct sunlight exposure. Natural wood will develop a patina over time - this is a characteristic of genuine wood, not a defect.