Product Overview
The Truck Body Sandwich Panel is a high-performance composite panel engineered specifically for commercial vehicle body construction. It features a lightweight structural core - PP (polypropylene) honeycomb, aluminum honeycomb, XPS foam, or PU (polyurethane) foam - bonded between two durable face skins made of FRP (fiberglass-reinforced plastic), CFRT (continuous fiber-reinforced thermoplastic), aluminum alloy, or prepainted galvanized steel. The sandwich construction delivers an optimal combination of high rigidity, low weight, thermal insulation, and all-weather durability.
These panels are the industry standard for dry freight truck bodies, refrigerated vans, semi-trailer sidewalls, RV panels, and specialty vehicle bodies. By replacing traditional steel or solid FRP panels, they reduce vehicle tare weight by 50–70%, directly increasing payload capacity, reducing fuel consumption, and improving vehicle dynamics.
Key Features & Advantages
- Significant weight reduction: 6–8 kg/m² at 20 mm (FRP+PP honeycomb) - 50–70% lighter than steel or solid FRP.
- Increased payload & fuel savings: every 100 kg saved directly translates to more cargo capacity.
- High rigidity & flatness: sandwich structure provides superior bending stiffness; minimal deflection under load.
- Thermal insulation: cellular core provides natural thermal resistance - U-value as low as 0.3 W/m²·K (PU foam).
- Corrosion & weather resistant: FRP/CFRT/aluminum skins are immune to rust - lifetime durability without repainting.
- Impact & vibration resistant: composite panels absorb road vibration and resist minor impacts without denting.
- Fast assembly: large-format panels up to 12 m single piece reduce joint count and accelerate body production.
- Fully customizable: core type, skin material, thickness, color, panel dimensions - all specifiable.
- Eco-friendly: PP honeycomb and CFRT panels are fully recyclable; zero VOCs during production.
Technical Specifications
|
Parameter |
Specification |
|
Panel Width |
Up to 3,200 mm |
|
Panel Length |
Up to 12,000 mm |
|
Standard Sheet Sizes |
1220×2440, 1220×3050, 1500×3000 mm (cut-to-size available) |
|
Total Thickness |
10, 15, 20, 25, 30, 40, 50, 75, 100 mm |
|
Core - PP Honeycomb |
Density 60–160 kg/m³, cell 8–12 mm - best for dry freight, lightweight structural |
|
Core - Aluminum Honeycomb |
Density 40–80 kg/m³, cell 6–10 mm - premium rigidity, fire resistance |
|
Core - XPS Foam |
Density 35–50 kg/m³ - economical thermal insulation for reefer panels |
|
Core - PU Foam |
Density 40–60 kg/m³ - excellent insulation (K-value ~0.022 W/m·K) for refrigerated trucks |
|
Skin - FRP (Fiberglass) |
0.7–3.0 mm - high-gloss/matte, corrosion-proof, UV-resistant, most popular |
|
Skin - CFRT |
0.5–2.0 mm - fully thermoplastic, recyclable, excellent impact resistance |
|
Skin - Aluminum (3003/5052) |
0.5–2.0 mm - metallic finish, high rigidity |
|
Skin - Prepainted Galvanized Steel |
0.3–0.8 mm - cost-effective, high strength, wide RAL colors |
|
Skin - Stainless Steel |
0.4–0.8 mm - food-grade, highly corrosive environments |
|
Panel Weight (20 mm, FRP+PP honeycomb) |
6–8 kg/m² |
|
Fire Rating (Alum. skin + Alum. core) |
Class A (non-combustible) |
|
Fire Rating (FRP + FR-PP core) |
Class B1 (flame-retardant) per GB 8624 |
|
Service Temperature |
-40°C to +100°C (PP core); -60°C to +80°C (PU core) |
Skin & Core Combination Selector
|
Application |
Skin |
Core |
Key Benefit |
|
Dry Freight Box Truck |
FRP (1.5 mm) |
PP Honeycomb (80 kg/m³, 20 mm) |
Best weight/cost/rigidity balance |
|
Premium Dry Freight |
Aluminum (1.0 mm) |
PP Honeycomb (80 kg/m³) |
Metallic finish + higher rigidity |
|
Recyclable Truck Body |
CFRT (1.0 mm) |
PP Honeycomb (80 kg/m³) |
100% thermoplastic - fully recyclable |
|
Economy Dry Freight |
Prepainted Steel (0.5 mm) |
PP Honeycomb (80 kg/m³) |
Lowest cost, strong, wide color choice |
|
Refrigerated Truck |
FRP (1.5–2.0 mm) |
PU Foam (50 mm) |
Best insulation - U-value ~0.3 W/m²·K |
|
Economy Reefer |
FRP (1.5 mm) |
XPS Foam (50 mm) |
Good insulation, lower cost |
|
High-Fire-Risk Vehicle |
Aluminum (1.0 mm) |
Alum. Honeycomb (20 mm) |
Class A fire - non-combustible |
|
Food-Grade Body |
Stainless Steel (0.6 mm) |
PP Honeycomb (80 kg/m³) |
Hygienic, corrosion-proof, easy clean |
|
Floor Panel |
FRP Anti-Slip (2.0 mm) |
PP Honeycomb (80 kg/m³) |
Textured grip surface + high compressive strength |
Applications
Dry Freight / Box Trucks: sidewalls, front wall, roof, rear door panels.
Refrigerated Trucks (Reefers): insulated walls, floor, ceiling - PU/XPS core thermal barrier.
Van Trailers & Semi-Trailers: large-format side/roof panels up to 12 m - fewer joints, better sealing.
Light Commercial Vehicles: delivery vans, mobile workshops, food trucks.
RV & Caravan: body panels, floor panels, furniture - lightweight for fuel economy.
Special-Purpose Vehicles: mobile medical units, command vehicles, broadcast vans.
Container Bodies: shipping container modifications, portable storage units.
Bus & Rail: interior partition walls, luggage compartment panels, ceiling panels.




Assembly Guide
Joining: PU or epoxy structural adhesive creates continuous waterproof joints stronger than the panel. Supplement with stainless steel/aluminum rivets or Huck bolts at high-stress points.
Extrusions: internal corner profiles, edge profiles, and joint covers for clean finish and edge protection.
Assembly sequence: 1) Mount floor to chassis → 2) Bond side & front walls to floor and corners → 3) Bond roof to side wall top rails → 4) Install rear frame & pre-assembled doors → 5) Seal all external joints with PU sealant for watertight finish.
Packaging & Shipping
Panels stacked face-to-face with interleaving PE foam/corrugated sheets, secured on fumigated ISPM-15 heavy-duty pallets or steel stillage frames with corner protectors and weatherproof stretch film. Panels >6 m require open-top or extendable trailers; 40HQ container for standard sizes. MOQ: 50–100 sheets standard; 100–300 custom core/skin. Kits: 5–10 complete truck bodies. Lead time: 7–10 days stock; 10–15 days custom combo; 15–25 days large format/specialty; 20–30 days full kits. FCL / LCL sea freight (FOB/CIF).
Truck Body Sandwich Panel FAQ
Q: 1. What is a Truck Body Sandwich Panel?
A: A Truck Body Sandwich Panel is a high-performance composite panel engineered for commercial vehicle body construction. It features a lightweight structural core - such as PP (polypropylene) honeycomb, aluminum honeycomb, XPS foam, or PU (polyurethane) foam - bonded between two durable face skins made of FRP (fiberglass-reinforced plastic), CFRT (continuous fiber-reinforced thermoplastic), aluminum, or prepainted galvanized steel. The sandwich construction delivers an optimal combination of high rigidity, low weight, thermal insulation, and weather resistance, making it the preferred material for dry freight truck bodies, refrigerated vans, trailer sidewalls, and RV panels.
Q: 2. What are the standard specifications?
A: Common specifications:
Panel dimensions:
• Width: up to 3,200 mm (3.2 m)
• Length: up to 12,000 mm (12 m)
• Standard sheet sizes: 1220 × 2440 mm, 1220 × 3050 mm, 1500 × 3000 mm (cut-to-size available)
Core types:
• PP Honeycomb: density 60–160 kg/m³, cell size 8–12 mm - best for dry freight, lightweight and strong.
• Aluminum Honeycomb: density 40–80 kg/m³, cell size 6–10 mm - premium rigidity and fire resistance.
• XPS Foam: density 35–50 kg/m³ - economical thermal insulation for reefer panels.
• PU (Polyurethane) Foam: density 40–60 kg/m³ - excellent insulation, used in refrigerated truck bodies.
Skin / face materials:
• FRP (Fiberglass): 0.7–3.0 mm - high-gloss or matte, corrosion-proof, UV-resistant.
• CFRT: 0.5–2.0 mm - thermoplastic composite, fully recyclable, excellent impact resistance.
• Aluminum (3003 / 5052): 0.5–2.0 mm - metallic finish, high rigidity.
• Prepainted Galvanized Steel: 0.3–0.8 mm - cost-effective, high strength, various RAL colors.
• Stainless Steel: 0.4–0.8 mm - for food-grade or highly corrosive environments.
Total panel thickness: 10 mm, 15 mm, 20 mm, 25 mm, 30 mm, 40 mm, 50 mm, 75 mm, 100 mm
Panel weight (typical, 20 mm, FRP + PP honeycomb): 6–8 kg/m²
Q: 3. What is the minimum order quantity (MOQ)?
A: The typical MOQ is 50–100 sheets for standard 1220 × 2440 mm panels with FRP skins and PP honeycomb core (20 mm total thickness). Custom core types, specialty skins (CFRT / stainless steel), non-standard thicknesses, or panels exceeding 3 m in length may require a higher MOQ of 100–300 sheets. Full truck body kit orders (pre-cut panels for a specific vehicle model) have an MOQ of 5–10 complete kits. Sample panels (A4 or 300 × 300 mm) are available for evaluation. Contact us with your vehicle specifications for an accurate quotation and panel optimization.
Q: 4. Where are Truck Body Sandwich Panels used?
A: Common applications:
• Dry Freight / Box Trucks: sidewalls, front wall, roof, rear door panels - lightweight panel reduces vehicle tare weight and increases payload.
• Refrigerated Trucks (Reefers): insulated walls, floor, ceiling - PU / XPS core provides thermal barrier for temperature-controlled transport.
• Van Trailers & Semi-Trailers: large-format side and roof panels up to 12 m - fewer joints, faster assembly, better thermal performance.
• Light Commercial Vehicles: small delivery vans, mobile workshops, food trucks - custom panel kits for compact bodies.
• RV & Caravan: body panels, floor panels, furniture panels - lightweight for better fuel economy and driving dynamics.
• Special-Purpose Vehicles: mobile medical units, command vehicles, broadcast vans, mobile laboratories - clean, hygienic, and easy-to-modify panel systems.
• Container Bodies: shipping container modifications, portable storage units - corrosion-resistant panels for maritime environments.
• Bus & Rail: interior partition walls, luggage compartment panels, ceiling panels.
Q: 5. What are the advantages of Truck Body Sandwich Panels over traditional truck body materials?
A: ① Significant Weight Reduction: PP honeycomb panels weigh 6–8 kg/m² at 20 mm thickness - 50–70% lighter than equivalent steel or solid FRP panels. Every 100 kg saved increases payload and reduces fuel consumption.
② High Rigidity & Flatness: the sandwich structure provides superior bending stiffness - panels resist deflection under load without additional framing.
③ Thermal Insulation: cellular core materials (honeycomb / foam) provide natural thermal resistance - U-value as low as 0.3 W/m²·K for PU foam core, reducing refrigeration energy costs.
④ Corrosion & Weather Resistant: FRP, CFRT, and aluminum skins are immune to rust - no repainting or anti-corrosion maintenance over the vehicle lifetime.
⑤ Impact & Vibration Resistant: composite panels absorb road vibration and resist minor impacts without denting - unlike thin-gauge steel sheets.
⑥ Fast Assembly: large-format panels (up to 12 m single piece) reduce the number of joints - accelerates truck body production and improves thermal/weather sealing.
⑦ Customizable: core type, skin material, thickness, color, and panel dimensions can all be specified to match the vehicle design and performance requirements.
⑧ Eco-Friendly: PP honeycomb and CFRT panels are fully recyclable; zero VOCs during production.
Q: 6. What skin and core combinations are available?
A: Dry Freight (non-insulated):
• FRP + PP Honeycomb + FRP: most popular - lightweight, cost-effective, good rigidity.
• Aluminum + PP Honeycomb + Aluminum: high-end metallic appearance, premium rigidity.
• CFRT + PP Honeycomb + CFRT: fully thermoplastic, recyclable, excellent impact resistance.
• Prepainted Steel + PP Honeycomb + Prepainted Steel: economical, strong, wide color choice.
Refrigerated / Insulated:
• FRP + PU Foam + FRP: excellent insulation (K-value ~0.022 W/m·K), standard for reefer panels.
• FRP + XPS Foam + FRP: good insulation, lower cost, moisture-resistant.
• Aluminum + PU Foam + Aluminum: for premium reefer bodies with metallic finish.
Specialized:
• FRP + Aluminum Honeycomb + FRP: highest rigidity and fire resistance - for high-performance applications.
• Stainless Steel + PP Honeycomb + Stainless Steel: for food-grade and corrosive environments.
• Anti-Slip Floor Panels: FRP top skin with textured anti-slip pattern, PP honeycomb core - for truck floors.
Q: 7. What is the fire rating of Truck Body Sandwich Panels?
A: Fire performance depends on the skin and core combination:
• FRP + PP Honeycomb (Standard): the FRP skin typically meets Class B2 / B1 with flame-retardant additives; PP core with FR grade achieves UL 94 V-0.
• Aluminum + PP Honeycomb (FR Grade): aluminum skins (non-combustible) + FR-grade PP core - overall panel achieves Class B1 per GB 8624.
• Aluminum + Aluminum Honeycomb: all-metal construction - Class A (non-combustible) core and skins.
• FRP + PU Foam: PU foam with flame-retardant formulation meets Class B2; upgraded B1 available for specific applications.
For vehicles operating in regions with stringent fire regulations (e.g., EU / Middle East), we recommend aluminum-skinned panels with FR-grade or aluminum honeycomb cores. Fire test certificates (SGS / TÜV / EN 45545 for rail) are available for certified combinations. Please specify your target fire standard at the inquiry stage.
Q: 8. What is the typical production lead time?
A: • Standard stock panels (FRP + PP honeycomb, 20 mm, 1220 × 2440 mm): 7–10 working days
• Standard combination, custom thickness or color: 10–15 working days
• Custom skin/core combination (e.g., CFRT, stainless steel): 15–20 working days
• Large-format panels (> 3 m) or specialized cores (PU foam, aluminum honeycomb): 15–25 working days
• Full truck body kits (pre-cut to vehicle specifications): 20–30 working days (including CAD review and nesting)
Lead times depend on material availability, panel complexity, and order volume. For prototype builds and time-sensitive projects, we offer expedited production slots. Contact our sales team with your vehicle drawings for a confirmed schedule.
Q: 9. How are Truck Body Sandwich Panels packaged and shipped?
A: Packaging: Panels are stacked face-to-face with interleaving PE foam or corrugated cardboard sheets to protect surface finishes. The stack is secured on fumigated (ISPM-15 compliant) heavy-duty wooden pallets or steel stillage frames. Corner protectors and edge guards prevent transit damage. The entire pallet is wrapped in weatherproof stretch film. Each pallet is labeled with panel specifications, core type, skin material, thickness, quantity, and batch number.
Shipping:
• Domestic: flatbed truck or dedicated logistics with palletized delivery. For panels > 6 m, open-top or extendable trailers are used.
• International: FCL sea freight - 40HQ container recommended for standard panels (up to 12 m panels require open-top or flat-rack containers). LCL available for trial orders. Standard terms: FOB / CIF / CNF.
Storage: store flat in a dry, covered area. Protect FRP and painted surfaces from direct sunlight during long-term outdoor storage.
Q: 10. How are Truck Body Sandwich Panels cut, joined, and assembled?
A: Cutting:
• CNC Router: recommended for precise panel cutting and edge profiling - use diamond or carbide tooling.
• Panel Saw: carbide-tipped blade (80–100 teeth) at moderate feed rate for straight cuts.
• Water Jet: for complex cutouts (windows, vents, access hatches) without heat or dust.
Joining Methods:
• Adhesive Bonding: two-component PU or epoxy structural adhesive - creates a continuous, waterproof joint stronger than the panel itself. Most common for truck body assembly.
• Mechanical Fastening: stainless steel or aluminum rivets / Huck bolts combined with adhesive - for high-stress joints and removable panels.
• Aluminum Extrusion Profiles: internal corner profiles, edge profiles, and joint covers - provide a clean finish and protect panel edges.
Assembly Process (typical dry freight body):
1. Floor: mount the floor panel onto the chassis subframe with adhesive and fasteners.
2. Side walls & front wall: bond panels to floor and corner extrusions; secure with temporary clamps until adhesive cures.
3. Roof: bond roof panel to side wall top rails; ensure weather seal at all joints.
4. Rear frame & doors: install rear door frame; hang pre-assembled sandwich panel doors.
5. Sealing: apply PU sealant to all external joints and fastener heads for a watertight finish.
We provide complete assembly manuals, adhesive recommendations, extrusion profiles, and on-site technical support for body builders.
Hot Tags: truck body sandwich panel, China truck body sandwich panel manufacturers, suppliers, factory, Decorative PU Sandwich Panel, Fibreglass Foam Sandwich Panel, Foam Filled Honeycomb Panel, Foam Sandwich Panel, Plastic Sandwich Panel, Sandwich Panel Cladding





