Product Parameter Table
|
Brand |
CHAOEN |
|
Product Name |
Aluminium Honeycomb Impact-Resistant Interior Wall Panel |
|
Product Type |
Heavy-Duty Sandwich Wall Panel for High-Traffic Interiors |
|
Panel Thickness |
7 / 8 / 9 mm |
|
Panel Width |
1220 mm (Custom Width Available) |
|
Panel Length |
Up to 4000 mm, Cut to Project Dimensions |
|
Skin |
0.5 mm Aluminium Alloy - Both Faces |
|
Honeycomb Core |
Aluminium Foil Hexagonal Honeycomb, Cell Size 6 mm |
|
Panel Weight |
Approx. 4.5-5.5 KG / Square Meter |
|
Surface |
Wear-Resistant Wood Grain, Stone & Solid Colour Finish |
|
Impact Resistance |
Steel Ball Impact Test, No Dent or Crack (Test Report on Request) |
|
Surface Hardness |
Scratch-Resistant Wear Layer (Test Report on Request) |
|
Fire Rating |
A2 Class Non-Combustible |
|
Formaldehyde Emission |
Zero |
|
Moisture Behaviour |
All-Aluminium Build, Does Not Absorb Moisture or Warp |
|
Installation |
Concealed Mounting Clip, Hook-On Dry Installation |
|
Application |
Airport Terminal, Shopping Mall, Hospital Corridor, Office Lobby, Metro Station |
|
Use |
High-traffic interior wall cladding where surfaces take trolley, luggage and daily knock damage |
|
MOQ |
500 Square Meter / Each Colour or Finish |
|
Sample |
Free Sample Available |
|
Payment |
T/T, L/C, Western Union, Trade Assurance |
|
Packing |
Protective Film + Edge Protection + Carton + Wooden Crate |
|
Certification |
CE / ROHS |
Product Introduction
CHAOEN Impact-Resistant Interior Wall Panel is built for the walls that get hit. Two coated aluminium skins are bonded to a hexagonal aluminium honeycomb core, so the panel absorbs trolley knocks, luggage strikes and daily contact without denting, cracking or leaving a permanent mark - the failure mode that forces early refurbishment on gypsum, MDF and thin composite wall linings.
The wear-resistant coated face keeps its finish under constant cleaning and contact, while the all-aluminium build means zero formaldehyde, no moisture absorption and A2 non-combustible performance. Panels are cut to project dimensions and hooked onto concealed mounting clips, so a damaged panel can be lifted off and replaced without disturbing the wall around it.
Detailed Description
Built to take knocks. The honeycomb core spreads impact energy across the panel instead of concentrating it at the strike point, so a steel ball impact leaves the face intact - no dent, no crack, no spider-web damage under the finish.
A surface that still looks new after years. The wear-resistant coated face resists scratching from trolleys, cleaning equipment and passing luggage, and wipes clean without polishing or touch-up painting.
Long service life, lower lifetime cost. High-traffic corridors normally need wall repairs every few years. An aluminium honeycomb wall keeps its appearance far longer, so the refurbishment cycle is driven by design changes rather than damage.
Zero formaldehyde and A2 non-combustible. There is no timber or particle board in the panel, so it adds no formaldehyde and no fire load to public interiors where air quality and fire codes are specified.
Damaged panel? Swap it, not the wall. Concealed clip mounting means a single panel can be unhooked and replaced on site, keeping repair time and cost minimal in airports, malls and hospitals.
Cut to your drawings. Panels are produced to project dimensions with matching trims, so installers fix them directly with hairline joints and no on-site cutting waste inside a finished space.
FAQ
Q1: How impact-resistant is the panel?
A1: The panel is validated by steel ball impact testing with no dent or crack on the face. The full impact and hardness test report is available on request.
Q2: What thicknesses and sizes are available?
A2: Thickness 7, 8 and 9 mm; standard width 1220 mm with lengths up to 4000 mm, cut to your project dimensions.
Q3: How are the panels installed?
A3: Panels hook onto concealed mounting clips fixed to the wall - a dry installation with hairline joints and no exposed fixings.
Q4: Can a single damaged panel be replaced?
A4: Yes. Because panels hook onto clips, one panel can be lifted off and replaced without removing the surrounding wall.
Q5: Is the surface easy to clean?
A5: Yes. The wear-resistant coated face wipes clean with normal cleaning agents and resists scratching from trolleys and cleaning equipment.
Q6: What is the fire rating?
A6: The panel is A2 class non-combustible with zero formaldehyde emission, suitable for public and commercial interiors.
Q7: What finishes can you supply?
A7: Wear-resistant wood grain, stone and solid colour finishes, with custom colours matched to RAL, Pantone or NCS references.
Q8: What is the MOQ and lead time?
A8: MOQ is 500 square meters per colour or finish. Lead time is confirmed at order and free samples are supplied before order.
Hot Tags: impact-resistant aluminium honeycomb interior wall panel-chaoen, China impact-resistant aluminium honeycomb interior wall panel-chaoen manufacturers, suppliers, factory, Aluminium Honeycomb Roof Panel, Aluminium Honeycomb Sandwich Panel, aluminum core honeycomb panel 5052 aluminum core, Aluminum Honeycomb Plate, Honeycomb Aluminium Sheet, Mortise Tenon Joints Honeycomb Panel
