Product Parameter Table
|
Product Name |
Aluminum Honeycomb Panel (Antibacterial Medical & Lab Series) |
|
Brand |
CHAOEN |
|
Material |
Aluminum Alloy 3003/5052 Face + Hexagonal Aluminum Honeycomb Core + Aluminum Back Sheet |
|
Core Structure |
Hexagonal Aluminum Foil Honeycomb, vertically oriented cells, 6 mm cell size |
|
Total Thickness |
18 mm (14-20 mm Available) |
|
Weight |
Approx. 5.5 KG/Square Meter |
|
Fire Resistant Level |
Class A2 (Non-Combustible Aluminum Honeycomb Core) |
|
Temperature Resistance |
-50 C to 120 C |
|
Water Absorption |
0% - Fully Waterproof, No Swelling |
|
Impact Resistance |
Excellent, No Cracking or Delamination |
|
Formaldehyde Emission |
Zero Emission - 100% Inorganic Aluminum Construction |
|
Surface Treatment |
Antibacterial Coating, Non-Porous |
|
Disinfectant Resistance |
Alcohol and Chlorine Wipe Compatible |
|
Hygiene Property |
No Porosity, No Organic Substrate |
|
Use |
Hospital ward wall cladding, bedside and nurse station casework, operating suite panels, laboratory casework, cleanroom linings, clinic and dental fit-outs, pharmacy interiors |
|
Standard Size |
1220 x 2440 mm (Custom up to 1500 x 4000 mm) |
|
MOQ |
500 Square Meter / Each Colour or Finish |
|
Sample |
Free Sample Available |
|
Payment |
T/T, L/C, Western Union, Trade Assurance |
|
Packing |
Pallet + Corrugated Carton with Corner Protectors, PE Foam Interlayer |
|
Certification |
CE / ROHS |
Product Introduction
CHAOEN Aluminum Honeycomb Panel (Antibacterial Medical & Lab Series) is built for interiors that are disinfected every single day. The 18 mm all-aluminium panel has a non-porous antibacterial coated surface that tolerates alcohol and chlorine wipe-down cycles without clouding, discolouring or lifting, and an impact-resistant honeycomb core that survives trolley and bed-frame knocks in busy corridors.
Detailed Description
Disinfection is a daily event, not an occasional one. Laminate and painted board degrade under repeated alcohol and chlorine cleaning, showing clouding and edge lift within a few years. The coated aluminium face on this panel is chemically stable against routine clinical disinfectants, so the surface still looks specified after years of service.
Non-porous with no organic substrate. There is no wood fibre, paper or resin core for moisture or contamination to enter. The antibacterial coating is applied to a surface that has no porosity to begin with, which is a fundamentally different starting point from coated timber board.
Impact resistance where trolleys travel. The hexagonal honeycomb core distributes impact energy across the panel instead of concentrating it, so bed frames, trolleys and equipment carts do not leave the punctures and crushed corners common on hollow-core and timber cladding.
Fire safety and specification flexibility. Class A2 non-combustible with zero formaldehyde emission, available in a calm healthcare palette of whites, greys, cyans, mint and pale wood grains, cut to size with matching trims for wards, laboratories and cleanrooms.



FAQ
Q1: What antibacterial performance can you demonstrate?
A1: The face carries an antibacterial coating and we supply the current test report on request. We do not quote a fixed reduction percentage here because the figure depends on the test standard and organism specified for your project.
Q2: Which disinfectants can be used on the surface?
A2: Routine alcohol-based and chlorine-based clinical disinfectants are compatible with the coated aluminium face. Please advise if your protocol uses hydrogen peroxide vapour so we can confirm the coating specification.
Q3: Will repeated disinfection dull or cloud the surface?
A3: No. The coating is cured to the aluminium face and is chemically stable against routine clinical cleaning agents, unlike laminate and painted board which cloud and lift at the edges over time.
Q4: How does it handle trolley and bed impacts?
A4: The honeycomb core spreads impact energy across the panel rather than concentrating it at the point of contact, which resists the punctures and crushed corners seen on hollow-core cladding.
Q5: Is it suitable for cleanrooms?
A5: Yes. The surface is non-porous with no organic substrate and can be supplied with flush joint details and matching trims for cleanroom and operating suite linings.
Q6: Does it emit formaldehyde or VOCs?
A6: No. The construction is 100% inorganic aluminium with zero formaldehyde emission, which matters in wards and enclosed clinical spaces.
Q7: What thickness is used for wall cladding versus casework?
A7: Wall and ceiling cladding is typically 7-9 mm, casework and doors 18 mm, and full door leaves 38-48 mm. We will advise based on your drawings.
Q8: What is the MOQ?
A8: 500 square meters per colour or finish, with free samples so your infection control team can trial the disinfection protocol before ordering.
Hot Tags: high quality antibacterial aluminum honeycomb panel for medical & lab, China high quality antibacterial aluminum honeycomb panel for medical & lab manufacturers, suppliers, factory, Aluminium Honeycomb Composite Panel, Aluminium Honeycomb Roof Panel, aluminum core honeycomb panel face 0 8mm aluminum, Aluminum Honeycomb Core Panel, aluminum honeycomb panel weight 3 kg m2, Honeycomb Core Panel






