Product Overview
The All-Aluminum Perforated Acoustic Panel is a sound-absorbing panel made from aluminum sheet (0.8-2.0 mm, 3003-H14 or 5052-H32) precision-perforated with engineered holes (typically 0.8-3.0 mm diameter, 1-30% open area), backed with black acoustic fleece (non-woven polyester, 0.2-0.5 mm) or mineral wool inlay (25-50 mm, 30-80 kg/m3), and optionally bonded to an aluminum honeycomb core for structural rigidity. The perforated face, fleece, and air cavity behind the panel form a Helmholtz resonator array that converts sound energy into heat through viscous friction in the small holes. By tuning hole diameter, open area, panel thickness, and cavity depth, the absorption peak can be precisely positioned for low-frequency rumble (125-250 Hz), speech-range noise (500-2000 Hz), or high-frequency hiss (2000-4000 Hz). The all-aluminum construction is Class A fire-rated, 100% waterproof, fiber-shedding-free (cleanroom-compatible), and fully washable. These panels achieve NRC 0.45-0.95 and are the only acoustic panel that simultaneously delivers fire safety, waterproofing, cleanability, and durability for demanding environments: swimming pools, metro stations, hospital operating theaters, commercial kitchens, engine test cells, and architectural ceiling/wall systems.
Key Features & Advantages
- Class A Fire-Rated Acoustic Performance: 100% non-combustible aluminum - GB 8624 Class A, EN 13501-1 A1. The only acoustic panel achieving Class A fire rating without compromising sound absorption. Mandatory for public buildings, transport hubs, and high-rise.
- 100% Waterproof and Humidity-Proof: Acoustic fleece can get wet and dry without degradation (unlike mineral wool which collapses). Panel survives swimming pools, bathrooms, outdoor canopies, and tropical climates where conventional acoustics fail.
- Zero Fiber Shedding - Cleanroom Compatible: Unlike mineral wool and fiberglass panels that continuously shed fibers, aluminum perforated panels with acoustic fleece have zero fiber release. Approved for cleanrooms, hospitals, food processing, and electronics.
- Washable and Sterilizable: The aluminum surface can be washed, scrubbed, and chemically disinfected. Essential for hospital ORs, commercial kitchens, and pharma facilities. Porous acoustic materials (foam, fabric, mineral wool) cannot be wet-cleaned.
- Precise Acoustic Tuning: Unlike broadband porous absorbers that absorb all frequencies uniformly, Helmholtz resonator perforated panels can be tuned to specific frequencies. Target a 125 Hz machine hum or a 2000 Hz speech echo with surgical precision.
- Impact-Resistant and Durable: 0.8-2.0 mm aluminum faces withstand ball impacts (gymnasiums), luggage knocks (transport hubs), and equipment strikes (industrial plants). Fabric and foam panels tear easily.
- Aesthetic Integration: Perforation becomes a design feature - micro-perforation creates a smooth matte texture; macro-perforation creates visible decorative patterns. Colors, wood-grain, and anodized finishes integrate with architecture.
- Integrated Functions: One panel combines acoustics plus fire rating plus waterproofing plus impact resistance plus cleanability. No need to layer separate materials with conflicting properties.
- Antimicrobial Options: Anti-bacterial powder coating or anodizing on the perforated face for healthcare and food environments.
- NRC 0.45-0.95 Configurable: From basic Helmholtz resonator to double-layer micro-perforated broadband absorber. Full acoustic design and simulation support.
Technical Specifications
|
Parameter |
Specification |
|
Face Skin Alloy |
3003-H14 (standard) or 5052-H32 (marine/corrosion) |
|
Face Skin Thickness |
0.8, 1.0, 1.2, 1.5, 2.0 mm |
|
Perforation Hole Diameter |
0.8, 1.0, 1.5, 2.0, 2.5, 3.0 mm (micro: 1.0 mm or less; macro: above 1.0 mm) |
|
Hole Pattern |
Staggered 60 deg pitch (max open area), straight 90 deg, or custom |
|
Perforation Open Area |
1-5% (micro/tuning), 10-23% (standard acoustic), 25-40% (high transparency) |
|
Hole Pitch (center-to-center) |
2-5x hole diameter |
|
Panel Total Thickness |
10, 12, 15, 20, 25, 30, 40, 50 mm |
|
Back Skin |
Solid aluminum (Helmholtz resonator), micro-perforated (double-layer broadband), or open (fleece only) |
|
Internal Core |
Aluminum honeycomb (3003-H18, 6.4/8.0 mm cell) at edges/full - or air cavity |
|
Acoustic Backing |
Black non-woven acoustic fleece (0.2-0.5 mm); mineral wool/glass wool inlay (25-50 mm, 30-80 kg/m3) |
|
Air Cavity Depth |
Determines Helmholtz resonance frequency - typically 50-300 mm |
|
Standard Panel Sizes |
Ceiling: 600x600, 600x1200, 300x1200 mm; Wall: 600x1200, 600x2400, 1200x2400 mm; custom |
|
NRC (Noise Reduction Coefficient) |
0.45-0.95 depending on configuration |
|
Sound Absorption Class (ISO 11654) |
Class C (NRC 0.40-0.55) to Class A (NRC 0.90-1.00) |
|
Surface Finishes |
Powder coating (60-120 um), PVDF (25-40 um), anodizing (10-25 um), wood-grain transfer |
|
Fire Rating |
Class A (GB 8624); A1 (EN 13501-1); ASTM E84 Class A; BS 476 Class 0 |
|
Special Coatings |
Anti-bacterial (silver-ion), anti-fingerprint, anti-graffiti |
Acoustic Configuration Guide
|
Configuration |
Mechanism |
NRC Range |
Cleanability |
Application |
|
Perforated Face + Fleece + Air Cavity |
Perforations + fleece (high-freq) + cavity (low-freq resonator) |
0.55-0.85 |
Good - fleece protected behind metal |
Standard architectural - most common |
|
Perforated Face + Mineral Wool + Solid Back |
Perforations + broadband mineral wool absorption |
0.75-0.95 |
Limited - mineral wool hidden but present |
Industrial, transport - maximum absorption |
|
Micro-Perforated Face + Air Cavity + Solid Back |
Pure Helmholtz resonator - no fleece, no wool |
0.45-0.75 |
Excellent - 100% metal, aggressive wash |
Food/pharma/healthcare - ultimate cleanable |
|
Double-Layer Micro-Perforated (ML-MPP) |
Two micro-perforated sheets + air gaps |
0.65-0.85 |
Excellent - 100% metal throughout |
Premium broadband - advanced acoustic engineering |
|
Perforated Face + Fleece + Honeycomb Core |
Honeycomb cells = individual Helmholtz resonators |
0.60-0.85 |
Good - rigid structural panel |
Architectural where panel is structural element |
Perforation Pattern Design Options
|
Pattern Type |
Hole Shape |
Visual Effect |
Acoustic Note |
|
Round - Staggered (60 deg) |
Round 1.0-3.0 mm |
Clean, professional - maximum open area |
Most common - efficient acoustic performance |
|
Round - Straight (90 deg) |
Round 1.0-3.0 mm |
Grid-like, ordered appearance |
Slightly less open area than staggered |
|
Square Holes |
Square 2-5 mm |
Modern linear grid aesthetic |
Good - directional visual interest |
|
Slotted |
Linear slots 2-5x50-100 mm |
Directional visual flow |
Good - can align with architecture lines |
|
Micro-Perforation |
Round 0.8-1.0 mm, pitch 2-3 mm |
Nearly invisible from 2+ m - smooth matte |
Precision Helmholtz tuning |
|
Graduated/Gradient |
Hole size/density varies across panel |
Dynamic visual movement - artistic |
Creates acoustic zoning across surface |
|
Custom Image/Logo |
CNC-drilled pattern forms image/text |
Branding meets acoustics |
Per design - custom CNC programming |
|
Combined Solid + Perforated |
Solid border + perforated field |
Defined visual boundary |
Slightly reduced effective absorption area |
Applications
Auditoriums and concert halls: acoustic wall and ceiling treatment. Conference rooms and boardrooms: speech-intelligibility optimized panels. Open-plan offices: acoustic ceiling clouds and wall absorbers. Metro, railway, and bus stations: large-format Class A fire-rated acoustic panels. Road and rail noise barriers: exterior PVDF-coated acoustic panels. Industrial plant noise control: machine enclosures, acoustic screens, ceiling baffles. Engine test cells and dynamometer rooms: high-temperature acoustic panels. HVAC duct silencers and plenum liners: zero fiber erosion into airstream. Gymnasiums and sports halls: impact-resistant acoustic wall panels. Swimming pools and natatoriums: 100% waterproof acoustic ceilings. Recording studios and broadcast facilities. Cleanrooms and laboratories: non-shedding, chemically-resistant panels.




Processing & Packaging
Acoustic fleece is factory-applied to the back of the perforated face - do not remove, puncture, or compress. Cavity depth behind panel is critical for low-frequency absorption - maintain specified depth consistently (plus/minus 10 mm tolerance). For Helmholtz resonators, seal panel-to-panel joints and perimeter with acoustic sealant or butyl tape for maximum low-frequency performance. Mineral wool (if specified) installed in cavity before panel mounting - ensure complete coverage, no gaps. Panel installation: same methods as non-acoustic panels - lay-in T-grid, clip-in, hook-on, Z-clips. PE protective film must stay on until after all construction cleaning - perforation holes trap dust. Remove film slowly at 180 deg angle. Vacuum gently if dust enters holes (never use compressed air which drives dust into fleece). Packaging: each panel face PE film protected, foam interlayers, corner protectors, heavy-duty cartons (10-20 per carton), palletized, crated for export. MOQ: 100-300 m2 standard; 200-500 m2 custom. Lead time: 15-20 days standard; 20-30 days custom perforation; 25-35 days micro-perforation. FCL sea freight (FOB/CIF). Store flat with PE film on.
All-Aluminum Perforated Acoustic Panel FAQ
Q: 1. What is an all-aluminum perforated acoustic panel?
A: An all-aluminum perforated acoustic panel is a sound-absorbing panel made from aluminum sheet perforated with precisely engineered holes (typically Φ0.8–3.0mm diameter, 1–30% open area) that is backed with acoustic fleece, mineral wool, or a Helmholtz resonator cavity to absorb sound energy across targeted frequency ranges. The panel face is aluminum (0.8–2.0mm thick), the core is typically aluminum honeycomb for structural rigidity, and the back skin is aluminum (solid or micro-perforated). When sound waves strike the perforated surface, the air in each hole acts as an acoustic mass and the air cavity behind acts as an acoustic spring, creating a Helmholtz resonator array that converts sound energy into heat through viscous friction in the small holes. By tuning the hole diameter, perforation percentage, panel thickness, and cavity depth, the absorption peak can be precisely positioned to target specific noise frequencies - low-frequency rumble (125–250 Hz), speech-range noise (500–2000 Hz), or high-frequency hiss (2000–4000 Hz). All-aluminum perforated acoustic panels are used in architectural acoustics, industrial noise control, transportation, and HVAC applications where fire safety, durability, cleanability, and acoustic performance must coexist.
Q: 2. What are the standard specifications?
A: Common specifications:
· Face skin: 0.8mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm aluminum sheet (3003-H14 or 5052-H32)
· Hole diameter: Φ0.8mm, Φ1.0mm, Φ1.5mm, Φ2.0mm, Φ2.5mm, Φ3.0mm, Φ5.0mm (micro-perforation: ≤1.0mm; macro-perforation: >1.0mm)
· Hole pattern: staggered (60° pitch, most common - maximum open area for given hole size), straight (90° pitch), or custom
· Perforation open area: 1–5% (micro-perforation, tuning-focused), 10–23% (standard acoustic), 25–40% (high-transparency, visual emphasis)
· Hole pitch (center-to-center): typically 2–5× hole diameter
· Panel total thickness: 10mm, 12mm, 15mm, 20mm, 25mm, 30mm, 40mm, 50mm
· Back skin: solid aluminum (for Helmholtz resonator), micro-perforated aluminum (for double-layer resonator - broadband absorption), or open (fleece-only)
· Honeycomb core: 3003-H18, 6.4mm or 8.0mm cell (typically only at panel edges or as a full stiffener - the acoustic cavity is usually air-filled, not honeycomb-filled)
· Acoustic backing:
- Black acoustic fleece (non-woven polyester, 0.2–0.5mm thick, NRC enhancement + visual blackout behind holes)
- Mineral wool / glass wool infill (25–50mm thick, 30–80 kg/m³ - adds broadband absorption)
- Air cavity (the depth behind the panel determines the Helmholtz resonance frequency)
· Standard panel sizes:
- Ceiling panels: 600×600mm, 600×1200mm, 300×1200mm, 300×1800mm
- Wall panels: 600×1200mm, 600×2400mm, 1200×2400mm, custom sizes
· NRC (Noise Reduction Coefficient): 0.45–0.95 depending on configuration
· Sound absorption class (ISO 11654): Class C (NRC 0.40–0.55) to Class A (NRC 0.90–1.00)
Q: 3. What is the minimum order quantity (MOQ)?
A: The typical MOQ is 100–300 square meters for standard hole diameters, pitch, and open-area combinations. For custom perforation patterns, unusual hole sizes, or specific acoustic tuning requirements, MOQ is typically 200–500 m². Acoustic sample panels (600×600mm) and acoustic test reports for standard configurations are available. Please provide your target noise frequency range, required NRC, panel size constraints, and fire rating requirements for an acoustic design recommendation and quotation.
Q: 4. Where are all-aluminum perforated acoustic panels used?
A: Common applications:
· Auditoriums and concert halls: wall and ceiling acoustic treatment - aluminum panels combine acoustic performance with elegant architectural appearance and fire safety compliance
· Conference rooms and boardrooms: speech-intelligibility optimized panels - perforation tuned to absorb voice frequencies (250–2000 Hz), reducing reverberation and echo
· Open-plan offices: ceiling acoustic clouds and wall absorbers - control the reverberant noise field for occupant comfort and productivity
· Metro, railway, and bus stations: large-format wall and ceiling panels - Class A fire-rated, impact-resistant, cleanable, acoustic - the only panel meeting all four requirements simultaneously for transport hubs
· Road and rail noise barriers: exterior acoustic panels along highways and rail lines - PVDF-coated aluminum with acoustic fleece, weather-resistant, NRC 0.70–0.90
· Industrial plant and factory noise control: machine enclosure panels, acoustic screens, ceiling baffles - durable, washable, oil-resistant surface in noisy manufacturing environments
· Engine test cells and dynamometer rooms: high-temperature acoustic panels - all-aluminum construction withstands exhaust heat and high-velocity airflow
· HVAC duct silencers and plenum liners: perforated aluminum facing for sound-attenuating duct liners - zero fiber erosion into the airstream (unlike exposed mineral wool)
· Gymnasiums and sports halls: impact-resistant acoustic wall panels - withstands ball impacts and equipment knocks
· Swimming pools and natatoriums: 100% waterproof acoustic ceiling and wall panels - the only acoustic panel that survives the pool environment (chlorine, 100% humidity, condensation)
· Recording studios and broadcast facilities: precision-tuned acoustic panels with broadband absorption
· Cleanrooms and laboratories: non-shedding, chemically-resistant acoustic panels - the standard mineral wool acoustic panel is banned in cleanrooms; aluminum is acceptable
Q: 5. What are the advantages over other acoustic materials?
A: ① Class A fire-rated acoustic performance: mineral wool and fiberglass acoustic panels rely on combustible binders (phenolic resin) to hold the fiber matrix together. In a fire, they can contribute fuel load and toxic smoke. All-aluminum perforated acoustic panels are 100% non-combustible - the only acoustic panel achieving Class A fire rating without compromising sound absorption. This is mandatory for public buildings, transport, and high-rise construction.
② Waterproof and humidity-proof: acoustic fleece behind the perforations can get wet and dry without degradation (unlike mineral wool, which collapses and loses acoustic performance when wet). The panel can be installed in swimming pools, bathrooms, outdoor canopies, and tropical climates - environments where conventional acoustic materials fail.
③ No fiber shedding - cleanroom compatible: mineral wool and fiberglass acoustic panels continuously shed microscopic fibers into the air over their service life - unacceptable in cleanrooms, hospitals, food processing, and electronics manufacturing. Aluminum perforated panels with acoustic fleece have zero fiber release into occupied spaces.
④ Washable and sterilizable: the aluminum surface can be washed, scrubbed, and chemically disinfected. This is essential for hospital operating theaters, commercial kitchens, and pharmaceutical facilities where hygiene is paramount. Porous acoustic materials (foam, fabric, mineral wool) cannot be wet-cleaned.
⑤ Impact-resistant and durable: 0.8–2.0mm aluminum faces withstand impacts from balls (gymnasiums), luggage (transport hubs), and equipment (industrial plants). Fabric-wrapped and foam acoustic panels are easily torn, punctured, and dented.
⑥ Precise acoustic tuning: unlike broadband porous absorbers (mineral wool, foam) that absorb all frequencies relatively uniformly, Helmholtz resonator perforated panels can be tuned to specific frequencies. An engineer can target a 125 Hz machinery hum or a 2000 Hz speech-range echo with surgical precision by adjusting hole size, open area, and cavity depth.
⑦ Aesthetic integration: perforated aluminum panels are an architectural finish, not just an acoustic treatment. The hole pattern becomes a design feature - micro-perforation creates a smooth matte texture; macro-perforation creates a visible decorative pattern. Colors, wood-grain, and anodized finishes integrate with the architectural vocabulary.
⑧ Integrated functions: the same panel can combine acoustics + fire rating + waterproofing + impact resistance + cleanability. No need to layer separate materials with conflicting properties. Simplifies specification, procurement, and installation.
⑨ Antimicrobial options: anti-bacterial powder coating or anodizing on the perforated face - critical for healthcare and food environments where surface hygiene is regulated.
⑩ Long service life - zero degradation: acoustic fleece behind the perforations does not degrade, settle, or lose performance over time (unlike mineral wool, which can slump inside wall cavities). The aluminum panel itself has an unlimited life. Acoustic performance is stable for 30+ years.
Q: 6. What acoustic configurations and design options are available?
A: Acoustic configurations - how sound absorption is achieved:
① Perforated face + acoustic fleece + air cavity (standard): the most common configuration. Sound passes through the holes, through the fleece (high-frequency absorber), and into the air cavity (low-frequency resonator). Fleece prevents dust and debris from entering the cavity. NRC 0.55–0.85.
② Perforated face + mineral wool infill + solid back: mineral wool fills the cavity behind the perforated face, providing broadband absorption. Higher NRC (0.75–0.95) but gives up cleanability (mineral wool is hidden but present). Used in industrial and transport applications where maximum absorption is needed.
③ Micro-perforated face + air cavity + solid back (pure Helmholtz resonator): no fleece, no mineral wool - the sound absorption comes entirely from the micro-perforations. The panel is 100% metal and can be washed aggressively. NRC 0.45–0.75. The ultimate cleanable acoustic panel for food/pharma/healthcare.
④ Double-layer micro-perforated (ML-MPP): two micro-perforated aluminum sheets separated by air gaps - broadband absorption from a single 100% metal panel. Advanced acoustic engineering for the highest demands.
⑤ Perforated face + acoustic fleece + honeycomb core (sandwich panel): the honeycomb core cells each act as individual Helmholtz resonators - broadband absorption in a thin, rigid structural panel. NRC 0.60–0.85. Ideal for architectural applications where the panel is structural.
Perforation patterns - visual + acoustic design:
· Round holes (standard): staggered 60° pitch - maximum open area, cleanest appearance
· Square holes: modern linear grid aesthetic
· Slotted: linear slots (2–5mm wide, 50–100mm long) - directional visual interest
· Micro-perforation: Φ0.8–1.0mm, very small pitch (2–3mm) - the holes are nearly invisible from >2m distance, creating a smooth matte surface
· Graduated / gradient pattern: hole size or density varies across the panel - creates visual movement and acoustic zoning
· Custom image / logo perforation: CNC-drilled holes form a recognizable image, text, or logo - branding meets acoustics
· Combined perforated + solid areas: perimeter solid border with perforated central field - for ceiling panel edge detail
· Perforation with backlighting: LED strips behind the perforated panel create a glowing acoustic ceiling - dramatic architectural effect
Q: 7. Is the panel fire-resistant?
A: Yes, definitively. All-aluminum perforated acoustic panels are 100% non-combustible (GB 8624 Class A, EN 13501-1 A1). The aluminum face, aluminum core (if present), and aluminum back skin are all non-combustible metals.
The acoustic fleece (if used) is typically a non-woven polyester or glass fiber material - in the thin layer used (0.2–0.5mm, approximately 50–150 g/m²), its contribution to fire load is negligible. For applications requiring the absolute maximum fire safety (tunnels, underground stations, aircraft), the pure micro-perforated configuration (no fleece, no mineral wool) is specified - 100% metal, zero combustible content.
Fire certifications:
· GB 8624 Class A
· EN 13501-1 A1
· BS 476 Class 0
· ASTM E84 Class A
· FAR 25.853 (a) - aircraft interiors
· IMO FTP Code Part 1 & 5 - marine
Fire test reports are available for standard configurations. For certified fire-rated ceiling and wall assemblies incorporating acoustic panels, system-level test reports are provided.
Q: 8. What is the typical production lead time?
A: · Standard perforation patterns (round holes, standard pitch), standard panel sizes: 15–20 working days
· Custom perforation patterns or hole sizes: 20–30 working days (includes perforation die setup or CNC programming)
· Micro-perforation or graduated patterns: 25–35 working days
· Large project orders (5,000+ panels): phased delivery, schedule confirmed case-by-case
Perforation is performed by CNC turret punch or CNC drilling/routing. Production speed depends on hole count per panel. A 600×600mm panel with 2.5mm holes at 23% open area has approximately 15,000–20,000 holes per panel.
We recommend engaging our acoustic engineers 6–8 weeks before panels are needed on site to allow time for acoustic modeling, sample panel production with sound absorption testing (impedance tube or reverberation chamber), and final production.
Q: 9. How are the panels packaged and shipped?
A: Packaging: Each panel face is protected with factory-applied PE protective film (essential - the film prevents dust from entering the perforations during transport and installation). Panels are separated by foam interlayers and packed in heavy-duty corrugated cartons (10–20 panels per carton). Corner protectors are applied. The cartons are palletized, stretch-wrapped, and strapped. For export, the pallets are enclosed in plywood crates.
Special acoustic note: Do NOT stack panels face-to-face directly without separation - the perforations of one panel can imprint on the surface of the adjacent panel under pressure. Use foam interlayers at all times.
Shipping:
· Domestic: dedicated air-ride logistics, door-to-door
· International: FCL sea freight. FOB/CIF terms.
Storage on site: store flat in a clean, dry area. Keep PE film on until after installation and construction cleaning. Perforation holes can trap construction dust - removing the film early defeats the purpose.
Q: 10. How are all-aluminum perforated acoustic panels installed?
A: Installation - follow the same mechanical installation procedures as standard all-aluminum ceiling or wall panels, with additional acoustic-specific considerations:
① Acoustic fleece handling: the black acoustic fleece is factory-applied to the back of the perforated face. Do NOT remove, puncture, or compress the fleece - it is essential for acoustic performance and visual blackout (without it, the cavity behind is visible through the holes).
② Cavity depth: the air cavity depth behind the panel is critical for low-frequency absorption. Acoustic shop drawings specify the exact cavity depth. Ensure the substructure maintains this depth consistently - variation of ±10mm affects the Helmholtz resonance frequency.
③ Air-tight perimeter: for Helmholtz resonator panels (especially micro-perforated), the cavity behind the panel should be as air-tight as possible for maximum low-frequency absorption. Seal panel-to-panel joints and perimeter edges with acoustic sealant or butyl tape. Leakage reduces low-frequency performance.
④ Mineral wool installation (if specified): install mineral wool or glass wool in the cavity behind the panel before the panel is mounted. Ensure complete coverage, no gaps between batts. Secure with mechanical fixings or impaling pins to prevent slumping.
⑤ Panel installation to substructure: same methods as non-acoustic panels - lay-in (T-grid), clip-in, hook-on, Z-clips, etc. Ensure panels are fully seated and aligned. Gaps between adjacent panels degrade acoustic performance and create visible light leaks from the black cavity behind.
⑥ Edge trim and perimeter closure: install perimeter trim profiles after all panels are in place. The trim covers the exposed cavity edge and provides a finished visual border.
⑦ Post-installation inspection: check:
- All panels are flush and level
- Joints are tight and sealed (if acoustic sealing is specified)
- PE protective film is still on (remove only after all construction activities are complete)
- There are no gaps, missing panels, or misaligned panels
⑧ Film removal: remove PE protective film from all panels only after construction is complete and the space has been final-cleaned. Remove film slowly at a 180° angle to avoid pulling up panel edges. Inspect for any construction dust in the perforations - vacuum gently if needed (do NOT use compressed air, which drives dust into the fleece).
We provide acoustic installation manuals, cavity detail drawings, and on-site acoustic commissioning support for critical projects.
Hot Tags: all-aluminum perforated acoustic panel, China all-aluminum perforated acoustic panel manufacturers, suppliers, factory, Aluminium Honeycomb Roof Panel, Aluminum Core Panel, Aluminum Honeycomb Board, Aluminum Honeycomb Sandwich Panel, Aluminum Honeycomb Sheet, Honeycomb Aluminium Sheet





