All-Aluminum Cabinet Honeycomb Panel
All-Aluminum Cabinet Honeycomb Panel

All-Aluminum Cabinet Honeycomb Panel

Total Panel Thickness: 15 mm, 18 mm, 20 mm, 22 mm, 25 mm
Face Skin Alloy & Thickness: 3003-H14 (standard) or 5052-H32 (marine); 0.8 mm, 1.0 mm, 1.2 mm
Back Skin Alloy & Thickness: 3003-H14; 0.5 mm, 0.8 mm, 1.0 mm
Honeycomb Core Alloy: 3003-H18 / 5052-H18
Core Cell Size: 6.4 mm, 8.0 mm
Core Density: 60, 72, 80, 96 kg/m³
Send Inquiry

Product Overview

 

The All-Aluminum Cabinet Honeycomb Panel is a premium cabinet panel in which every component - face skin, back skin, honeycomb core, and edge profile - is manufactured from aluminum alloy. The panel consists of an aluminum honeycomb core (3003-H18, 6.4 mm cell, 60–80 kg/m³) bonded between two aluminum face skins (0.8–2.0 mm, 3003-H14 or 5052-H32) using high-performance structural epoxy adhesive under heat and pressure, with an aluminum U-channel or angle edge profile bonded around the perimeter during pressing. Surface finishes include powder coating (60–120 μm) in full RAL/NCS colors, wood-grain transfer (EIR synchronized), anodizing (10–25 μm), PVDF fluorocarbon (25–40 μm), and brushed metal. All-aluminum construction means the panel is 100% waterproof throughout its entire structure, zero-formaldehyde and zero-VOC, termite-proof, mold-proof, Class A fire-rated (non-combustible), and 100% recyclable. At 18 mm thickness, the panel weighs 7.5–9.5 kg/m² - 40% lighter than solid aluminum plate and significantly lighter than solid wood. The panel is engineered for kitchen cabinet doors, bathroom vanity doors and drawer fronts, wardrobe doors, laboratory casework, marine cabinetry, and all applications where permanent waterproof performance, hygiene, and fire safety are required.

 

Key Features & Advantages

 

  • 100% Waterproof - Zero Water Absorption: Every component is aluminum - no wood fiber, no particleboard, no MDF. The panel can be submerged indefinitely with zero swelling, zero delamination, zero mold growth, zero deterioration. Kitchen and bathroom cabinets look identical after 20 years.
  • Zero Formaldehyde & Zero VOC: No wood substrate = no urea-formaldehyde resin. The epoxy structural adhesive is near-zero emission. Meets ENF, E0, CARB Phase 2, and French A+ indoor air quality. Safe for nurseries, healthcare, and enclosed kitchens.
  • Class A Fire-Rated (Non-Combustible): 100% aluminum - GB 8624 Class A, EN 13501-1 A1. Zero fire load contribution, zero toxic smoke. Fully compliant with fire codes for high-rise residential and public building cabinetry.
  • Termite, Pest & Mold-Proof: Aluminum is inorganic - termites cannot eat it, mold cannot grow on it, bacteria cannot penetrate it. The ideal material for tropical, subtropical, and coastal climates where wood cabinetry fails within years.
  • Permanent Flatness - Zero Warping Forever: The aluminum honeycomb core mechanically locks the panel geometry. Cabinet doors stay perfectly flat and close consistently year-round - zero seasonal movement, zero bowing, zero twisting.
  • Lightweight - Easier Handling & Installation: At 7.5–9.5 kg/m² (18 mm), the panel is 40% lighter than solid aluminum plate and 30–50% lighter than solid wood. Hinges last longer; installers work faster.
  • Scratch & Impact-Resistant Finish: 0.8–1.2 mm aluminum skins with 60–120 μm powder coating provide superior dent and scratch resistance vs. melamine-faced MDF or PVC-foiled boards.
  • Heat & UV Resistant: Aluminum withstands heat from ovens, dishwashers, and direct sunlight without degradation. Powder coating is UV-stable - no discoloration over time.
  • Hygienic & Easy to Clean: Non-porous metal surface wipes clean with any household cleaner. No absorption of food spills, grease, or odors. Anti-fingerprint and anti-bacterial coating options available.
  • Hardware-Compatible - Standard Machining: Pre-drilled for 35 mm cup hinges (Blum, Hettich, Grass, DTC compatible). Line-bored for shelf pins at 32 mm system spacing. Accepts standard Euro screws and cam-lock connectors.
  • Wide Design Palette: Powder coating in any RAL/NCS color (matte/satin/gloss), wood-grain transfer (oak, walnut, teak, ash, grey), anodizing (silver, bronze, champagne, black), PVDF (exterior), brushed metal, anti-fingerprint, anti-bacterial.
  • 100% Recyclable: The entire panel - skins, core, edge - is aluminum. Closed-loop recycling with positive scrap value. Supports LEED, BREEAM, and WELL certifications.

 

Technical Specifications

 

Parameter

Specification

Total Panel Thickness

15 mm, 18 mm, 20 mm, 22 mm, 25 mm

Face Skin Alloy & Thickness

3003-H14 (standard) or 5052-H32 (marine); 0.8 mm, 1.0 mm, 1.2 mm

Back Skin Alloy & Thickness

3003-H14; 0.5 mm, 0.8 mm, 1.0 mm

Honeycomb Core Alloy

3003-H18 / 5052-H18

Core Cell Size

6.4 mm, 8.0 mm

Core Density

60, 72, 80, 96 kg/m³

Standard Panel Size

1220×2440 mm, 1220×2745 mm, 1220×3050 mm

Custom Panel Size

Up to 1500×4000 mm

Panel Weight (18 mm typical)

Approx. 7.5–9.5 kg/m²

Edge Treatment

Aluminum U-channel or L-angle edge profile (same alloy and finish) - bonded around perimeter during pressing

Surface Finishes

Powder coating (60–120 μm), PVDF (25–40 μm), wood-grain transfer (EIR), anodizing (10–25 μm), brushed metal + clear lacquer

Color Range

Full RAL Classic/Design, NCS palette; custom color matching; wood-grain species: oak, walnut, teak, ash, grey + custom

Special Coatings

Anti-fingerprint (matte nano-coating), anti-bacterial (silver-ion, JIS Z 2801), anti-graffiti, UV-resistant

Fire Rating

Class A (GB 8624); A1 (EN 13501-1); ASTM E84 Class A

Formaldehyde Emission

ENF / E0 / CARB Phase 2 / French A+ compliant (zero wood content)

Hinge Compatibility

35 mm cup concealed hinges - Blum, Hettich, Grass, Salice, DTC, and all major brands

Shelf Pin System

5 mm pins at 32 mm spacing - standard line-boring compatible

Hardware Fastening

Euro screws (system screws) into pre-drilled pilot holes; metal threaded inserts for removable connections

 

Edge Profile Options

 

Profile Type

Appearance

Application

Aluminum U-Channel

Full wrap - clean, protected edge; face, edge, and back covered

Standard for cabinet doors - most durable edge protection

Aluminum L-Angle

Face and one edge covered; back side exposed at corner

Economical - for end panels and concealed edges

Flat Bar (Edge Trim)

Thin aluminum strip bonded to the exposed honeycomb edge

Minimal edge - for modern minimalist cabinet design

Miter-Folded Skin

The face skin is folded 90° over the edge and bonded - seamless look

Premium - no visible edge profile; requires 1.2 mm+ skin thickness

 

Door Style & Hardware Compatibility

 

Door Style

Panel Construction

Hardware

Flat Slab (Modern)

Single-piece flat panel - powder coat, wood-grain, or anodized finish

35 mm concealed hinges (2–4 hinges per door); integrated J-pull or separate handle

Shaker / Framed

Aluminum perimeter frame (40–80 mm wide) + recessed center panel

Standard hinges; frame provides additional screw-holding for handles

Handleless J-Pull

C-channel or J-profile groove machined into door edge (top or side)

Push-to-open touch latch or integrated finger-pull - no separate handle

High-Gloss Lacquered

Mirror-gloss finish (85+ GU) on flat slab aluminum panel

Soft-close hinges essential - prevents slamming that cracks lacquer

Aluminum-Framed Glass

Aluminum profile frame with tempered glass insert (clear, frosted, tinted)

Standard hinges on frame; glass insert is replaceable

 

Applications

 

Kitchen cabinets: doors, drawer fronts, end panels, island panels - waterproof, heat-resistant, grease-resistant. Bathroom vanities: doors, drawer fronts, open shelving - 100% humidity-proof, no swelling, no mold. Wardrobe systems: sliding and hinged doors, internal shelving - stays flat forever. Laboratory & hospital cabinetry: hygienic, chemical-resistant, sterilizable - anti-bacterial coating option. Outdoor kitchens & BBQ cabinets: PVDF-coated, weather-resistant - withstands rain, sun, temperature extremes. Marine & yacht cabinetry: 5052 marine-grade alloy - saltwater corrosion-resistant, IMO fire-compliant. Cleanroom cabinetry: non-shedding, smooth, chemical-resistant - ISO Class 5–8. Retail & commercial fit-outs: display cabinets, reception counters - durable, premium appearance. Hotel room furniture: bedside tables, desks, minibar cabinets - fire-safe, quiet-close, 20+ year design life. Educational furniture: laboratory casework, library shelving, classroom storage - impact-resistant, maintenance-free.

 

product-1024-1024
product-1024-1024
product-1024-1024
product-1024-1024

 

Processing & Packaging

 

Processing: Cutting - panel saw with carbide-tipped blade (80–100 teeth); CNC router with compression bit (12,000–18,000 RPM, 3–6 m/min). Edge banding: aluminum U-channel/L-angle edge profiles bonded with MS polymer or structural epoxy during panel pressing - not applied post-production. Hinge boring: 35 mm Forstner bit at 2,500–3,500 RPM - standard 32 mm line-boring for shelf pins. Handle drilling: pre-drilled for standard centers (64/96/128/160 mm). Fastening: Euro screws into pre-drilled pilot holes; metal threaded inserts (epoxy or screw-in) for removable connections. Sanding/refinishing: powder-coated surfaces can be lightly sanded and re-coated; anodized surfaces should NOT be sanded. Packaging: PE film on finished face, foam interlayer separation, corner protectors, palletized, stretch-wrapped, plywood crates for export. MOQ: 50–100 m² standard; 100–200 m² custom. Samples: 400×600 mm finished door panel available. Lead time: 10–15 days standard powder coat; 15–25 days wood-grain/custom; 20–30 days anodized. FCL sea freight (FOB/CIF). Store flat; remove PE film only after installation.

 

All-Aluminum Honeycomb Cabinet Panel FAQ

 

Q: 1. What is an all-aluminum honeycomb cabinet panel?

A: An all-aluminum honeycomb cabinet panel is a premium cabinet panel in which everything - both face skins, the honeycomb core, the edge profile, and even the decorative surface - is made from aluminum. The panel consists of an aluminum honeycomb core (typically 3003-H18 alloy, 6.4mm cell, 60–80 kg/m³) bonded between two aluminum face skins (0.8–2.0mm thick, 3003 or 5052 alloy) using high-performance structural adhesive, then finished with powder coating, PVDF, or wood-grain transfer. All-aluminum construction means the panel is 100% waterproof, zero-formaldehyde, termite-proof, fire-safe, and fully recyclable. Unlike SPC/aluminum hybrid panels or HPL-faced panels, the all-aluminum cabinet panel has no plastic, no wood, no laminate - just metal - offering unmatched longevity, hygienic properties, and a premium metallic aesthetic.

Q: 2. What are the standard specifications?

A: Common specifications:
· Total thickness: 15mm, 18mm, 20mm, 22mm, 25mm (standard cabinet panel thicknesses)
· Face skin: 0.8mm, 1.0mm, 1.2mm aluminum sheet (3003-H14 or 5052-H32)
· Back skin: 0.5mm, 0.8mm, 1.0mm aluminum sheet
· Honeycomb core: 3003-H18, 6.4mm cell, density 60–80 kg/m³
· Standard panel size: 1220×2440mm, 1220×2745mm, 1220×3050mm (custom up to 1500×4000mm)
· Weight: approximately 7.5–9.5 kg/m² at 18mm total thickness - 40% lighter than solid aluminum plate of equivalent thickness
· Edge treatment: aluminum U-channel edge closure (same alloy and finish) bonded around the perimeter during panel pressing
· Surface finishes: powder coating (60–120μm), PVDF fluorocarbon (25–40μm), wood-grain transfer, anodizing (10–25μm), brushed metal
· Door styles: flat slab (modern minimalist), framed (Shaker-style), grooved/paneled (routed V-grooves)
· Hardware compatibility: pre-drilled for standard 35mm cup hinges; compatible with Blum, Hettich, Grass, Salice, DTC, and all major hardware brands

Q: 3. What is the minimum order quantity (MOQ)?

A: The typical MOQ is 50–100 square meters for standard colors and finishes. For custom RAL colors, special textures, or non-standard panel sizes, the MOQ may be 100–200 m². We offer sample door panels (e.g., 400×600mm finished door) for quality evaluation before bulk orders. Please provide your door schedule (sizes, quantities, hinge boring requirements, finish selection) for a quotation.

Q: 4. Where are all-aluminum honeycomb cabinet panels used?

A: Common applications:
· Kitchen cabinets: door fronts, drawer fronts, end panels, island panels - waterproof and heat-resistant for cooking environments
· Bathroom vanities: completely unaffected by steam, splash water, and high humidity - the ultimate bathroom cabinet material
· Wardrobe doors: sliding and hinged doors - stays flat and true forever without warping
· Laboratory and hospital cabinetry: hygienic, chemical-resistant, easy to sterilize - powder-coated or anodized surfaces meet healthcare standards
· Outdoor kitchens and BBQ cabinets: weather-resistant with PVDF coating - withstands rain, sun, and temperature extremes
· Marine and yacht cabinetry: 5052 marine-grade alloy - saltwater corrosion-resistant and IMO fire-compliant
· Cleanroom cabinetry: non-shedding, smooth surface, compatible with cleanroom cleaning protocols
· Retail and commercial fit-outs: display cabinets, reception counters, point-of-sale units - durable, premium look
· Hotel room furniture: bedside tables, desks, minibar cabinets - fire-safe, quiet-close, 20+ year design life
· Educational furniture: laboratory casework, library shelving, classroom storage - withstands student wear-and-tear

Q: 5. What are the advantages over other cabinet panel materials?

A: ① 100% waterproof - forever: unlike MDF, particleboard, plywood, and even SPC-faced panels, there is zero wood, zero fiber, zero particle anywhere in an all-aluminum cabinet panel. It can be submerged in water indefinitely with no swelling, no delamination, no mold, no deterioration. Kitchen and bathroom cabinets look exactly the same after 20 years.
② Zero formaldehyde and zero VOCs: no wood substrate means no formaldehyde-based resin (urea-formaldehyde, phenol-formaldehyde). The structural adhesive used is epoxy-based with near-zero VOC emission. Meets ENF (China's strictest formaldehyde standard), E0, CARB Phase 2, and French A+ indoor air quality standards. Suitable for nurseries, healthcare, and allergy-sensitive environments.
③ Termite, pest, and mold-proof: aluminum is inorganic - termites cannot eat it, mold cannot grow on it, bacteria cannot penetrate it. The ideal material for tropical, subtropical, and coastal climates where wood-based cabinetry fails within years.
④ Fire-safe (Class A): all-aluminum construction is non-combustible - Class A under GB 8624. No fire load contribution; no toxic smoke. Meets the strictest building codes for high-rise residential and public buildings.
⑤ Permanent flatness - no warping: solid wood doors warp seasonally; MDF doors absorb moisture and bow. The aluminum honeycomb core locks the panel geometry permanently - doors will be as flat in year 20 as on day one.
⑥ Lightweight and hardware-friendly: at 7.5–9.5 kg/m² (18mm), all-aluminum panels are significantly lighter than solid wood (12–18 kg/m²). Hinges last longer, soft-close mechanisms work more smoothly, and installers can carry and hang doors with less effort.
⑦ Heat and UV resistant: aluminum withstands heat from ovens, dishwashers, and direct sunlight without degradation. Powder coating is UV-stable. No discoloration or embrittlement over time.
⑧ Impact and scratch-resistant: 0.8–1.2mm aluminum skins with powder coating (60–120μm) provide excellent dent and scratch resistance. Much tougher than melamine-faced MDF or PVC-foiled boards.
⑨ Hygienic and easy to clean: non-porous metal surface - wipes clean with any household cleaner. No absorption of food spills, grease, or odors. Anti-fingerprint coating options available.
⑩ 100% recyclable: at end of life, the entire panel - aluminum skins, core, edge profile - can be recycled together. Closed-loop material with high scrap value. Contributes to LEED, BREEAM, and WELL building certifications.

Q: 6. What surface finishes and design options are available?

A: · Powder coating: the most popular finish for cabinet panels. Wide color range (RAL, NCS, custom matching), available in matte (30±5 GU), satin (50–70 GU), and high-gloss (85+ GU). Texture options: smooth, fine texture (sand), coarse texture (leather). Anti-fingerprint clear coat available. Scratch and chemical resistant.
· PVDF fluorocarbon: premium finish with 25+ year color and gloss retention. Available in solid, metallic, and pearlescent colors. Recommended for outdoor kitchens and high-UV exposure areas.
· Wood-grain transfer (sublimation): hyper-realistic wood textures - oak, walnut, ash, teak, rosewood, etc. - sublimated into the powder coating base at 180–200°C. EIR (Embossed in Register) synchronized grain texture available. The visual result is often indistinguishable from real wood but with all the benefits of aluminum.
· Anodizing: hard, metallic finish with natural aluminum, bronze, champagne, black, or gold tones. Premium, contemporary aesthetic. Commonly used in commercial and high-end residential projects.
· Brushed / hairline metal: linear brushed texture with clear lacquer - stainless steel, titanium, or brass effect. Modern industrial style.
· Mirror / high-gloss polished: reflective surface for statement pieces and luxury interiors.
· 3D embossed / textured: geometric patterns, fluted, linen, leather textures pressed into the aluminum skin before coating.
· Integrated handle profiles: J-pull or C-channel handle groove machined into the panel edge (top, bottom, or side) - seamless integrated handle, popular for modern minimalist kitchens.
· Glass / mirror inset: aluminum panel with routed recess to accept glass or mirror insert - for display cabinets and wardrobe doors.

Q: 7. Is the panel fire-resistant?

A: Yes, unreservedly. An all-aluminum honeycomb cabinet panel is 100% metal. The aluminum skins (3003/5052), the aluminum honeycomb core (3003), and the aluminum edge profile are all non-combustible metals classified as Class A (GB 8624) / A1 (EN 13501-1). The only non-metal component is a thin layer of epoxy structural adhesive (<2% by weight), which is negligible in fire contribution.
Fire properties:
· No flame spread, no afterglow
· No smoke production (aluminum does not produce smoke)
· No flaming droplets
· Compliant with GB 8624 Class A, EN 13501-1 A1, ASTM E84 Class A
This makes all-aluminum cabinet panels fully compliant with fire safety regulations for high-rise residential kitchens, hotel room cabinetry, hospital casework, and public building interiors where combustible furniture load must be minimized.

Q: 8. What is the typical production lead time?

A: · Standard powder coat colors (white, grey, black, beige): 10–15 working days
· Custom RAL powder coat colors: 15–20 working days
· Wood-grain transfer: 15–25 working days
· Anodizing: 20–30 working days
· Large project orders (200+ door panels): timeline confirmed case-by-case
Production steps include panel pressing (adhesive cure: 4–8 hours at elevated temperature), edge profiling, CNC machining (hinge boring, handle cutouts, grooving), surface finishing, and quality inspection. We recommend ordering 5–7 weeks before kitchen installation.

Q: 9. How are the panels packaged and shipped?

A: Packaging: Each panel face is protected with a peel-off PE protective film (blue or transparent, 50μm thickness). Panels are individually separated by foam sheets, edge-protected with cardboard corner guards, and stacked on pallets. The pallet is wrapped in heavy-duty stretch film and enclosed in a plywood crate for export. Each panel is labeled with its door number corresponding to the installation schedule.
Shipping:
· Domestic: dedicated logistics with air-ride suspension trucks, door-to-door
· International: FCL sea freight. FOB/CIF terms.
Container capacity (40HQ): approximately 800–1,200 finished door panels (depending on size).
Transit damage is rare (<0.3%) with our packaging system. Any damage is resolved with free replacement panels.

Q: 10. How are all-aluminum honeycomb cabinet panels installed?

A: Installation - designed for standard cabinet hardware and joinery methods:
① Hinge mounting: panels arrive pre-bored for 35mm cup hinges (standard system holes). Attach hinges to the panel with 8mm Euro screws; pre-drilled pilot holes ensure correct screw alignment. Adjust 3D hinges (height, side, depth) for perfect door alignment.
② Handle installation: panels can be pre-drilled for handle screws (standard 96mm, 128mm, 160mm centers) or have integrated J-pull/C-channel grooves (no separate handle needed).
③ Drawer front mounting: attach to drawer boxes using screws from inside the drawer box. Pre-drilled holes or double-sided tape + silicone for invisible fixing.
④ Panel joining (for tall cabinets and end panels): butt-joint panels with connector bolts or cam-locks; for seamless joints, use aluminum H-channel connectors between panels.
⑤ Wall panel / backsplash installation: adhesive (MS polymer) to the wall substrate, with mechanical fixings at top and bottom edges concealed behind cabinets.
⑥ Adjustable shelf installation: panels can be drilled for shelf support pins (5mm system holes at 32mm spacing) - compatible with all standard cabinet shelf systems.
Hardware recommendations: use 2 hinges for doors ≤ 900mm wide, 3 hinges for doors 900–1200mm, and 4 hinges for doors > 1200mm (standard for aluminum panels due to their light weight). Soft-close hinges and drawer runners are fully compatible.
We provide a detailed installation manual with torque specifications for all screw types into aluminum. Video guides are available for first-time installers.

 

Hot Tags: all-aluminum cabinet honeycomb panel, China all-aluminum cabinet honeycomb panel manufacturers, suppliers, factory, Alu Honeycomb, Aluminium Honeycomb Sandwich Panel, Aluminum Honeycomb Board, Aluminum Honeycomb Plate, Aluminum Honeycomb Sandwich Panel, Aluminum Honeycomb Sheet