SPC Aluminum Honeycomb Panel
SPC Aluminum Honeycomb Panel

SPC Aluminum Honeycomb Panel

Total Panel Thickness: 8, 10, 12, 15, 18, 20, 22, 25 mm
SPC Surface Layer: 1.0, 1.5, 2.0, 2.5, 3.0 mm
SPC Wear Layer (Optional): 0.3, 0.5 mm UV-cured transparent
Aluminum Face Skin: 0.3, 0.5 mm (3003-H14 or 5052-H32)
Aluminum Back Skin: 0.3, 0.5, 0.8 mm
Honeycomb Core Alloy: 3003-H18 / 5052-H18
Core Cell Size / Density: 6.4, 8.0 mm / 60, 72, 80, 96 kg/m3
Standard Panel Size: 1220x2440, 1220x2745, 1220x3050 mm; custom up to 1500x4000 mm
Send Inquiry

Product Overview

 

The SPC Aluminum Honeycomb Panel is a multi-layer composite panel that bonds an SPC (Stone Plastic Composite) decorative surface layer (1.0-3.0 mm) to an aluminum honeycomb core (3003-H18, 6.4 mm cell, 60-80 kg/m3) with an aluminum back skin (0.3-0.5 mm), using high-strength polyurethane or epoxy structural adhesive under heat and pressure. SPC is composed of natural limestone powder (60-70%), PVC resin, and stabilizers - it is 100% waterproof, Shore D 75-85 hard, dimensionally stable, and highly durable. The aluminum honeycomb core provides exceptional strength-to-weight ratio and absolute flatness. SPC aluminum honeycomb panels combine the waterproof, scratch-resistant, and design-flexible surface of SPC with the structural performance of aluminum honeycomb. At 15 mm thickness, the panel weighs 5-9 kg/m2 - 40-60% lighter than solid SPC. The panel is zero-formaldehyde, termite-proof, and mold-proof, making it ideal for kitchen and bathroom cabinetry, wall cladding, furniture, doors, and architectural interiors where moisture resistance, durability, and lightweight construction are essential.

 

Key Features & Advantages

 

  • 100% Waterproof Forever: SPC absorbs less than 0.1% water (24h immersion). Aluminum core is zero absorption. No swelling, no delamination, no edge-bursting - even under sinks and in bathroom vanities.
  • Zero Formaldehyde and VOC-Free: No wood content, no UF/MUF resin, zero formaldehyde emission. Meets ENF, E0, CARB Phase 2, and French A+ standards. Safe for nurseries, bedrooms, and enclosed kitchens.
  • Termite, Pest and Mold-Proof: SPC and aluminum are both inorganic - zero food source for termites, zero substrate for mold. The permanent solution for tropical and subtropical climates where wood-based panels fail within years.
  • Superior Surface Hardness: SPC Shore D hardness 75-85. Highly scratch-resistant (keys, cutlery, daily wear). With optional UV-cured wear layer (0.3-0.5 mm), suitable for heavy-use commercial cabinetry.
  • Absolute Flatness - No Warping: Aluminum honeycomb core mechanically locks panel geometry. Zero warping, zero bowing, zero seasonal movement. Cabinet doors close perfectly year-round.
  • 40-60% Lighter than Solid SPC: 15 mm honeycomb panel weighs 5-9 kg/m2 vs. 15-22 kg/m2 solid SPC. Easier handling, reduced cabinet load, smoother drawer and hinge operation.
  • Fire-Retardant: SPC contains PVC (self-extinguishing due to chlorine content); aluminum core is non-combustible (Class A). Panel achieves Class B1 (GB 8624). FR-grade available for Class A.
  • Excellent Acoustic Damping: Multi-layer construction (SPC + aluminum skin + honeycomb core + aluminum back) dampens vibration - quieter cabinet doors and drawers than solid SPC or MDF.
  • Fabrication-Friendly: Cut, drill, edge-band, and CNC-route using standard woodworking tools with carbide-tipped blades. Compatible with all standard hardware systems (Blum, Hettich, Grass, DTC).
  • 100% Recyclable: Separable into SPC and aluminum streams at end of life. Supports LEED, BREEAM, and WELL certifications.

 

Technical Specifications

 

Parameter

Specification

Total Panel Thickness

8, 10, 12, 15, 18, 20, 22, 25 mm<br/>

SPC Surface Layer

1.0, 1.5, 2.0, 2.5, 3.0 mm<br/>

SPC Wear Layer (Optional)

0.3, 0.5 mm UV-cured transparent<br/>

Aluminum Face Skin

0.3, 0.5 mm (3003-H14 or 5052-H32)<br/>

Aluminum Back Skin

0.3, 0.5, 0.8 mm<br/>

Honeycomb Core Alloy

3003-H18 / 5052-H18<br/>

Core Cell Size / Density

6.4, 8.0 mm / 60, 72, 80, 96 kg/m3<br/>

Standard Panel Size

1220x2440, 1220x2745, 1220x3050 mm; custom up to 1500x4000 mm

Panel Weight (15 mm typical)

Approx. 5-9 kg/m2

SPC Density

1.9-2.1 g/cm3

SPC Water Absorption

Less than 0.1% (24h immersion)

SPC Shore D Hardness

75-85

SPC Heat Resistance

Continuous to 80 C; peak to 120 C

Surface Finishes

Wood-grain (EIR embossed), stone/marble, solid color (matte/satin/gloss), anti-fingerprint, anti-bacterial

Wood-Grain Species

Oak, walnut, ash, teak, grey wood, whitewashed, reclaimed wood + custom

Edge Treatment

Matching SPC edge banding, aluminum profile, PVC/ABS tape

Fire Rating

Class B1 (GB 8624); FR-grade Class A available

Formaldehyde Emission

ENF / E0 / CARB Phase 2 compliant

Hinge Compatibility

35 mm cup concealed hinges - Blum, Hettich, Grass, DTC compatible

 

SPC Surface Finish Selection Guide

 

Finish Category

Texture Type

Visual/Feel

Application

Wood-Grain (EIR)

Synchronized embossed grain matching print

Hyper-realistic wood - indistinguishable from real timber at 2 m

Cabinet doors, wall panels, furniture - most popular

Stone/Marble

Matching stone-like surface texture

Carrara, Calacatta, travertine, slate, concrete looks

Bathroom vanities, feature walls, countertops

Solid Color Matte

Smooth matte with anti-fingerprint option

Modern minimalist - no glare, hides fingerprints

Contemporary kitchens, wardrobe doors

Solid Color Gloss

High-gloss reflective (75-85 GU)

Wet-look, dramatic, premium

Statement cabinet doors, luxury retail

Leather/Fabric Texture

Soft-touch tactile surface

Warm, premium feel - unusual for SPC

Premium furniture, feature walls, hospitality

Anti-Bacterial

Silver-ion antimicrobial additive

Tested to JIS Z 2801 - over 99.9% reduction

Healthcare, food service, education

 

Wear Layer Performance Guide

 

Wear Layer Grade

Thickness

Abrasion Resistance

Application

Standard

0.2 mm

Good - residential use

Wall panels, low-traffic cabinet doors

Enhanced

0.3-0.5 mm

Very good - commercial use

Kitchen cabinet doors, countertops, furniture

UV-Cured Ceramic Bead

0.5 mm + ceramic particles

Excellent - heavy commercial

Commercial cabinetry, retail fixtures, high-traffic

Anti-Slip Textured

0.3-0.5 mm with texture

Good + enhanced friction

Flooring, wet-area surfaces, outdoor steps

 

Applications

 

Kitchen cabinets: doors, drawer fronts, end panels, island panels. Bathroom vanities: doors, drawer fronts, open shelving. Wardrobe systems: sliding and hinged doors, internal shelving. Custom furniture: desktops, tabletops, TV stands, sideboards. Retail and commercial fit-outs: display counters, shelving, POS fixtures. Laboratory and cleanroom furniture: chemical-resistant non-porous surfaces. Marine and RV interiors: lightweight waterproof cabinetry. Hospitality: hotel room casegoods, restaurant furniture.

product-1024-1024
product-1024-1024
product-1024-1024
product-1024-1024

 

Packaging & Shipping

 

Processing: Panel saw with carbide-tipped blade (60-80 teeth), cut SPC face up for cleanest edge, feed 8-15 m/min. CNC routing: compression spiral bits, 12,000-18,000 RPM, feed 3-6 m/min. Edge banding: hot-air edge bander with matching SPC edge tape; PUR hot-melt (waterproof, high-temp) or EVA; glue pot 180-200 C. Drilling: Forstner bit for 35 mm hinge cups at 2,500-3,500 RPM; line-boring 32 mm system; backing board to prevent exit-side chipping. Fastening: Euro screws into pre-drilled pilot holes; metal threaded inserts for repeated assembly. Handle installation: pre-drill standard centers (64/96/128/160 mm). Packaging: PE film on SPC face, foam interlayers (face-to-face can imprint texture), corner protectors, palletized, stretch-wrapped, crates for export. MOQ: 100-300 m2 standard; 200-500 m2 custom. Samples: A4 or 300x300 mm available. Lead time: 10-15 days standard; 20-30 days custom SPC design. FCL sea freight (FOB/CIF). Store flat; keep PE film on.

 

SPC Aluminum Honeycomb Panel FAQ

 

Q: 1. What is an SPC aluminum honeycomb panel?

A: An SPC aluminum honeycomb panel is a multi-layer composite panel that bonds an SPC (Stone Plastic Composite) decorative surface layer to an aluminum honeycomb core with an aluminum back skin, using high-performance structural adhesive. SPC is a rigid, engineered material composed of natural limestone powder (calcium carbonate, ~60–70%), PVC resin, and stabilizers - it is 100% waterproof, dimensionally stable, and highly durable. The aluminum honeycomb core (typically 3003-H18 alloy, 6.4mm cell, 60–80 kg/m³) provides exceptional strength-to-weight ratio and absolute flatness. The aluminum back skin balances the panel and provides a clean, metallic reverse face. SPC aluminum honeycomb panels combine the waterproof, scratch-resistant, and design-flexible surface of SPC with the structural performance of aluminum honeycomb - they are a modern, high-performance panel for cabinetry, wall cladding, doors, furniture, and architectural interiors where moisture resistance, durability, and lightweight construction are required.

Q: 2. What are the standard specifications?

A: Common specifications:
· Total panel thickness: 8mm, 10mm, 12mm, 15mm, 18mm, 20mm, 22mm, 25mm
· SPC surface layer: 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm (thicker SPC for higher impact resistance and deeper embossed textures)
· Aluminum face skin (bonding substrate): 0.3mm, 0.5mm (between SPC layer and honeycomb core - improves bond strength and flatness)
· Aluminum back skin: 0.3mm, 0.5mm, 0.8mm
· Honeycomb core: 3003-H18, 6.4mm or 8.0mm cell, density 48–80 kg/m³
· Standard panel size: 1220×2440mm, 1220×2745mm, 1220×3050mm (custom sizes available)
· Weight: approximately 5–10 kg/m² (varies by thickness) - 40–60% lighter than solid SPC panels
· Edge treatment: matching SPC edge banding, aluminum profile edge closure, or PVC/ABS edge tape
· SPC surface texture: wood grain (EIR embossed), stone/marble, solid colors, matte, gloss, anti-slip, leather-textured
· Wear layer (optional): 0.3–0.5mm transparent UV-cured wear layer for enhanced scratch resistance - for flooring and high-traffic surfaces
· SPC properties: density ~1.9–2.1 g/cm³, water absorption <0.1% (24h immersion), Shore D hardness 75–85, heat resistance up to 80°C continuous

Q: 3. What is the minimum order quantity (MOQ)?

A: The typical MOQ is 100–300 square meters for standard SPC colors and textures. For custom SPC designs, special texture embossing, or non-standard thicknesses, MOQ is typically 200–500 m². Sample panels (300×300mm or A4) are available for color and texture evaluation. Please provide panel thickness, SPC color/texture selection, and application type for a quotation.

Q: 4. Where are SPC aluminum honeycomb panels used?

A: Common applications:
· Kitchen and bathroom cabinetry: cabinet doors, drawer fronts, end panels, vanity units - 100% waterproof, no swelling, no delamination in wet/damp conditions
· Wardrobe and storage systems: sliding and hinged door panels, shelving, drawer boxes - lightweight for smooth operation
· Interior wall cladding: decorative wall panels for living rooms, bedrooms, corridors, feature walls - moisture-proof and easy to install
· Ceiling panels: lightweight ceiling tiles and planks for residential and commercial interiors
· Furniture manufacturing: tabletops, desktops, shelving, TV stands, coffee tables - durable and easy to clean
· Retail and commercial fit-outs: display counters, shelving units, point-of-sale fixtures - scratch and stain resistant for high-traffic use
· Door panels: interior room doors, sliding doors - lightweight, warp-free, with realistic wood grain or solid color finish
· Laboratory and cleanroom furniture: chemical-resistant, non-porous, easy-to-sterilize work surfaces
· Hospitality furniture: hotel room casegoods, restaurant tabletops, bar counters - durable and design-flexible
· Marine and RV interiors: lightweight, waterproof, vibration-resistant panels for compact living spaces

Q: 5. What are the advantages over traditional MDF, plywood, and melamine-faced boards?

A: ① 100% waterproof - never swells or delaminates: MDF and particleboard absorb moisture and swell at cut edges and around sink areas. SPC absorbs virtually zero water (<0.1%). Paired with the aluminum honeycomb core, the panel is completely waterproof throughout - ideal for kitchens, bathrooms, laundry rooms, and humid climates where wood-based panels fail.
② Zero formaldehyde emission: MDF and particleboard contain urea-formaldehyde resin that off-gasses formaldehyde for years. SPC is PVC and limestone - zero formaldehyde. The aluminum core is inert. The panel meets ENF, E0, CARB Phase 2, and French A+ standards - safe for nurseries, healthcare, and allergy-sensitive environments.
③ Termite, pest, and mold-proof: SPC is inorganic - no food source for termites or mold. Wood-based panels are vulnerable to both, especially in tropical and subtropical regions.
④ Superior surface durability: SPC's Shore D hardness (75–85) is significantly harder than melamine-faced MDF. It resists scratches from keys, cutlery, and daily wear. The UV wear layer option makes the surface suitable for high-traffic commercial use.
⑤ Lightweight - easier handling and installation: at 5–10 kg/m², SPC honeycomb panels are 40–60% lighter than solid SPC or wood-based panels of the same thickness. One person can carry large panels; installers work faster with less fatigue.
⑥ Absolute flatness - no warping: the aluminum honeycomb core mechanically locks the panel geometry. Unlike wood-based panels that cup, bow, and twist with humidity changes, SPC aluminum honeycomb panels stay flat permanently.
⑦ Impact-resistant compared to solid SPC: solid SPC panels can crack under point impact (e.g., dropped heavy object on a corner). The aluminum honeycomb core absorbs and distributes impact energy, reducing the risk of cracking.
⑧ Better thermal insulation than all-aluminum panels: SPC has low thermal conductivity (~0.15–0.20 W/m·K). The panel feels warmer to the touch than all-aluminum panels. Combined with the insulating honeycomb core, the panel is comfortable for furniture surfaces.
⑨ Excellent acoustic damping: the multi-layer construction (SPC + aluminum skin + honeycomb core + aluminum back) creates impedance mismatches that dampen sound transmission - quieter cabinet doors and less hollow sound than solid SPC.
⑩ Cost-effective compared to HPL or solid surface panels: SPC is more economical than HPL (high-pressure laminate) and far less expensive than solid surface materials (Corian, acrylic solid surface), while offering similar waterproof and durability benefits. Excellent value for mid-to-high-end residential and commercial projects.

Q: 6. What SPC surface finishes and design options are available?

A: SPC decorative layer - designs and textures:
· Wood grains (EIR - Embossed in Register): synchronized embossing matches the texture to the printed grain - the most realistic wood-look SPC. Species: oak, walnut, ash, teak, hickory, maple, birch, grey wood, whitewashed wood, reclaimed/rustic wood.
· Stone and marble: Carrara, Calacatta, travertine, slate, sandstone, terrazzo, concrete - with matching stone-like surface texture
· Solid colors: full color palette in matte, satin, and high-gloss. Uni-color for minimalist and contemporary interiors.
· Abstract and designer: geometric patterns, textile textures, metallic effects, terrazzo
· Leather / fabric texture: soft-touch tactile surface - for premium furniture and feature walls
· Anti-bacterial SPC: silver-ion or zinc-ion antimicrobial additive - inhibits bacterial growth on the surface (tested to JIS Z 2801, >99.9% reduction)
· Anti-slip SPC: textured surface with enhanced coefficient of friction - for flooring and wet-area applications
· Anti-fingerprint: matte nano-coating on gloss surfaces - resists fingerprint smudging on high-touch surfaces
Wear layer options (transparent protective layer over the printed design):
· Standard wear layer: 0.2mm - for wall panels and low-traffic applications
· Enhanced wear layer: 0.3–0.5mm - for cabinet doors, countertops, and furniture
· UV-cured ceramic bead coating: the highest scratch resistance - for commercial and heavy-duty applications
Edge treatment options:
· Matching SPC edge banding: hot-air applied, seamless color match - most common
· Aluminum U-channel edge: metallic accent, protects the edge from impact, architectural appearance
· PVC/ABS edge tape: cost-effective, wide color range, applied with standard edge banding machine
· Miter-folded SPC (45°): the SPC face wraps around the edge - seamless one-piece look, premium appearance

Q: 7. Is the panel fire-resistant?

A: SPC contains PVC (polyvinyl chloride), which is inherently flame-retardant due to its high chlorine content (~57% by weight). PVC self-extinguishes when the flame source is removed. The aluminum honeycomb core and aluminum back skin are non-combustible (Class A).
Fire ratings:
· Standard SPC aluminum honeycomb panels: typically achieve Class B1 (flame-retardant) under GB 8624. PVC's high ignition temperature (~390°C) and self-extinguishing properties contribute to this rating.
· Enhanced fire-retardant SPC: additional ATH (aluminum trihydrate) or magnesium hydroxide fire retardants in the SPC formulation - can achieve Class A2 or Class A rating
· The panel produces low smoke and the aluminum core acts as a heat sink, delaying temperature rise through the panel thickness.
For projects with strict fire requirements (public buildings, high-rise, escape routes), specify fire-retardant SPC grade. Fire test reports are available.

Q: 8. What is the typical production lead time?

A: · Standard SPC colors and textures in stock: 10–15 working days
· Custom SPC design or color: 20–30 working days (includes SPC decorative film procurement)
· Special thickness or core configuration: 15–25 working days
· Large project orders (1,000+ m²): phased delivery, schedule confirmed case-by-case
Production process: SPC layer production (calendering or extrusion) → aluminum honeycomb core preparation → adhesive lamination (hot press or cold press with PU/epoxy adhesive) → panel cutting to size → edge finishing → quality inspection → packaging. SPC decorative film and wear layer are typically sourced from specialized SPC flooring/laminating manufacturers.

Q: 9. How are the panels packaged and shipped?

A: Packaging: Each panel's SPC face is protected with factory-applied PE protective film (50–75μm). Panels are stacked with foam interlayers (face-to-face contact can imprint texture onto the adjacent panel surface). Corner protectors are applied. Pallets are wrapped in heavy-duty stretch film and secured with polyester strapping. For export, pallets are enclosed in plywood crates.
Shipping:
· Domestic: dedicated logistics, door-to-door
· International: FCL sea freight. FOB/CIF terms.
Container capacity (20GP): approximately 1,500–2,000 m² for 15mm panels.
Storage: store flat in a dry, ventilated area. Keep PE film on until after fabrication/installation. Avoid prolonged direct sunlight on uninstalled panels (while SPC is UV-resistant, the PE film may degrade).

Q: 10. How are SPC aluminum honeycomb panels processed and installed?

A: Processing - SPC aluminum honeycomb panels can be fabricated using standard woodworking tools:
· Cutting: panel saw or table saw with carbide-tipped blade (60–80 teeth). Cut with the SPC face up for the cleanest visible edge. Feed rate: 8–15 m/min. The aluminum back skin cuts cleanly with carbide blades.
· CNC routing: use compression spiral bits for clean cuts on both faces. Spindle speed 12,000–18,000 RPM, feed rate 3–6 m/min. Aluminum skin does not cause excessive tool wear.
· Edge banding: hot-air edge banding machine with matching SPC edge tape. Recommended glue: PUR reactive hot-melt (waterproof, high-temperature resistant) or EVA (standard). Glue pot temperature: 180–200°C. Apply edge banding before cutting out hinge pockets.
· Drilling: for hinges (35mm cup), use a Forstner bit or hinge boring bit. Drill speed 2,500–3,500 RPM. Use a backing board to prevent exit-side chipping of the SPC layer. Line-bore for shelf pins using a standard 32mm system drilling machine.
· Fastening: use Euro screws (system screws) into pre-drilled pilot holes. The SPC layer holds screws securely. For repeated assembly/disassembly, use metal threaded inserts (epoxy or screw-in type).
· Handle installation: pre-drill for handle screws (standard 64/96/128/160mm centers). Use through-bolts with washers for back-to-back handles on glass-look doors.
Installation:
· Cabinet doors: mount on standard concealed hinges (35mm cup). 2 hinges for doors ≤900mm height, 3 hinges for doors 900–2100mm, 4 hinges for doors >2100mm. Adjust for alignment after hanging.
· Wall cladding: adhesive bond (MS polymer) to flat substrate, or Z-clips for demountable installation. Leave 3–5mm perimeter expansion gap (hidden by trim).
· Furniture assembly: standard cam-lock or confirmat screw joinery. The aluminum core does not interfere with connector insertion.
We provide a complete fabrication guide with recommended tool settings and hardware compatibility list.

Hot Tags: spc aluminum honeycomb panel, China spc aluminum honeycomb panel manufacturers, suppliers, factory, Al Honeycomb Panel, Alu Honeycomb, Aluminum Honeycomb Composite Panel, aluminum honeycomb panel, Aluminum Honeycomb Plate, Mortise Tenon Joints Honeycomb Panel