Product Parameter Table
|
Product Name |
Aluminum Honeycomb Core - Factory Direct Supply |
|
Brand |
JUSEN |
|
Material Grade |
Aerospace Grade 3003H18 Aluminum Alloy Foil (High-Strength, Corrosion-Resistant, ISO Certified Production) |
|
Core Structure |
Expanded Hexagonal Cell Structure - Uniform Cell Geometry, Consistent Wall Thickness, Full Node Bonding |
|
Weight |
Ultra Lightweight - Density Range 20–80 KG/Cubic Meter (Depending on Cell Size and Foil Thickness; Approximately 97% Air by Volume) |
|
Cell Size Options |
1/4″ (6.4mm), 3/8″ (9.5mm), 1/2″ (12.7mm), 3/4″ (19.0mm) - Imperial & Metric Equivalents Available |
|
Foil Thickness Options |
0.04mm, 0.05mm, 0.06mm, 0.07mm, 0.08mm, 0.10mm (Thicker Foil for Higher Compressive Strength; Thinner Foil for Minimum Weight) |
|
Compressive Strength |
0.5–6.0 MPa (Depending on Cell Size and Foil Thickness; Engineered to Specification for Each Application) |
|
Environmental |
100% Recyclable (Aluminum is Infinitely Recyclable Without Loss of Properties; Minimum 60% Recycled Content in Raw Material) |
|
Use |
Sandwich Panel Core Material, Aerospace Floor Panels & Interiors, Marine Bulkheads & Decks, Architectural Composite Panels, HVAC Airflow Straighteners, EMI/RFI Shielding, Energy Absorption & Impact Protection, Filtration Media, Cleanroom & Laboratory Work Surfaces, Rail & Mass Transit Interiors |
|
Standard Block Size |
Unexpanded Slice: Custom Width × Custom Length; Expanded Block: 1220 × 2440 mm / 1500 × 3000 mm (Custom sizes available; Supplied unexpanded or expanded per customer requirement) |
|
Thickness (Expanded) |
3mm, 5mm, 8mm, 10mm, 12mm, 15mm, 20mm, 25mm, 30mm, 50mm, 100mm (Standard Core Thickness Range; Custom Thickness Available) |
|
MOQ |
100 Square Meter (Factory Direct, Flexible for Trial Orders and Regular Supply) |
|
Sample |
Free Core Sample Available - Cell Size & Foil Thickness Sample Set + Cross-Section Display (Shipping Cost at Buyer's Expense) |
|
Payment |
T/T, L/C, Western Union, Trade Assurance |
|
Packing |
Factory Direct Export Packaging - PE Protective Wrap + Palletized or Crating Depending on Block Size + Weather-Resistant Outer Layer |
Product Introduction
Aerospace Grade 3003H18 • Ultra Lightweight • 100% Recyclable - Factory Direct -
Before the finished panel, before the colored surface, before the architectural installation, there is the core - the aluminum honeycomb that gives every composite panel its strength, its flatness, and its defining lightweight character. Our Aluminum Honeycomb Core is the foundation material supplied factory direct to panel manufacturers, composite fabricators, aerospace suppliers, marine builders, and industrial engineers worldwide. Manufactured from Aerospace Grade 3003H18 aluminum alloy foil - the same grade specified for aircraft floor panels, helicopter rotor blades, and satellite structural components - each honeycomb block begins as thousands of precisely printed and stacked aluminum foil sheets that are expanded to form the iconic hexagonal cell structure. The result is a material that is approximately 97% air by volume, weighs as little as 20 kg/m³, yet provides compressive strength up to 6.0 MPa when engineered with the appropriate cell size and foil thickness. Ultra Lightweight. Aerospace Grade 3003H18. 100% Recyclable. Supplied factory direct in unexpanded slice form for maximum shipping efficiency or in expanded block form ready for your bonding process. This is the core that makes the composite possible - the invisible engineering inside every aluminum honeycomb product.
Detailed Description
Aluminum Honeycomb Core - The Engineering Behind Every Composite Panel
The aluminum honeycomb core is manufactured through a precision industrial process that transforms thin aluminum foil into a three-dimensional structural material. The process begins with Aerospace Grade 3003H18 aluminum alloy foil - a manganese-alloyed aluminum with excellent corrosion resistance, moderate strength, and good workability. The H18 temper indicates full-hard strain-hardened condition, providing maximum foil strength for the core's structural role. Strips of adhesive are printed onto the foil sheets in a precise parallel line pattern, with the line spacing determining the final cell size. The printed sheets are stacked in precise alignment, with each successive layer offset by half the adhesive line spacing so that the adhesive lines fall between the lines of the adjacent sheet. The stack is cured under controlled heat and pressure in a flat-bed press, bonding the sheets together at every adhesive line to create what is called a HOBE (HOneycomb BEfore Expansion) block. This solid block is then sliced to the required thickness and mechanically expanded - pulled apart perpendicular to the adhesive lines - causing the unbonded foil between the adhesive nodes to unfold into the characteristic hexagonal cell geometry. The result is a core material where every cell wall is under precise tension, every node is fully bonded, and the entire structure works together as a unified, three-dimensional truss. This is the same manufacturing process used for aerospace honeycomb cores, adapted for industrial and architectural production volumes while maintaining the material quality and process control that the aerospace heritage demands.
The core's performance is defined by two interacting parameters: cell size and foil thickness, which together determine the core's density, compressive strength, shear strength, and weight. Cell size is specified by the diameter of the inscribed circle within each hexagonal cell - typically expressed in fractional inches following aerospace industry convention. 1/4″ (6.4mm) cells provide the highest density and compressive strength for thin panels requiring maximum surface support, such as aircraft floor panels and high-performance architectural cladding. 3/8″ (9.5mm) cells are the most common general-purpose specification, balancing strength, weight, and cost for architectural panels, furniture cores, and marine applications. 1/2″ (12.7mm) cells reduce weight and cost for thicker panels where surface quality is less affected by cell size. 3/4″ (19.0mm) cells provide the lightest weight for maximum-thickness cores in energy absorption, airflow, and non-structural applications. Foil thickness ranges from 0.04mm (ultra-lightweight, minimum-cost cores for non-structural applications) to 0.10mm (maximum-strength cores for structural sandwich panels requiring the highest compressive and shear performance). The combination of these two parameters creates a design space of approximately 30 distinct core specifications, from 20 kg/m³ (large cells, thin foil) to 80 kg/m³ (small cells, thick foil), with compressive strength ranging from 0.5 MPa to 6.0 MPa. We provide a complete core specification table with density, compressive strength, shear strength, and recommended applications for every cell size and foil thickness combination, enabling engineers to select the optimal core for their specific sandwich panel design requirements.
"Ultra Lightweight" is the core's defining physical characteristic and the property that makes aluminum honeycomb sandwich panels possible. At 20–80 kg/m³, the core is approximately 97% air by volume - only 3% of the core's volume is solid aluminum. This extraordinary lightness is what enables a 10mm aluminum honeycomb sandwich panel to weigh just 4–6 kg/m² while delivering bending stiffness comparable to a solid material many times heavier. The physics behind this performance is well understood: in a sandwich panel, the face sheets carry bending loads (tension on one face, compression on the other), while the core's role is to hold the face sheets at a fixed distance from each other and to transfer shear between them. The farther apart the face sheets are held (i.e., the thicker the core), the greater the panel's bending stiffness for a given face sheet thickness and weight - this is the "I-beam principle" applied to panels. The aluminum honeycomb core achieves this separation with the minimum possible weight because its cellular structure places material only where it is structurally needed - along the load paths between face sheets - leaving empty space everywhere else. This is structural efficiency in its purest form, and it is why aluminum honeycomb cores have been the standard for aircraft flooring since the 1950s: every kilogram saved in the aircraft structure is a kilogram of additional payload or fuel savings over the aircraft's service life. The same principle applies to every downstream application - architectural panels that reduce structural steel requirements, marine bulkheads that increase vessel speed and fuel economy, transport interiors that increase passenger capacity within weight limits, and cleanroom work surfaces that provide the flatness and stability of solid metal at a fraction of the weight.
"Aerospace Grade 3003H18" is not a marketing term - it is a precise material specification that defines the aluminum alloy, its temper condition, and the performance expectations that follow. Alloy 3003 is an aluminum-manganese alloy (nominal composition: 1.2% Mn, 0.12% Cu, balance Al) that offers approximately 20% higher strength than commercially pure 1100 aluminum while maintaining excellent corrosion resistance, formability, and weldability. It is the standard alloy for aircraft honeycomb cores, chemical equipment, and architectural applications where a balance of moderate strength and superior corrosion resistance is required. The H18 temper designation means the foil has been strain-hardened to full-hard condition without subsequent thermal treatment, delivering the maximum tensile strength available from this alloy (minimum 185 MPa ultimate tensile strength). This full-hard temper is essential for honeycomb core performance: the foil must be strong enough to maintain cell wall stability under compressive and shear loading, and the strain-hardened condition provides this strength without the cost, complexity, and potential distortion of heat treatment. The 3003H18 material is compliant with AMS 4348 (Aerospace Material Specification for aluminum honeycomb core) and meets the chemical and mechanical property requirements of ASTM B209 for aluminum sheet and plate. For applications requiring enhanced corrosion resistance (marine, chemical processing, coastal architecture), the core can be specified in alloy 5052 (aluminum-magnesium) with H19 or H39 temper, providing superior resistance to salt water and industrial chemical exposure. We supply both alloy options with full material certification documentation including mill test certificates, chemical composition analysis, and mechanical property test reports for every production batch.
Factory Direct supply means the core material ships from our production line to your manufacturing floor without intermediaries, providing cost efficiency, technical support, and supply chain reliability. The core is supplied in two formats to optimize shipping and integration into your production process. Unexpanded slices (HOBE blocks) are the most cost-effective shipping format - the block is sliced to your specified core thickness but not expanded, occupying approximately 1/20th of its expanded volume. You expand the core at your facility using a simple mechanical expansion process immediately before bonding into your sandwich panels. This format dramatically reduces shipping volume and cost, particularly for international container shipments. Expanded blocks are supplied fully expanded to the final cell geometry, ready for direct integration into your bonding process - preferred by panel manufacturers who want to eliminate the expansion step from their production line. Expanded blocks are supplied in standard sheet sizes (1220×2440mm, 1500×3000mm) or custom dimensions to match your panel production format. Both formats ship with protective packaging appropriate to the product form and shipping distance. Beyond the core material itself, our factory direct relationship includes application engineering support: core specification recommendations based on your panel design requirements (face sheet materials and thicknesses, span between supports, loading conditions, weight targets), bonding process guidance (adhesive selection, application method, curing parameters), and quality documentation packages for your customers' specification and certification requirements. This technical partnership approach distinguishes our factory direct supply from commodity core distributors who provide a product code and a price but no engineering context.
From the sandwich panel manufacturer bonding our 3/8″ 0.07mm core between aluminum face sheets to create the architectural panels that clad a landmark building, to the aerospace supplier integrating our 1/4″ 0.05mm core into aircraft galley floors that must meet FAA flammability requirements at minimum weight, from the marine fabricator using our 5052 alloy core in salt-water-resistant bulkheads for high-speed passenger ferries, to the industrial engineer designing an energy-absorbing crash barrier around our 3/4″ 0.10mm maximum-strength core, our Aluminum Honeycomb Core is the unseen structural foundation inside thousands of finished products across dozens of industries. Aerospace Grade 3003H18. Ultra Lightweight. 100% Recyclable. Factory Direct. Contact our core material sales team today to request your free core sample kit with cell size and foil thickness comparison set, complete core specification and performance data tables, material certification documentation, or a tailored quotation with volume pricing for your core material supply program.




Frequently Asked Questions (FAQ)
Q: 1. What is aluminum honeycomb core and how is it manufactured?
A: Aluminum honeycomb core is a lightweight, three-dimensional cellular structural material manufactured from Aerospace Grade 3003H18 aluminum alloy foil. The manufacturing process involves: printing parallel adhesive lines onto aluminum foil sheets; stacking hundreds of foil sheets in precise alignment with the adhesive lines offset between layers; curing the stack under heat and pressure to bond the sheets at every adhesive node, creating a solid block (HOBE - HOneycomb BEfore Expansion); slicing the block to the required core thickness; and mechanically expanding the slice to unfold the hexagonal cells. The result is a material that is approximately 97% air by volume with a density of 20–80 kg/m³, delivering compressive strength of 0.5–6.0 MPa depending on cell size (1/4″ to 3/4″) and foil thickness (0.04–0.10mm). The core is used as the central layer in sandwich panels, where it separates and transfers shear between two face sheets, providing bending stiffness with minimal weight. Applications include architectural composite panels, aerospace flooring, marine structures, rail interiors, cleanroom surfaces, energy absorption systems, and airflow management products. Supplied factory direct in unexpanded slice form (for maximum shipping efficiency) or expanded block form (ready for bonding).
Q: 2. What are the standard specifications?
A: Common specifications:
• Core thickness (expanded): 3mm, 5mm, 8mm, 10mm, 12mm, 15mm, 20mm, 25mm, 30mm, 50mm, 100mm (standard range; custom thicknesses available up to 500mm)
• Cell size: 1/4″ (6.4mm), 3/8″ (9.5mm), 1/2″ (12.7mm), 3/4″ (19.0mm) - imperial industry standard; metric equivalents available
• Foil thickness: 0.04mm, 0.05mm, 0.06mm, 0.07mm, 0.08mm, 0.10mm (3003H18 alloy; 5052 alloy available for enhanced corrosion resistance)
• Density: 20–80 kg/m³ depending on cell size and foil thickness combination; density calculation table provided in technical datasheet
• Block dimensions (expanded): 1220×2440mm, 1500×3000mm standard; custom L and W dimensions available for production line integration
• Supply form: Unexpanded slice (HOBE block, ~1/20th shipping volume, customer expands before use) or Expanded block (fully expanded, ready for bonding)
• Compressive strength: 0.5–6.0 MPa (stable compressive plateau characteristic of aluminum honeycomb; specific value determined by cell size and foil thickness)
• Core weight: 0.06–0.24 kg/m² per mm of core thickness (e.g., 10mm core at 40 kg/m³ density weighs 0.4 kg/m²; 25mm core at 60 kg/m³ weighs 1.5 kg/m²)
Q: 3. What is the minimum order quantity (MOQ)?
A: The MOQ for core material is 100 square meters of expanded core (or equivalent unexpanded slice volume) per specification (cell size + foil thickness + core thickness). For panel manufacturers and regular industrial users, this is typically a small production batch. For initial evaluation and prototyping, we offer trial quantities of 20–50 m² with flexible terms - contact our core material team to discuss your testing requirements. Volume pricing tiers apply at 500, 1000, and 5000+ m² for regular supply programs. For panel manufacturers establishing a long-term core supply relationship, we offer annual volume agreements with scheduled production slots, buffer stock arrangements, and technical support including core specification optimization for new panel product development. Factory direct supply eliminates distributor margins, providing the most competitive pricing for the specified aerospace-grade material quality.
Q: 4. What are the primary applications for aluminum honeycomb core material?
A: Common applications:
• Architectural sandwich panels: The largest application category - core material bonded between aluminum, steel, stone, glass, or HPL face sheets to produce lightweight rigid panels for building facades, interior walls, ceilings, and column cladding
• Aerospace flooring & interiors: Aircraft cabin floor panels, galley and lavatory composite panels, cargo compartment lining, helicopter rotor blade cores - certified to AMS 4348 and FAA flammability requirements (14 CFR Part 25.853)
• Marine structures: Bulkheads, decks, hatches, and interior partition panels for yachts, ferries, naval vessels, and offshore platforms - 5052 alloy core for salt water corrosion resistance, meeting IMO FTP Code fire safety requirements
• Rail & Mass transit interiors: Train carriage wall panels, ceiling panels, partition walls, and floor panels - lightweight core enabling increased passenger capacity within axle load limits, meeting EN 45545 fire safety standards
• Cleanroom & Laboratory surfaces: Workbench cores, equipment support tables, wall panel systems for semiconductor, pharmaceutical, and biosafety cleanrooms - non-shedding, chemically resistant when bonded with appropriate face sheets, ISO Class 3–8 compatible
• Energy absorption: Crash barriers, impact protection systems, blast mitigation panels, and protective packaging for high-value equipment - the core's stable compressive crushing plateau absorbs impact energy at a controlled rate
• Airflow management: HVAC flow straighteners, wind tunnel flow conditioners, laminar flow elements, and air diffusion panels - the uniform hexagonal cells guide airflow into parallel streams, eliminating turbulence and noise
• EMI/RFI shielding: Electronics enclosure vents, shielded room ventilation panels, and equipment cabinet doors - the conductive aluminum cell structure acts as a waveguide-below-cutoff array, blocking electromagnetic interference while allowing airflow
Q: 5. How does aluminum honeycomb core compare to other core materials?
A: ① Aerospace Grade 3003H18: Certified aluminum alloy with full material traceability vs. commodity aluminum honeycomb from uncertified sources with unknown alloy composition and inconsistent mechanical properties
② Ultra Lightweight: 20–80 kg/m³ density (97% air) vs. balsa wood core at 100–150 kg/m³, PVC/PET foam cores at 60–200 kg/m³, and polypropylene honeycomb at 80–120 kg/m³ - aluminum provides the lowest density for a given compressive strength
③ Fire performance: Non-combustible aluminum vs. combustible polymer foam cores (PVC, PET, PU), balsa wood, and aramid paper (Nomex) cores - A2 classification achievable in finished sandwich panels without fire-retardant additives that degrade over time
④ Temperature resistance: Service temperature up to 200°C continuous vs. polymer foams limiting at 70–120°C and paper/resin cores at 120–180°C - aluminum core compatible with high-temperature adhesive curing cycles and elevated service environments
⑤ Moisture resistance: Zero moisture absorption vs. balsa wood (absorbs water, rots), aramid paper (hygroscopic, loses strength when wet), and open-cell foams (water absorption) - stable mechanical properties in humid and wet environments without edge sealing
⑥ Chemical resistance: Aluminum alloy naturally corrosion-resistant vs. polymer foams susceptible to solvent and chemical attack - compatible with a wide range of adhesive chemistries (epoxy, polyurethane, phenolic, neoprene) without core degradation
⑦ 100% Recyclable: Aluminum is infinitely recyclable without property loss vs. polymer foam cores (non-recyclable, landfill), balsa wood (limited recycling), and composite cores (difficult to separate and recycle) - minimum 60% recycled content in raw material supporting circular economy objectives
Q: 6. What surface finishes are available?
A: • 1/4″ (6.4mm) cells: Highest density, finest surface support for thin panels with demanding flatness requirements. Recommended foil: 0.05–0.07mm. Typical applications: aircraft floors, high-end architectural panels, thin decorative panels <8mm total thickness.
• 3/8″ (9.5mm) cells: Best all-around specification, balances strength, weight, cost, and surface quality. Recommended foil: 0.05–0.08mm. Typical applications: architectural wall cladding, ceiling panels, furniture panels, marine bulkheads - the most popular specification.
• 1/2″ (12.7mm) cells: Lower density, reduced cost for thicker panels. Recommended foil: 0.06–0.10mm. Typical applications: thick architectural panels >15mm, structural sandwich panels, industrial work surfaces, cleanroom tables.
• 3/4″ (19.0mm) cells: Lowest density, maximum weight savings for non-surface-critical applications. Recommended foil: 0.07–0.10mm. Typical applications: energy absorption, airflow straighteners, EMI shielding vents, non-structural spacers and fillers.
• Foil thickness selection: 0.04mm - ultra-light non-structural; 0.05mm - general lightweight architectural; 0.06mm - balanced architectural/industrial; 0.07mm - general structural; 0.08mm - heavy-duty architectural; 0.10mm - maximum structural and impact applications.
• Alloy options: 3003H18 (standard aerospace/architectural, manganese-alloyed for strength and corrosion resistance); 5052H19/H39 (marine/chemical, magnesium-alloyed for superior salt water and chemical resistance, approximately 10–15% higher cost than 3003).
• Perforated core option: Core can be supplied with micro-perforations in the cell walls for acoustic applications - the perforations create a Helmholtz resonator effect within each cell, providing broadband sound absorption when integrated into acoustic sandwich panel designs.
Q: 7. What are the advantages of ordering unexpanded core slices vs. expanded blocks?
A: The choice between unexpanded slices (HOBE blocks) and expanded blocks depends on your production setup, shipping logistics, and volume requirements. Unexpanded slices are the most shipping-efficient format: a HOBE block occupies approximately 1/20th of its expanded volume because the foil sheets are still stacked flat, bonded only at the adhesive nodes. For international container shipments, this means 20 times more core material per container compared to expanded blocks - reducing shipping cost per square meter by up to 95% for the core portion of the logistics cost. The trade-off is that you must expand the core at your facility using a simple mechanical expansion frame. The expansion process is straightforward: the slice is clamped along two opposite edges and pulled apart perpendicular to the adhesive lines, causing the unbonded foil between nodes to unfold into hexagons. The process takes a few minutes per block and requires no heat, chemicals, or specialized skills. Once expanded, the core must be stabilized (held in the expanded position, typically by a light adhesive spray or by immediate bonding into the sandwich panel) to prevent spring-back. Expanded blocks are more expensive to ship but arrive ready for immediate integration into your bonding process - no expansion equipment, no expansion labor, no stabilization step. This format is preferred by panel manufacturers with high-volume production lines where the incremental shipping cost is offset by the eliminated in-house expansion labor and process time. We supply both formats and can provide expansion equipment recommendations and process guidance for customers transitioning from expanded to unexpanded supply for cost optimization.
Q: 8. How is the core bonded into a finished sandwich panel?
A: Standard bonding process for aluminum honeycomb sandwich panels:
• Adhesive application: Structural film adhesive (epoxy or modified epoxy) is the industry standard for architectural and aerospace panels. The adhesive film is placed between the core and each face sheet. Alternative options include two-part liquid adhesives applied by roller or spray, and hot-melt polyurethane reactive (PUR) adhesives for high-speed production lines.
• Curing: The sandwich assembly (face sheet + adhesive + core + adhesive + face sheet) is placed in a flat-bed press or vacuum table under controlled heat (120–180°C depending on adhesive system) and pressure (0.1–0.5 MPa) for the specified cure cycle. The heat activates the adhesive, which flows to form fillets at each cell wall-to-face sheet contact point, creating the structural bond.
Critical process parameters: adhesive must form a fillet at each cell wall contact point (not just a coating on the cell wall edge) for maximum bond strength; core must be clean and dry (degreased if necessary) before bonding; face sheets must be properly prepared (abraded, chemically etched, or primed) per the adhesive manufacturer's specification; bond line thickness should be controlled to 0.1–0.3mm for optimal strength; and the finished panel should be allowed to post-cure at ambient temperature for 24–48 hours before fabrication. We provide detailed bonding process guidelines, adhesive recommendations matched to your production equipment and panel performance requirements, and technical support for troubleshooting bond quality issues. For customers new to honeycomb sandwich panel production, we can provide on-site training and process development support during initial production setup.
Q: 9. What is the typical production lead time?
A: • Standard stock core specifications (3/8″ cells, 0.06mm foil, 10/12/15mm thickness) in standard block sizes: 5–7 working days (buffer stock maintained for most common architectural panel core specifications)
• Custom cell size/foil thickness combination within standard alloy and thickness range: 10–15 working days
• Large-volume production order or custom alloy specification (5052): 18–30 working days (includes material procurement, production scheduling, and quality certification documentation)
Actual lead times depend on current order volume and production schedule. Rush orders can often be accommodated - please inform our team of your deadline when placing the order. We will confirm a precise delivery schedule in the sales contract.
Q: 10. How are the panels packaged and shipped?
A: Core material packaging varies by supply format: Unexpanded slices (HOBE blocks) are the most compact format - solid aluminum foil blocks with exposed bonded edges. Each block is wrapped in protective PE film, stacked on fumigated wooden pallets, and secured with strapping. Due to the high shipping density (20× volume efficiency vs. expanded core), HOBE blocks typically achieve 80–90% container volume utilization. Expanded blocks are significantly more volume-intensive but are shipped flat-stacked on fumigated pallets with protective wrapping to prevent cell wall damage during transit. Multiple core specifications (different cell sizes, thicknesses) are packed with clear specification labels. All pallets are labeled with: customer purchase order, core specification (alloy, cell size, foil thickness, core thickness, dimensions, quantity), and batch number for full material traceability.
Shipping options:
• Sea freight: FCL (20GP/40HQ) or LCL - unexpanded HOBE blocks are the most container-efficient format (approximately 20× higher density than expanded blocks); recommended for regular international supply
• Express courier: DHL, FedEx, UPS - for core sample sets, trial quantities, and urgent small-volume shipments (typically unexpanded slice format for shipping efficiency)
• Rail freight: Available for Europe and Asia routes - suitable for regular mid-volume supply to panel manufacturers and composite fabricators
We partner with international freight forwarders experienced in industrial material logistics for manufacturing supply chains worldwide. All shipments include complete material certification documentation: mill test certificates (chemical composition, mechanical properties) for the aluminum foil lot, core specification and dimensional conformance report, and material safety data sheets. Shipments are fully insured. For panel manufacturers and industrial users establishing a regular core supply program, we offer scheduled production slots and just-in-time delivery aligned with your manufacturing calendar. We recommend maintaining 2–4 weeks of safety stock for regular production and ordering buffer quantities for new product development and prototyping. Consistent material quality and specification matching are guaranteed for all repeat orders within the same alloy, cell size, and foil thickness specification.
Hot Tags: aluminum honeycomb core material, China aluminum honeycomb core material manufacturers, suppliers, factory, aluminum core material foil 0 04mm, aluminum hexagonal core expanded sheet, Aluminum Honeycomb, Aluminum Honeycomb Core Material, Aluminum Honeycomb Material, Expanded Aluminum Honeycomb





