Wholesale Custom Multi-Thickness Aluminum Laser-Welded Panel
Wholesale Custom Multi-Thickness Aluminum Laser-Welded Panel

Wholesale Custom Multi-Thickness Aluminum Laser-Welded Panel

Our multi-thickness all-aluminum laser-welded panels give specifiers one coordinated material family across a full range of section depths, from a slim 9 mm board for ceiling planes and light cladding up to a rigid 25 mm board for cabinet doors, washroom partitions and door cores. Every board is built on an extruded hollow multi-cavity aluminum core reinforced with integrated vertical stiffener ribs.
Send Inquiry

Product Name

Multi-Thickness All-Aluminum Laser-Welded Panel

Core Structure

Extruded hollow multi-cavity aluminum core, continuous laser welded

Joint System

Seamless butt joint with concealed dry-fix clip system, no visible fasteners

Edge Detail

Laser-welded machined edge, no edge banding strip and no adhesive line

Wall Thickness

1.0 mm nominal aluminum wall thickness (high rigidity, impact resistant)

Panel Thickness

9 mm / 12 mm / 18 mm / 25 mm - thicker sections carry a deeper cavity and stronger ribs

Standard Width

150 mm / 300 mm / 450 mm / 600 mm / 1220 mm modular widths

Standard Length

2400 mm / 3000 mm / 4000 mm (custom cut-to-size up to 6000 mm)

Surface Finishes

Wood grain film, architectural matte coating, anti-scratch and anti-fingerprint layer

Colour Range

200+ RAL and Pantone architectural colours, wood grain and solid tones

Internal Reinforcement

Integrated vertical stiffener ribs (alloy 6063-T5)

Eco Performance

Zero Formaldehyde (Grade ENF), non-toxic, odourless, 100% recyclable all-aluminum

Moisture & Rot Resistance

100% waterproof, zero swelling, zero mould growth, termite proof

Fire Performance

Class A2 Non-Combustible (EN 13501-1)

Load Rigidity

100 kg+ per sqm; flat spans with no sagging or warping

Delamination Risk

100% adhesive-free laser welding; no glue line, no delamination

Manufacturing Capacity

20,000 sqm intelligent factory, 12 automated laser-welding lines, 1,500,000 sqm annual capacity

Global Supply & Export

Export to 80+ countries worldwide in seaworthy wooden crates

Minimum Order Quantity

MOQ 500 sqm per thickness / colour / specification

Regulatory Certifications

CE · RoHS certified; test report on request

Lead Time & Delivery

Fast delivery; project batch schedules supported

 

Product Overview

 

Our multi-thickness all-aluminum laser-welded panels give specifiers one coordinated material family across a full range of section depths, from a slim 9 mm board for ceiling planes and light cladding up to a rigid 25 mm board for cabinet doors, washroom partitions and door cores. Every board is built on an extruded hollow multi-cavity aluminum core reinforced with integrated vertical stiffener ribs.

The thicker sections are engineered rather than simply scaled: the cavity is deeper and the rib proportion stronger, which is what keeps long spans flat under load. All thicknesses share the same adhesive-free continuous laser welding, the same wood grain and matte finish range, and the same concealed dry-fix jointing, so a single project can be resolved as one system without mixing suppliers.

 

Detailed Description

 

Specifiers usually choose a panel by finish and then discover, too late, that the available thickness cannot carry the span or the fitting they had in mind. The multi-thickness structural all-aluminum laser-welded panel removes that constraint by producing the same welded extrusion in 9 mm, 12 mm, 18 mm and 25 mm sections, so a slim ceiling plane, a mid-weight wall cladding and a heavy cabinet door can all come from one material family. Because the face skin and the hollow multi-cavity core are fused by a continuous laser seam instead of adhesive, thickness is gained as solid metal structure rather than as an additional glue layer, and there is no bonded interface that can ever separate.

Each section is engineered rather than simply scaled up. The thicker boards carry a deeper cavity and a stronger vertical stiffener rib proportion, which is what delivers a load rigidity of 100 kg+ per square metre and keeps long spans perfectly flat with no sagging, warping or oil-canning. The cut edge is machined and welded, so there is no edge banding strip to lift and no laminate line to telegraph through the surface. Joints are executed as a hairline seamless butt using concealed dry-fix clips, with matching internal corners, external corner trims and crown profiles available to close the system cleanly.

The material is fully inorganic, which resolves the maintenance problems that follow engineered wood into wet and high-traffic interiors. It is completely waterproof, does not swell, does not support mould or termite activity and wipes clean with a damp cloth after coffee, ink or grease marks. Grade ENF zero-formaldehyde emission means no volatile organic compounds and no odour, so occupied rooms can be handed over immediately after installation, while Class A2 non-combustible fire performance under EN 13501-1 provides non-combustible envelope compliance with no flaming droplets and no toxic combustion gases.

Supplying a coordinated four-thickness system reliably depends on manufacturing depth. Every multi-thickness structural all-aluminum laser-welded panel is produced in a 20,000 sqm intelligent manufacturing plant running 12 automated laser-welding lines with an annual capacity of 1,500,000 sqm, and is exported to more than 80 countries worldwide. OEM and ODM support covers custom panel thicknesses, cut-to-size lengths, CNC grooving, edge folding, private label carton printing, RAL or Pantone colour matching and free samples against a project reference, subject to an accessible MOQ of 500 sqm per thickness and colour, seaworthy crate packing and full CE and RoHS international regulatory compliance.

 

Ordering Information

 

• Minimum Order Quantity (MOQ): 500 sqm per thickness / colour finish / specification.

• Thickness Options: 9 mm, 12 mm, 18 mm and 25 mm standard; intermediate sections on request.

• Custom Dimensions: Widths from 150 mm to 1220 mm; lengths from 2400 mm to a maximum of 6000 mm, cut to size after welding.

• Colour Selection: Over 200 architectural RAL and Pantone finishes, including wood grain, beige, greige, brushed aluminum and white matte.

• Installation Hardware: Matching concealed clips, starter profiles, internal and external corner trims, joint trims and crown mouldings available.

• Export Packaging: Seaworthy reinforced wooden cases with protective peel-off surface film and corner edge protection.

• International Compliance: CE · RoHS certified; official test reports for Class A2 fire rating, Grade ENF formaldehyde emission and load capacity available upon project request.

 

443-detail-1-main

443-detail-2-specification

443-detail-3-application

 

FAQ

Q1: How do I choose between the 9 mm, 12 mm, 18 mm and 25 mm sections?

A: Choose by span, load and fitting rather than by appearance, because every thickness shares the same finish range. The 9 mm and 12 mm boards suit ceiling planes, light cladding and low-load decorative panels where minimum weight and a slim sight line matter. The 18 mm and 25 mm boards are intended for cabinet doors, washroom partition leaves and door cores, where the panel must hold a hinge, resist impact and stay flat across a long unsupported span. Our engineers will confirm the recommended section once we see your drawings.

Q2: What is the advantage of laser welding over adhesive bonding, and does it affect thickness?

A: An adhesive-bonded panel gains its thickness partly from a glue layer, and that layer is the interface that eventually fails, discolours or emits volatile compounds. With continuous laser welding the face skin and the hollow multi-cavity core become a single aluminum body, so the full thickness is structural metal. There is no bonded interface, no edge banding to lift, no delamination path and no formaldehyde or VOC contribution from bonding chemistry.

Q3: Are these boards suitable for washroom partitions and other wet areas?

A: Yes. The board is entirely extruded aluminum alloy 6063-T5 with a sealed architectural coating, so it does not absorb water, does not swell at the cut edge and does not support mould or bacterial growth on the substrate. This makes it suitable for commercial washroom partitions, shower cubicles, healthcare interiors and coastal projects, where an engineered wood core would quickly deteriorate at the fixings and edges.

Q4: Can different thicknesses be mixed within one project or one container?

A: Yes. Because all four sections come from the same extrusion platform and the same coating line, you can specify thick boards for the doors and partitions, medium boards for wall cladding and thin boards for the ceiling of the same building, and the finishes will still match visually. Mixed thickness and mixed colour container loading is supported on qualifying order quantities.

Q5: How do you guarantee the colour matches when I reorder later?

A: All panels in an order are coated from the same colour batch. For multi-phase projects we retain the coating formulation and record your batch reference, so a later delivery can be produced against the original sample. Free colour samples are issued before production so the finish can be approved on site in the actual lighting conditions, and CE and RoHS documentation is supplied with every shipment.

Hot Tags: wholesale custom multi-thickness aluminum laser-welded panel, China wholesale custom multi-thickness aluminum laser-welded panel manufacturers, suppliers, factory, aluminium solid panel, aluminum panel custom cut size, Aluminum Solid Panel, Aluminum Substrate, Durable Solid Aluminium Panels for Aluminium Cladding, Solid Aluminum Panel